One Stop Gardens 04249 Assembly Instructions

Visit our Web site at http://www.harborfreight.com Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions please call 1-800-444-3353 MINI GARDEN BISTRO FURNITURE SET 4 PIECE SET ®

SPECIFICATIONS SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. SAFETY WARNINGS AND PRECAUTIONS 1. KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries. Place product on flat, level surface such as carpet or grass. Concrete could hurt child if chairs or bench is tipped over. 2. KEEP CHILDREN AWAY FROM PRODUCT DURING ASSEMBLY. Do not allow children to use until all hardware in this product is fully assembled and tightened. 3. DO NOT ATTEMPT TO ASSEMBLE THIS PRODUCT IF UNDER THE INFLU- ENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to assemble this product. 4. USE EYE PROTECTION. Wear ANSI approved safety impact goggles when assembling this product. Goggles are available from Harbor Freight Tools. 5. PERIODICALLY CHECK. Check Bolts and Nuts periodically to be sure hardware has not loosened. 6. STAY ALERT. Watch what you are doing at all times. Use common sense. Do not assemble this product when you are tired or distracted from the job at hand. 7. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. Cast Aluminum White Glossy Enamel Flower Design 22-1/2"L X 13"W X 22-3/8"H 11-1/4"L X 10-1/2"W X 21-1/4"H 18-3/4"Dia. X 16-1/2"H Construction Finish Design Bench Dimensions Chair Dimensions Table Dimensions Item Discription

replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. 9. THIS PRODUCT IS MANUFACTURED OF CAST ALUMINIUM PARTS AND IS BRITTLE. Do not force any part of the assembly and do not overtighten the bolts. Serious damage can occur. Do not stand on Chair, Bench, or Table. Use only for intended purpose. Chairs are not made for adults. Injury could occur if Chair is overloaded. Use caution! 10. RECOMMENDED AGE APPROPRIATE USE is 4–7 year old children. Weight range, 30 to 70 lbs. on Chairs. Maximum weight for Bench is 100 lbs. UNPACKING When unpacking, check to make sure all parts shown on the Parts List (page 5) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY INSTRUCTIONS We suggest you assemble the unit on a soft surface to avoid damage to the finish. SKU 04249 PAGE 3 1. Position the Back Rest (#A1) by inserting the cast aluminum pegs into the holes in the Bench Seat (#C1). Attach the Bench Seat (#C1) to Back Rest (#A1) using Screw (#1), Washer (#2), and Nut (#3). See Figure 1, Figure 2 and 3. 2. Attach the Legs (#D1) in eight places using Bolts (#4), Washer (#2), and Nut (#3). See Figure 1 and 2. 3. Attach Bench Arm Rests (#B1) to Back Rest (#A1) and Seat (#C1) using Screws (#1), Washers (#2), and Nuts (#3). Use the white Screws, Washers, and Nuts on the back of the Back Rest (#A1) where they are visible. Shown in Figure 3. ASSEMBLY OF BENCH #C1 Seat #4, #2, #3 #1, #2, #3 (white) #1, #2, #3 #A1 Back Rest #B1 Arm Rest #A1 Back Rest Figure 2 Figure 3 #D1 Leg #4, #2, #3 (View from underneathbench) #1, #2, #3 #C1 Seat Figure 1 #C1 Seat

1. Place the Legs (#C3) in four places on the Seat (#B3) using Screws (#1), Washer (#2) and Nuts (#3). See Figure 4. CHAIR ASSEMBLY Figure 4 2. Attach Back Rest (#A3) in two places on the Seat (#B3) using Screws (#1), Washer (#2) and Nuts (#3). See Figure 5. Figure 5 #1, #2, #3 #1, #2, #3 #C3 #B3 #A3 1. Place the Legs (#B2) in four places on the Table Top (#A2) using Bolts (#1a), Washer (#2) and Nuts (#3). See Figure 6. TABLE ASSEMBLY 2. When assembly is completed on the Chairs, Bench, and Table, place black PVC Stoppers (#5) on all Legs. Tap on tightly. See Figure 7. Figure 7 #1a, #2, #3 #1a, #2, #3 Figure 6 #5 #5 #B2 #A2 #B3

ASSEMBLY ILLUSTRATION A1 Back Rest Arm Rest Seat Leg Screw (6X25MM) Washer Nut Bolt (6X25MM) PVC Stoppers PART # DESCRIPTION QTY A1 B1 C1 D1 1 2 3 4 5 1 2 1 4 2 14 14 8 16 Table Top Leg Bolt (6X30MM) Washer Nut PART # DESCRIPTION QTY A2 B2 1a 2 3 1 3 6 6 6 Back Rest Seat Leg Screw (6X25MM) Washer Nut PART # DESCRIPTION QTY A3 B3 C3 1 2 3 2 2 8 8 12 12 DRAWING OF BENCH DRAWING OF TABLE DRAWING OF CHAIR MAINTENANCE 1. For better and safer performance, keep all parts of this product clean and dry at all times. THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. A3 B3 C3 1 2 3 1 2 3 1a 2 3 A2 B2 B1 C1 D1 4 2 3 DRAWING OF CHAIR DRAWING OF TABLE DRAWING OF BENCH 5 5 5