Modoo MHF-R220BT Installation Manual

Place the bottom pair of clips on the underside of your existing Rearview mirror. Lift the unit so that the bottom clips extend allowing the top clips to be fixed in position on top of your Rearview mirror and securely hold the handsfree unit in place. Adjust the fitted unit to your preference for clear rear vision. ②Select a suitable position for the microphone depending on your vehicle type, this should be placed close to the users head - the driver’s sun visor is normally adequate. “It is highly recommended to have the front of the microphone (side with more holes) directly facing the operator for the best voice pickup.” The microphone can be placed either back or front of the visor by detaching, rotating and re-attaching microphone holder to correct side of the microphone. ③Clip a microphone on the driver’s sun visor recommended to keep a distance of the microphone from the MHF-R220BT unit as long as possible. ④Insert the power jack of the power adapter cable (4M). ⑤Connect the Power Adapter Cable into its respective socket on the MHF-R220BT unit. ⑥The power lead should be secured and hidden into the vehicles interior using the seals or joins around the windscreen and door “A-Frame” and under your dashboard. Ensure that you leave yourself enough cable to be able to connect to your cigarette lighter socket. Note : Please ensure that the microphone and power cable do not interfere with the safe operation of your vehicle. Installation guide 6 7 Power On : It appears start on the mirror. Voice : “Power On” 2. You will hear a beep tone. The HandsFree unit is now ready to be paired for the first time. It appears Pairing HF on the mirror. 3. For the next procedure, Go to the next page to follow the instruction of ; The MHF-R220BT supports both HandsFree and Headset Profiles. The default profile is HandsFree. Follow the pairing instructions for the first use, after that the unit will pair automatically. 1. When the power is on, press the “VOL ▲” button for 3 seconds. Pairing your Bluetooth cellular phone with the MHF-R220BT Pairing in “HandsFree” mode 2. You will hear a second beep tone, which shows the unit is ready to be paired for the first time. It appears Pairing HS on the mirror. The “Headset” mode does not support ‘Caller ID’, ‘Voice Dialling’ and ‘Reject Call’ 1. After the above 1~2, then press the “VOL ▲” button for 3 seconds again. Pairing in “Headset” mode Go to Cellular phone pairing mode (Next page) 3. For the next procedure, Go to the next page to follow the instruction of ; Go to Cellular phone pairing mode (Next page)

connectivity and / or Bluetooth connection section. 2. Select the “search for” a new HandsFree device function and allow the phone to find the ModooFree BT (MHF-R220BT). Note : Each cellular phone type has distinct phone menu so you may need to refer to your manufacture’s instructions for the correct procedure on how to “connect a new Bluetooth device”. 3. The Bluetooth code for the MHF-R220BT should appear on your cellular phone screen. 4. Press the “connect” with the HandsFree option on your cellular phone. Note : Please return to the pairing instructions if the Bluetooth code does not appear on the cellular phone screen. The green LED light should flash during pairing. 5. The cellular phone should prompt for a pin code. Insert the MHF-R220BT pin code : 6. The cellular phone should confirm that it has established a new paired connection. 7. Close the menu. The pairing is now completed. Note : The green LED light illuminates after successful pairing. Please adjust the volume to your preference by using the volume keys. Cellular phone pairing mode No Bluetooth connection : No Phone on the mirror. ●ModooFree BT(MHF-R220BT) can be stored up to 4 different phones. ●The earliest phone number will be removed when the memory is full. ●The Pairing Priority will be given to the last paired cellular phone. ●If you want to change the pairing priority, try to connect ModooFree BT from the cellular phone. Pairing can be stored up to 4 cellular phones. It appears Paired on the Mirror. 1 2 3 4 Voice : “Connected” 䧇Press “SEND” button in order to reactive Bluetooth pairing link. Send call : Calling on the mirror. MUTE : Secret on the mirror. NOTE : Once the Bluetooth pairing is completed between your cellular phone and MHF-R220BT, the both units will be automatically recognized on its pairing whenever turn on the key in your car. Useful Tips for Bluetooth Connection 1. Should your cellphone battery be at low charge, the Bluetooth connection may occasionally be lost. To maintain good connectivity ensure that your phone battery is adequately charged. 2. In case of failure of Bluetooth pairing 1) Delete item in paired list on your Bluetooth phone 2) Reset both phone and handsfree by switching off /on 3) Reset pairing as per procedure 3. Connection not established after pairing 䧇Manually connect from the paired phone i.e. My paired devices 䧫MHF-R220BT 䧫Connect 4. How to establish re-connection after pairing 䧇Press "SEND" button briefly 䧇Press and hold "END" button for 5 seconds The handsfree unit will re-connect automatically thereafter. 8 9

to the second call. It appears Redial on the mirror. Note : This function only works if you have a call waiting option with your carrier and also another call is actually waiting to be answered. Call waiting Press “SEND” button It appears Redial on the mirror. Note : This function only works if phone has “last number redial” feature. Last number dialling during idle Press and hold “SEND” button (for 2 seconds) It appears Voice Dial on the mirror. Announce name after a beep. Note : Voice dialling is possible only if your cellular phone has a voice dialling capability. Each cellular phone type has distinct phone menu so you may need to refer to your manufacture’s instructions. Voice dialling during idle The audio transfer function is for switching the call from the HandsFree unit to the cellular phone for a private conversation without disconnecting the call. Switching from HandsFree to cellular phone : Press and hold “END” button (for 3 seconds) Switching back to HandsFree : Press and hold “END” button (for 3 seconds) It appears Call Trans on the mirror. Audio transfer 10 11 To accept call press “SEND” button It appears Accept Call on the mirror. When the handsfree is ringing with incoming call To reject call press “END” button It appears Drop Call on the mirror. To change handsfree ring tone ( 3 Ring Sound Options + 1 Voice ) press and hold “VOL ▼” button for 5 seconds. Display will show Elod 1, 2, 3. or O. Set to your chosen option by repeating same procedure. ※ No voice announcement from the handsfree 䧇Set cellular phone profile to Vibration / Silent mode. To end call press “END” button It appears Drop Call on the mirror. During conversation To control volume press “VOL ▲” / “VOL ▼” button It appears Vol Up or Vol Dn(down) on the mirror. Using the MHF-R220BT as a HandsFree Device

