Telit Wireless Solutions LN940A11 SERIES Operation & User’s Manual

2018-07-02 0 QCI is selected by network 1-4 Value range for 95uaranteed bit rate Traffic Flows 5-9 Value range for non-guarenteed bit rate Traffic Flows - A numeric parameter which indicates DL GBR in case of GBR QCI. The value is in kbit/s. This parameter is omitted for a non-GBR QCI. (see 3GPP TS 24.301 [83]) - A numeric parameter which indicates UL GBR in case of GBR QCI. The value is in kbit/s. This parameter is omitted for a non-GBR QCI. (see 3GPP TS 24.301 [83]) - A numeric parameter which indicates DL MBR in case of GBR QCI. ...

2018-07-02 Syntax Type Command Possible Return Result Instruction Exec Command AT+SKUID HW Revision: SW Revision: OK Parameter Description parameter Value Instruction - Current HW vision - Current SW vision Example AT+SKUID HW Revision: V000 SW Revision: T77W676.F0.0.0.0.1.GC.001 OK Current HW vision Current SW vision 15.6. AT^GETIMEI Get the IMEI Value AT^GETIMEI command is used to get the IMEI value Syntax Type Command Possible Return Result Instruction Exec Command AT^GETIMEI OK Success +CME ERROR: m ...

2018-07-02 6.11. AT+CSTF Settings Time Format This set command sets the time format of the time information presented to the user, which is specified by use of the parameter. The affects the time format on the phone display and doesn’t affect the time format of the AT command serial interface, so it is not actually used. Read commands reads the current setting. Test command reads the supported s. Syntax Type Command Possible Return Result Instruction Test Command AT+CSTF=? +CSTF: list OK - Read Command AT+CSTF? +CSTF: OK ...

2018-07-02 Syntax Type Command Possible Return Result Instruction Exec Command AT&F[] OK - Parameter Description parameter Value Instruction [0] Reset parameters to their factory default values 4.14. ATI Display Product Identification Information The ATI execute command delivers a product information text. Syntax Type Command Possible Return Result Instruction Exec Command ATI Manufacturer: XXX Model: XXX Revision: XXX IMEI: XXX +GCAP: XXX OK Display production information Example: ATI Manufacturer: QUALCOMM INCORPORATED Model: 4105 Revision: ...

2018-07-02 10.12. AT+CGEREP Packet Domain Event Reporting The set command enables or disables sending of unsolicited result codes, +CGEV: XXX from MT to TE in the case of certain events occurring in the Packet Domain MT or the network. controls the processing of unsolicited result codes specified within this command. controls the effect on buffered codes when 1 or 2 is entered. If a setting is not supported by the MT, ERROR or +CME ERROR: is returned. The read command returns the current mode and buffer settings. The test command returns ...

2018-07-02 Example: AT+CUAD +CUAD: “611D4F10A0000000871002FF86FFFF89FFFFFFFF5009556E6976657253494DFF” OK AT+CEAP = “4F10”, “12”, “0101000BA0000000871002” +CEAP: 85165636,”020100060312” OK AT+CERP=85165636,3 +CERP: “34363030313637373735313136” OK AT+CERP =85165636,2 +CERP: “01” OK ...