Qomo QPC80H2 Manual 

Parts Identification ......................................................................................................... 2 Control Panel ................................................................................................................. 3 Remote Control .............................................................................................................. 4 Portable Visualizer ......................................................................................................... 5 Recommended Working Environment ........................................................................... 6 Insert and Remove Micro SD Card (not supplied) ........................................................ 7 USB Flash Drive (not supplied) ..................................................................................... 7 Connect Portable Visualizer to external equipment ....................................................... 8 Basic Operation ............................................................................................................ 13 Advanced Functions..................................................................................................... 15 Use the device as a camera .......................................................................................... 17 Storage ......................................................................................................................... 18 Problems and Solutions................................................................................................ 19 Specifications ............................................................................................................... 20

 Please unfold the device and adjust the camera head with one hand placing on the base and the other hand holding the case of camera head.  Please do not look directly to the LED lamp to prevent your eyes from being damaged.  When allocating the device, please hold the base with both hands. Do not carry the device by the gooseneck flexible tube or camera head with one hand.  Please prevent the camera head to hit the desk top or any other hard objects, or it can be damaged easily.  Please do not twist the gooseneck flexible tube.  Please be careful not to spill liquid on the control panel keys.  When the device is not in use for a while, please turn off the power.

Microphone Signal Indicator Control Panel Power Indicator Audio-OUT DC 12V Power Socket VGA-OUT Micro SD Card Slot Camera Head HDMI-OUT LED Lamp Light VIDEO-OUT USB-A for flash drive & USB mouse HDMI-IN Gooseneck RS232 VGA IN Anti-theft Slot Ventilation Hole

seconds to turn off. *Short press to enter sleep mode (Note: In sleep mode, camera and LED are off but HDMI pass-through function still works.) Mirror the current image Capture and save the current image / Up/Down, Increase/Decrease brightness Record video / Left/Right, Zoom out/Zoom in Enter/Exit Playback Mode Auto-focus or confirm Rotate Select the output signals Delete selected file from memory when in playback mode To show or hide OSD menu Freeze/Unfreeze the current image Turn on/off the LED lamp

seconds to turn off. *Short press to enter sleep mode (Note: In sleep mode, camera and LED are off but HDMI pass-through function still works.) Auto-focus or confirm Menu To show or hide OSD menu Freeze Freeze/Unfreeze the current image Snap Capture and save the current image Mirror Mirror the current image Record Record video Rotate Rotate Playback Enter/Exit playback mode Source Select the output signals / Up/Down, Increase/Decrease brightness Lamp Turn on/off the LED lamp / Left/Right, Zoom out/Zoom in Delete Delete selected file from memory when in playback mode

 Camera Head Please hold the camera head and adjust it to the position where you want to shoot the image.  Gooseneck Bend the gooseneck flexible tube gently by hand and place the camera head to the preferable height and orientation.  Support Stand Unfold the support stand of the base to prevent the device from failing backward.

Note: When the distance between object and camera is from 10 mm to 80 mm, please switch to Micro mode. If you do not select a working environment and placement according to the recommendation described above, please use the rotation ( ) key of the control panel or the remote control to adjust the orientation. Suggested minimum height from device in telescope mode: 250 mm Suggested minimum height from device in wide mode: 80 mm Object distance in Telescope mode: 250 mm~∞； Object distance in Wide mode: 80 mm~ ∞；

1. Insert the Micro SD card into the SD card slot on top of document camera. The images and files in internal memory can be copied to SD card or the capture image can be saved in the SD card. 2. The capture image will save to SD card instead of internal memory. 3. Push SD card lightly with your finger, the SD card can be removed. USB Flash Drive (not supplied) When USB flash drive plugs in USB Type-A successfully, the capture image and video can be saved in the flash drive. Note: When USB flash drive and micro SD card are both connected, USB flash drive storage priority is higher than SD card. SD Card

 System connection diagram Connecting the power cord Plug in the power adapter to the device DC 12V IN power socket first and then connect the AC power cord to a 100V~240V AC power source. Note: The plug type of AC cord varies depending on the countries and regions where you are in.

Type Device Interface Cable External Equipment Interface HDMI HDMI-OUT HDMI-IN HDMI-IN HDMI-OUT VGA VGA-OUT VGA-IN VIDEO VIDEO-OUT VIDEO-IN AUDIO AUDIO-OUT AUDIO-IN USB TYPE-B Port TYPE-A Port TYPE-A Port TYPE-B Port  RS232 control protocol RS232 Setting Baudrate 9600 bps Parity check no parity Stop bit one Data bit 8 bits

