Mio MiVue 785 Quick Start Manual

4 Microphone 5 Touch screen 6 System indicator 7 Shutdown button 1 Mini-USB connector 2 AV-out connector (for selected models only) 3 Device mount socket 8 Speaker 9 Camera lens 10 Power button 11 Memory card slot Using your dash cam in a vehicle Precautions and notices l Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage. l A window mount is needed when using the dash cam in a car. Make sure that you place the dash cam in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags. l Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please keep the lens clean. l If the car’s windscreen is tinted with a coating, it may impact the recording quality. l To ensure the highest quality recordings, you are advised to place the dash cam near the rear view mirror. l Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s field of vision is blocked. l If the car’s windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your device where there is a “clear area.” l The system will automatically calibrate the G sensor of the device during start-up. To avoid G sensor malfunction, always turn the device on AFTER you mount it in the vehicle properly. Make sure that your car is parked on level ground. Follow the instructions to securely mount your dash cam in a vehicle. 1. Mount the dash cam. 2. Adjust the lens angle. 3. Connect the cables. TM TM 785 Quick Start Guide 5 6 1 5 N 5 6 8 0 0 1 2 R 0 0 Inserting a memory card The dash cam supports the Class 10 memory cards with 8 GB – 128 GB capacity. Hold the card (MicroSD) by the edges and gently insert it into the slot as shown in the illustration. To remove a card, gently push the top edge of the card inwards to release it and pull it out of the slot. Formatting a card To format a memory card (all data will be erased), tap > > . 2 1 2 3

Once the vehicle engine is started, the dash cam automatically turns on. Press and hold the Power button for 2 seconds to manually turn the dash cam on and off. When the dash cam is turned on, press the power button to switch the LCD screen on and off. Recording Continuous recording By default, the system will automatically start continuous recording in few seconds after start-up. Event recording By default, if an event happens such as sudden impact, high-speed driving, an aggressive turn or an accidental crash during continuous recording, the G sensor will prompt the dash cam to start an event recording. If you want to manually start an event recording while continuous recording is in progress, tap on the recording screen. Parking recording Note: This feature is not available for all models. You must use an additional power source to record the video during Parking mode, such as Mio Smart Box uninterruptible power cable which is sold separately. Enable parking recording by tapping > > > > . Camera mode l If the recording is in progress, tap to take a photo. (This function is not available when the rear camera is connected.) l Tap > > . Playback mode 1. Tap > . 2. Select the desired type. 3. Tap the desired file to start playback. System settings Note: Not all setting items and options are available for all models. To customise the system settings, tap > > . MiVue Manager MiVue Manager™ is a tool for you to view the videos recorded on a MiVue dash cam. Download MiVue Manager from the Support page of Mio™ website (www.mio.com/support) and follow the on- screen prompts to install it. For more information Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. You can download the latest User Manual of your product from Mio website (www.mio.com). Not all models are available in all regions. Specifications and documents are subject to change without notice. MiTAC does not warrant this document is error-free. MiTAC assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the device and the documents. About GPS l GPS is operated by the United States government, which is solely responsible for the performance of GPS. Any change to the GPS system can affect the accuracy of all GPS equipment. l GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or building, GPS positioning is not available. Signal reception can be affected by situations such as bad weather or dense overhead obstacles (e.g. trees, tunnels, viaducts and tall buildings). l The GPS positioning data is for reference only. Declaration of conformity For regulatory identification purposes, MiVue 785 is assigned a model number of N568. Hereby, MiTAC declares that this N568 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Visit Mio website (www.mio.com) for the full text of the declaration for your device. WEEE This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point. Revision: R00 (10/2017)