numskull Batch SYET0318 Manual 

FEATURES • 1x USB socket, 2x rechargeable batteries • Disconnects when fully charged SAFETY INFORMATION This battery charging kit is for use with XBOX One. • Do NOT short circuit or burn • The battery charging kit is NOT a toy • Keep dry at all times. Do NOT immerse in liquids • For indoor use only • Do NOT attempt to disassemble. Unit does not contain serviceable parts • Avoid dropping, shaking or any hard impacts on the product • Do NOT attempt to plug foreign objects into the product • Before disconnecting, always switch the product off first EN TECHNICAL DATA • Includes 1x charging socket and 2x batteries • Light weight, easy to use and practical • Charge the battery by connecting the charging socket to your XBOX ONE console • Also compatible with PCs and other DC 5V power adapters all-guides com

provided. Insert the charging socket into one of the USB ports on your XBOX Console, PC or other DC 5V power adapter. 2. Once the battery has been charged, remove the battery compartment lid from the XBOX ONE controller and remove any inserted batteries. 3. Insert the fully charged battery pack into the battery compartment of the XBOX ONE controller and carefully press down the other end until the pack is inserted firmly. 4. Two controllers can be played and charged simultaneously with the battery packs provided. 0*120mm，单黑印刷 成品尺寸：90*120mm 2 1 3 4

product will be free from material defects and manufacturing flaws for a period of two (2) years from the original date of purchase. Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support). Within the context of this warranty, the consumer’s defective product will, at Technical Support’s option, be either repaired or replaced. Where authorized by applicable law, the full liability of Rubber Road Ltd and its subsidiaries (including for indirect damages) is limited to the repair or replacement of the Numskull product. The consumers legal rights with respect to legislation applicable to the sale of consumer goods are not affected by this warranty. This warranty shall not apply: (1) if the product has been modified, opened, altered or has suffered damages as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause not related to a material defect or manufacturing law; (2) in the event of failure to comply with the instructions provided by Technical Support; (3) to software not published by Rubber Road Ltd, said software being subject to a specific warrant provided by its publisher. Retain this information, colours and decorations may vary.

FONCTIONNALITÉS • 1x prise USB et 2 piles rechargeables • Déconnecte lorsqu’il est complètement chargé INFORMATION DE SÉCURITÉ Ce kit de chargement de batterie est à utiliser avec XBOX One. • NE PAS court-circuiter ou brûler • Le kit de chargement de la batterie ñ’est PAS un jouet • Garder au sec en tout temps. NE PAS immerger dans des liquides • Pour une utilisation en intérieur uniquement • N’essayez PAS de démonter. L’unité ne contient pas de pièces réparables • Évitez de laisser tomber, de secouer ou d’avoir des impacts durs sur le produit • N’essayez PAS de brancher objets étrangers dans le produit • Avant de déconnecter, éteignez toujours le produit en premier FR DONNÉES TECHNIQUES • Comprend 1 prise de charge et 2 piles • Léger, facile à utiliser et pratique • Chargez la batterie en connectant la prise de recharge à votre console XBOX ONE • Également compatible avec les PC et autres adaptateurs d’alimentation DC 5V

fournie. Insérez la prise de chargement dans l’un des ports USB de votre console XBOX, de votre PC ou de tout autre adaptateur d’alimentation CC 5V. 2. Une fois la batterie chargée, retirez le couvercle du compartiment des piles du contrôleur XBOX ONE et retirez les piles insérées. 3. Insérez la batterie complètement chargée dans le compartiment de la batterie du contrôleur XBOX ONE et appuyez doucement sur l’autre extrémité jusqu’à ce que le pack soit fermement inséré. 4. Deux contrôleurs peuvent être lus et chargés simultanément avec les batteries fournies. 0*120mm，单黑印刷 成品尺寸：90*120mm 2 1 3 4