0 1 2 3 4 HEADER LENGTH CAT KEY END 0X48 0X02 0X14 0XXX 0X54 Command list FUNCTION HEADER LENGTH CAT KEY END UP 0x48 0x02 0X14 0x04 0x54 DOWN 0x48 0x02 0X14 0x05 0x54 LEFT 0x48 0x02 0X14 0x02 0x54 RIGHT 0x48 0x02 0X14 0x03 0x54 ENTER 0x48 0x02 0X14 0x06 0x54 POWERON 0x48 0x02 0X14 0x10 0x54 POWEROFF 0x48 0x02 0X14 0x11 0x54 SAVE 0x48 0x02 0X14 0x12 0x54 RECALL 0x48 0x02 0X14 0x13 0x54 LAMP 0x48 0x02 0X14 0x14 0x54 FREEZE 0x48 0x02 0X14 0x15 0x54 NEG 0x48 0x02 0X14 0x16 0x54 MIRROR 0x48 0x02 0X14 0x17 0x54 SPLIT 0x48 0x02 0X14 0x18 0x54 ROTATE 0x48 0x02 0X14 0x19 0x54 XGA 0x48 0x02 0X14 0x1A 0x54 B&W 0x48 0x02 0X14 0x1B 0x54 TITLE 0x48 0x02 0X14 0x1C 0x54 TEXT 0x48 0x02 0X14 0x1D 0x54 AUTO 0x48 0x02 0X14 0x22 0x54 NEAR 0x48 0x02 0X14 0x23 0x54 FAR 0x48 0x02 0X14 0x24 0x54 SOURCE 0x48 0x02 0X14 0x25 0x54 VOL_UP 0x48 0x02 0X14 0x28 0x54 VOL_DOWN 0x48 0x02 0X14 0x29 0x54 WB_RED_UP 0x48 0x02 0X14 0x2A 0x54 WB_RED_DOWN 0x48 0x02 0X14 0x2B 0x54 WB_BLUE_UP 0x48 0x02 0X14 0x2C 0x54 WB_BLUE_DOWN 0x48 0x02 0X14 0x2D 0x54 BRIGHT_UP 0x48 0x02 0X14 0x2E 0x54 BRIGHT_DOWN 0x48 0x02 0X14 0x2F 0x54 SCROLL_UP 0x48 0x02 0X14 0x30 0x54 SCROLL_DOWN 0x48 0x02 0X14 0x31 0x54

According to different resolution and image ratios, various display selections are listed below. Please refer to the table below to select the image output you prefer. Output Image ratio TV System Resolution HDMI 16:9 - 1280x720, 1280x800, 1920x1080, 16:10 1280x800, 1920x1200 4:3 - 1024x768, 1280x1024 VGA 16:9 - 1280x720, 1280x800, 1920x1080 16:10 1280x800, 1920x1200 4:3 - 1024x768, 1280x1024 Video - NTSC 720x480 - PAL 720x576  HD TV Connecting the HDMI output Use a HDMI cable to connect the HDMI output port of the device with the HDMI input port of TV or Projector.

Connecting the VGA output port Use a VGA cable to connect the VGA OUT port of the device with the VGA input port of TV or projector. Note: Use Source Button to switch between modes.  Using USB connection Press Menu > System Setting > USB to PC > PC Camera

) on the control panel or ( ) on the remote control. 2. Use ( / / / ) to make a selection and adjust the setting. 3. Press OK button ( ) to make the new setting activated. 4. Press the MENU ( ) button to hide the OSD menu. OSD MENU Name Icon Selection Functions Description Function Resolution XGA SXGA WXGA 720P 1080P 1280*800 1920*1200 Focus Mode Auto Focus Manual Focus Mask Activate the Mask function Highlight Line Activate the highlight line function MIC ON OFF Image Setting Photo Resolution 1280*720 1920*1080 2688*1522 Recording Resolution 1080P@30FPS 720P@30FPS VGA Video format AVI System Setting Language Support Chinese, English, Spanish, Russian, French, German and Italian. System Time / Time Setting User defined Display Information Set to display the information on top of the display or not. Beeper ON OFF

PC Camera Mass Storage File Manager Copy to a SD card Delete all Format SD card System Reset Ensure Ignore Upgrade Ensure Ignore NTSC/PAL NTSC PAL User Profile User 1 User 2 User 3 Effect Setting Mask Setting 10%, 20%, 30%, 40%, 50%, 60%, 70% and 80% Micro Mode ON OFF Mirror Normal Left-right Mode Up-down Mode Effect Normal Black-white Mode Negative Mode Flicker 50HZ/60HZ Brightness, Sharpness, DNR, Contrast, Saturation Use ( / ) to adjust its setting. Delay (Time-lapse) Photography ON/OFF ON OF Interval User defined Information Firmware version: xxx Hardware version: xxx Release Date: xxx Close Close the menu  Recording videos and capturing images 1. Please choose the focus mode according to the distance to object: Telescope mode

2. Use the Left/Right buttons ( / ) to adjust the image size. 3. Use the Auto Focus button to adjust the focus automatically. Use the Manual Focus button to adjust the focus manually. 4. Use the video button ( ) to begin recording a video. Press the button again to stop recording. 5. Use Snap button ( ) to capture an image. Note：You need insert SD card or USB drive first in order to take a video record.  Play 1. Use the Playback button ( ). The latest captured image or video will be displayed. 2. Use Left/Right buttons ( / ) to select the file to be displayed. 3. Press OK ( ) button. Advanced Functions  Mask function You can use the Mask function key to block the area that you do not wish to display; 1. Use the Menu ( ) button on the control panel or the remote control to show the

