injen technology SP1567 Installation Instructions
Text of the manual
Part number SP1567
2001-05 Honda Civic
Ex, Lx, Dx
1.6L, 4 cyl.
1- Two piece cold air intake (CA)
1- 3” Small Injen filter (#1020)
1- 3” straight hose (#3044)
1- 8” 15mm vacuum hose (#3079)
1- 2 1/2” X 2 3/4 ” 90 degree (#3097)
elbow with 1525 grommet (#6014)
2- Power-Bands (.040)(.
Screw the first vibra-mount into the stock air box
brace located by the firewall and the throttle body.
Both vibra-mounts are now installed and ready for the
next step.
Place the one clamp on each end of the 90 degree
elbow. Place the 90 degree elbow over the throttle
body then semi-tighten the clamp on the throttle
body. Press the grommet into the 3/4”
Once the filter has been installed on the secondary intake lower the filter end
into the compartment below the battery tray.
Line up the intake bracket to the vibra-mount stud and use a fender washer and a
flange nut to secure the intake in place.
To continue the installation of the cold air intake take the 3” straight hose and
press it over the end of the
1. Upon completion of the installation, reconnect the negative battery terminal before you
start the engine.
2. Align the entire intake system for the best possible fit. Once the intake has been properly
fitted continue
to tighten all nuts, bolts and clamps.
3. Periodically, recheck the alignment of the intake system and make sure there is proper
clearance
