Maxxus MX 20.0 Installation And Operating Manual

Insert the mains adapter plug into socket (1) located on the back of the chair. Push the electrical plug into the socket and switch on the device at the power switch (2) Remote Control Use ...

− The maintenance of the device may only be carried out by qualified personnel. Please do not disassemble or try to maintain the device yourself. Exceptions are only small maintenance works or repairs under the instruction of a technician of the supplier. − Do not forget to turn off the power to the device at the mains after use. − Do not use the device if the electrical plug is loose in the socket. − If the chair is not to be used for a long period of time, roll up the cable and store it in a dry and dust-free place. − Do not expose the device to hi ...

Part Description 1 Foot massage component 2 Front cover component 3 Back rest cylinder 4 Foot rest pushing arm 5 Air pump valve component 6 Foot rest cylinder 7 Seat side airbag 8 Seat frame side cover component (right) 9 Arm rest steel component 10 Right arm rest 11 Connecting component (right) 12 Space capsule base install component (right) 13 3D massage mechanism component 14 Upper arm component (right) 15 Steel frame 16 Back cushion 17 Back frame component 18 Head cushion 19 Space capsule component 20 Up back cover 21 Power wire 22 Remote control component 23 Seat frame ...

Position correct Position too low 9 ENG II Starting the Massage 1. Press the red power button to activate your massage chair. The chair will initially automatically be in the correct position. 2. To start the fully automatic body measurement, select a massage program. You can select any program to start the body measurement detection and then change the massage program again if required. 3. The determination of the sitting position / height and the resulting massage points is done automatically. Please wait until the automatic detection is completed. This ...