Note: Use the Menu ( ) >Effect Setting>Mask setting to set the size of Mask.  Highlight Line function You can use the Highlight Line function to mark those functions with a cross line. 1. Use the Menu ( ) button on the control panel or the remote control to show the menu. 2. Use the arrow buttons to make your selection: Menu>Function>Highlight Line.  Time-lapse photography You can produce the time-lapse video with video maker software. 1. Use the Menu ( ) button on the control panel or the remote control to show the menu. 2. Use the arrow buttons to make your selection: Menu>Delay Photography.  Transfer the captured image to computer Please note all recorded videos are in AVI format and saved under the file name format of xxxx.avi. Please turn on the power of the device first. 1. Use a USB cable to connect the device with a computer. 2. Use MENU ( ) > System Setting > USB to PC > Mass storage to detect SD card memory. Use the computer software to view images on the SD card or simply cut and paste the image to the computer. Note: When the control panel or the remote control is in operation, please do not unplug the USB cable to prevent the device from malfunction.

 Start the settings 1. Connect the device with the computer through USB Type-B: Turn on the power of your computer, and use the USB cable to connect the device with the USB port of your computer. Please confirm the USB is connected correctly. 2. Press Menu > System Setting > USB to PC > PC Camera 3. After connecting the device with your computer, when the computer detects the camera, the connection is therefore successfully established. You may use the installed software and start the camera functions (for example: Skype).  Connecting the microscope To connect the device with a microscope can display microscopic objects on a large screen. 1. Adjust the microscope and the objects to be focused. 2. Please select a proper microscope adapter. 3. First, install the microscope adapter on the lens of device. 4. Switch to Micro mode. Press Menu> Effect setting> Micro Mode ON. . 5. After the microscope adapter is installed on the camera head, connect the camera head with an ocular lens.  If the image on the presentation screen is blurry, please adjust the focus of the microscope.  Please use the Auto Focus button on the control panel or the Manual Focus button on the remote control to conduct the micro focus.

2. Please unplug and remove the power cord and all other cables from the device. 3. Please refer to the diagram to the right to fold the gooseneck flexible tube for storage.

Problem Possible causes Solutions The device does not turn on in normal condition. The power adapter is not connected correctly to the device or the power socket. Make sure the power adapter is connected correctly to the device and power socket. The device is unable to capture images or record videos. The device has insufficient memory. Remove some files and clear up the memory space of SD card/ USB flash drive or built-in memory. The SD card is protected. Reset the SD card to be writable. After the device is connected, there is no image output. The device is not connected to the external equipment correctly. Re-connect the device with the external equipment. The external equipment is not selected correctly. Select the correct external equipment. The resolution of the external equipment is set incorrectly. Reset the resolution of the external equipment. The device is not switched to the correct source of signals. Switch to the correct source of signals. The computer transfer key (VGA) is activated. Press the source of signal (CAM). HDMI is activated. Press the source of signal(CAM) The captured image is too blurry. The object to be photographed may be too close to the camera head. Use Auto Focus or Manual Focus to adjust the focus. If the distance for photographing is less than 20cm, please switch the focus mode to Micro mode. The image is upside down. The objects are not placed in the recommended working environment. Press the image Rotation key to adjust the display orientation. The image cannot be moved around. The image cannot be moved around because the Freeze function of the device is activated. Press again the Freeze function key on the control panel or the remote control to deactivate the function. The remote control does not respond. The battery runs out. Please replace with a new battery. Objects are located between the remote control and the device Please remove the objects that block the

signals. communication signals. The distance between the remote control and the device is too far. Please shorten the distance between the remote control and the device. Specifications Model QPC80H2 Image Sensor Omnivision 1/3" CMOS Lens 6 x optical zoom, 10 x digital zoom Shooting Area A3/A4 Video Resolution XGA(1024*768), XGA(1280*1024), WXGA(1366*768), 720P(1280*720), 1080P (1920*1080), 1280*800, 1920*1200 Total Pixels 5.0 Mega Frame Rate 1080p@30fps Input Connector HDMI 1.4 Compliant: (1) VGA: DB15FLC(1) Output Connector VGA: DB15FLC(1) C-Video: RCA(1) HDMI: (1) RS232(1) Microphone Build-in Speaker N/A DC POWER 12V/2A USB (UVC) Yes USB Mouse Yes USB Thumb Drive Yes USB Mass Storage Yes USB Camera Yes Digital Zoom Yes Video Merge N/A Audio Output Yes Memory Card Yes LED Lighting Yes LCD Preview N/A AWB/AF/AE Yes Image Effects B&W/Negative/Mirror/Freeze/Text/Split Remote Control Yes Rotate 90°/180°/270°