There is a chance the power cable plug is not correctly seated in the cigar/utility jack socket for proper connection. Remove and reinsert to ensure good fitting and connection. Problem during pairing? Repeat pairing process according to the pairing section Still experiencing problem? Turn off the cellular phone and separate the battery from the cellular phone for approximately five seconds (In some instances, this action clears up any potential bugs built up in the cellular phone software that can hinder proper pairing.) Repeat pairing process as per previous pairing instructions. Too loud? Adjust the volume to your preferred sound level by pressing the relevant volume switch. Each type of Bluetooth cellular phone has different function buttons, though highly unusual, it may be possible that the functions operate differently with your specific phone model. Callers are complaining about hearing noise? Check that the microphone is secured firmly in place and is not creating vibration and noise. Also check and adjust microphone accordingly to ensure that it is facing towards to the user’s face. Troubleshooting - Do not expose this unit under humid environment. - Do not drop this unit. - Do not disassemble this unit. - Do not press two buttons at once. This action may cause a sudden Bluetooth disconnection. - Do not clean the unit with any chemical or water. - Keep this unit away from fire and dust. - For safety reasons, please keep your phone conversation short, do not make any notes or read documents. It is highly recommended to park the vehicle in the safe place before continuing the conversation. Using a cellular phone while driving can potentially create a distraction for the driver which may increase the likelihood of an accident. - Please adjust direction of the mirror to ensure good rearview vision for safe driving Safety precautions 12 13 HandsFree Call (Send Call) in the Car Press phone number on the cellular phone, and press “SEND” button of HandsFree. Note : If there is no sound on the loudspeaker of HandsFree unit, press and hold “END” button for 3 seconds. Then, it will switch from Cellular Phone to HandsFree. Private conversation option: The operator can plug an earphone (not included) in to the earphone jack of the MHF-R220BT for a private conversation. Note : For your own safety, it is highly recommended that the vehicle is parked in the safe place when plugging in the earphone. Re-activation of Bluetooth Link after Pairing 䧇Press “SEND” button. ( If Bluetooth Link LED is turned off, press “SEND” button in order to reactivate the Bluetooth pairing link ) Please note ; It is possible that the MHF-R220BT buttons might not operated as per this operation guide if your Bluetooth phone has an unusual Bluetooth program. In this case, please reset both MHF-R220BT and cellular phone. Specification Input power Normal Current Maximum Current Fuse Speaker Microphone Noise Suppression Echo Suppression Operating temperature range Supported Profiles Power Class Carrier Frequency Built in Flash memory Compatibility Full duplex operation with noise & echo suppression Bluetooth specification: v1.2 compliant 10 ~ 16V DC > 50mA > 500mA 250V / 2A Max. 2W Directional microphone -52dB Up to 18dB Up to 42dB - 30°C ~ + 80°C Handsfree Profile, Headset Profile 2dBm Max (Class 2) 2400MHz ~ 2483.5MHz 8M bit This unit is compatible with most Bluetooth equipped cellular phones including Motorola, Sony Ericsson and Nokia, Samsung, LG, Etc. (Most Bluetooth enabled phones)

(1) year after the date of purchase (the “Warranty Period”) of any SungJin Techwin Co., Ltd. Product by Purchaser, the product will substantially conform to SungJin Techwin Co., Ltd. published specifications for the product on the date of purchaser’s purchase of the product, subject to the terms herein. Purchaser shall notify SungJin Techwin Co., Ltd. of any non-conformance during the warranty period and obtain a written return material authorization (“RMA”) from SungJin Techwin Co., Ltd. for the nonconforming product and return the nonconforming product to SungJin Techwin Co., Ltd., freight prepaid with a statement describing the nonconformity. SungJin Techwin Co., Ltd. exclusive obligation with respect to nonconforming product shall be, at SungJin Techwin Co., Ltd.’s option and expense, to repair or replace such returned item. The foregoing is purchaser’s sole and exclusive remedy for breach of warranty by SungJin Techwin Co., Ltd.’s with respect to the product. The warranty set forth above shall not apply to any product, which has not been properly used or handled in accordance with the instructions supplied by SungJin Techwin Co., Ltd. In addition, SungJin Techwin Co., Ltd.’s warranty is void if the product has been repaired, altered, damaged by the faulty installation, misuse, abuse, or which the product defect is attributable to any failure or damage which is beyond the reasonable control of SungJin Techwin Co., Ltd. This warranty applies only to new SungJin Techwin Co., Ltd. products purchased from authorized retail sellers only. The foregoing warranties are the sole warranties, express or implied, given by SungJin Techwin Co., Ltd. in connection with the product, and SungJin Techwin Co., Ltd. disclaims all other warranties, including warranties of merchantability, fitness for a particular purpose and no infringement of third party rights. SungJin Techwin Co., Ltd. shall not be liable for any special, incidental or consequential damages in connection with the product, even if SungJin Techwin Co., Ltd. has been advised of the possibility of such damages. The liability of SungJin Techwin Co., Ltd. hereunder for all claims shall not exceed the amount paid by purchaser to SungJin Techwin Co., Ltd. for the product sold rise to SungJin Techwin Co., Ltd.’s liability. Warranty