Mastech MS5308 Manual 

2. Safety instructions: Operating environment and condition: ● Elevation ＜2000 m ● Relative humidity (RH) ≦ 80%RH ● Operating temperature 0 – 40°C Note: DO NOT input voltage at the measurement port. When measuring capacitance, please discharge first then measure, otherwise, the meter will be damaged. Storage and maintenance: Do not use alcohol or other solvents to clean the meter. If it will not be used for long time, please remove battery and put the meter in a dry and clean environment. 3. Description: 3.1 Definition Description APO: Auto power off LCR: This charact ...

to select parameters, and the sample value and error will display on the LCD. You can modify sample value and error by operating direction arrows. Select the modification item by operating Ok button, and confirm the settings. Press Comparison button again to quit selection mode. 6.4. Deviation proportion measurement When the instrument is turned on, the instrument will switch to single measurement mode for the objects to be tested. Insert reference object in measurement port, press Relevant Measurement button to save the current vale (DCUR) as reference value (DREF). At this time ...

Table 3. Inductance measurement scope Note: This accuracy is the measurement standard. When D <0.1, if D> 0.1, it should be multiplied by the extraction Measurem Measurement Measureme Resoluti Accuracy LS/LP 100Hz/120 20.000mH 1uH 1.0%+5d 100Hz/120 200.00mH 0.01mH 0.5%+5d 100Hz/120 2000.0mH 0.1mH 0.5%+5d 100Hz/120 20.000H 1mH 0.5%+5d 100Hz/120 200.00H 0.01H 1.0%+5d 100Hz/120 2000.0H 0.1H 1.0%+5d 100Hz/120 20.000kH 1H 2.0%+5d 1kHz 2000.0uH 0.1uH 1.0%+5d 1kHz 20.000mH 1uH 0.5%+5d 1kHz 200.00mH 0.01mH 0.5%+5d 1kHz 2000.0mH 0.1mH 1.0%+5d 1kHz 20.000H 1mH 1.0%+5d 1kHz 200.00H 0.01H 2.0 ...

Table 2 Capacitance measurement scope Note: This accuracy is the measurement standard. When D <0.1, if D> 0.1, it should be multiplied by the extraction of a root of 1 + D2 Measurem Measurement Measure Resoluti Accuracy CS/CP 100Hz/120 20.000nF 1pF 1.0%+5d 100Hz/120 200.00nF 0.01nF 0.5%+5d 100Hz/120 2000.0nF 0.1nF 0.5%+5d 100Hz/120 20.000uF 1nF 0.5%+5d 100Hz/120 200.00uF 0.01uF 1.0%+5d 100Hz/120 2000.0uF 0.1uF 2.0%+5d 100Hz/120 20.00mF 0.1mF 2.0%+5d 1kHz 2000.0pF 0.1pF 1.0%+5d 1kHz 20.000nF 1pF 1.0%+5d 1kHz 200.00nF 0.01nF 0.5%+5d 1kHz 2000.0nF 0.1nF 0.5%+5d 1kHz 20.000uF 1nF 0.5% ...

Click finish, and the following icon will show on the desk Installation complete 9 Data transmission: Press Communication button. The RS232 symbol will show on the LCD display. At this time, you can send data via infrared port. Connect the infrared communication line between computer and MS5308. When the software is opened on the computer, the screen is shown as following Figure . Click CONNECT in the Ⅰ screen, the screen will be shown as following Figure , and start Ⅱ receiving data. The number of data recording groups can be up to 50000. Click the storage mark on the screen ...

Table 3. Inductance measurement scope Note: This accuracy is the measurement standard. When D <0.1, if D> 0.1, it should be multiplied by the extraction Measurem Measurement Measureme Resoluti Accuracy LS/LP 100Hz/120 20.000mH 1uH 1.0%+5d 100Hz/120 200.00mH 0.01mH 0.5%+5d 100Hz/120 2000.0mH 0.1mH 0.5%+5d 100Hz/120 20.000H 1mH 0.5%+5d 100Hz/120 200.00H 0.01H 1.0%+5d 100Hz/120 2000.0H 0.1H 1.0%+5d 100Hz/120 20.000kH 1H 2.0%+5d 1kHz 2000.0uH 0.1uH 1.0%+5d 1kHz 20.000mH 1uH 0.5%+5d 1kHz 200.00mH 0.01mH 0.5%+5d 1kHz 2000.0mH 0.1mH 1.0%+5d 1kHz 20.000H 1mH 1.0%+5d 1kHz 200.00H 0.01H 2.0 ...