ATCOM AX-1600P Product Manual

Figure: AX-1600P Figure: AXE-1600P ATCOM ATCOM ATCOM ATCOM®®®® Analog Analog Analog Analog Card Card Card Card AX- AX- AX- AX-1600P/ 1600P/ 1600P/ 1600P/AX AX AX AXEEEE-1600P -1600P -1600P -1600P Product Product Product Product Guide Guide Guide Guide Version: 1.1 2012-07-07

with Centos 6.0 Content CCCCONTACT ONTACT ONTACT ONTACT ATCOM ATCOM ATCOM ATCOM...................................................................................................................................... ...................................................................................................................................... ...................................................................................................................................... ......................................................................................................................................2222 CCCCHAPTER HAPTER HAPTER HAPTER 1111 THE THE THE THE INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION OF OF OF OF AX-1600P/AXE1600P AX-1600P/AXE1600P AX-1600P/AXE1600P AX-1600P/AXE1600P...................................................................... ...................................................................... ...................................................................... ......................................................................3333 CCCCHAPTER HAPTER HAPTER HAPTER 2222 HARDWARE HARDWARE HARDWARE HARDWARE INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION................................................................................................. ................................................................................................. ................................................................................................. .................................................................................................4444 CCCCHAPTER HAPTER HAPTER HAPTER 3333 SOFTWARE SOFTWARE SOFTWARE SOFTWARE INSTALLATION INSTALLATION INSTALLATION INSTALLATION..................................................................................................... ..................................................................................................... ..................................................................................................... .....................................................................................................6666 CCCCHAPTER HAPTER HAPTER HAPTER 4444 SOFTWARE SOFTWARE SOFTWARE SOFTWARE CONFIGURATION CONFIGURATION CONFIGURATION CONFIGURATION................................................................................................ ................................................................................................ ................................................................................................ ................................................................................................8888 CCCCHAPTER HAPTER HAPTER HAPTER 5555 REFERENCE REFERENCE REFERENCE REFERENCE.......................................................................................................................... .......................................................................................................................... .......................................................................................................................... .......................................................................................................................... 11 11 11 11

Founded in 1998, ATCOM technology has been always endeavoring in the R&D and manufacturing of the internet communication terminals. The product line of ATCOM includes IP Phone, USB Phone, IP PBX, VoIP gateway and Asterisk Card. Contact sales: Address District C, east of 2nd floor, #3, Crown industry buildings, Chegongmiao Industry area, Futian district, Shenzhen, China Tel +(86)755-23487618 Fax +(86)755-23485319 E-mail [email protected] Contact Technical Support: Tel +(86)755-23481119 E-mail [email protected] Website address: http://www.atcom.cn/ ATCOM Wiki Website: http://www.openippbx.org/index.php?title=Main_Page Download Center: http://www.atcom.cn/download.html

the the the Introduction Introduction Introduction Introduction of ofof of AX-1600P/ AX-1600P/ AX-1600P/ AX-1600P/AXE1600P AXE1600P AXE1600P AXE1600P Overview Overview Overview Overview of ofof of the the the the AX-1600P/ AX-1600P/ AX-1600P/ AX-1600P/AXE1600P AXE1600P AXE1600P AXE1600P AX1600P/AXE1600P Asterisk card is the telephony PCI/PCI-E card that supports up to sixteen FXO and FXS ports. Using AX1600P analog card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution which include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX. The FXO and FXS modules are interchangeable to suit various requirements. Features Features Features Features Analog card for Asterisk PBX Support Asterisk PBX, zaptel and dahdi driver Support up to 16 FXO/FXS analog port Suitable for SOHO PBX / VoiceMail / IVR. Caller ID and Call waiting Caller ID Conference Applications Applications Applications Applications IP PBX IVR system Traditional Calls/VoIP Calls Conference Hardware Hardware Hardware Hardware requiremen requiremen requiremen requirementttt 500-Mhz Pentium III 64MB RAM 3.3V or 5V PCI 2.2 slot PCI PCI PCI PCI card card card card dimension: dimension: dimension: dimension: 264mm (length) × 121mm (height)

Hardware Hardware Hardware Introduction Introduction Introduction Introduction Hardware Hardware Hardware Hardware Configuration Configuration Configuration Configuration Motherboard: AX-1600P Dual ports FXS module: AX-210S Dual ports FXO module: AX-210X One FXS port and one FXO port module: AX-210XS Splitter: SP400 Customers can use the combination of AX-210S, AX-210X, AX-210XS modules according to their requirements. One AX-210S module supports two FXS ports, one AX-210X module supports two FXO ports, One AX-210XS module supports one FXS port and one FXO port. AAAAttention ttention ttention ttention: If you want to use FXS port with AX1600P, you have to provide 12V power for the card. If you want to use any module with AXE1600P, you have to provide 12V power for the card. Please download the dahdi-linux for the card in atcom website. W W W Warning arning arning arning: Please do not plug and unplug the card and modules when the PC power is on. Figure 1: AX-1600P Power Feeding Connection

Software Software Software Installation Installation Installation Installation Test Environment: asterisk-1.6.2.6 dahdi-linux-complete-2.4.1.2+2.4.1 Centos 6.0 AX-1600P+8AX-210X After inserting the card into your PCI slot and boot your server, please use the “lspci -vv” command to check the PCI bus compatibility. The correct output will like the following: ---------------------------------------------------------------------------------------------------------------------- 05:04.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface ---------------------------------------------------------------------------------------------------------------------- A Tiger Jet device will be found, if you can not see the Tiger Jet device, please poweroff your server and try another PCI slot, if it still does not help, you have to check the compatibility issue between the card and your PCI bus. 1. To install asterisk and dahdi, we have to install the following prerequisite packages: bison bison-devel zlib zlib-devel openssl openssl-devel gnutls-devel gcc gcc-c++ Please use the yum install command to install the above packages. 2. Download asterisk,dahdi-linux-complete [root@localhost src]# wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-xx [root@localhost src]# wget http://www.atcom.cn/cn/download/cards/ax800p/dahdi-linux-complete-2.4.1.2+2.4.1-3.0.tar.g z 3. Install asterisk,dahdi-linux-complete Install dahdi-linux-complete 1) [root@localhost src]# tar -zxvf dahdi-linux-complete-2.4.1.2+2.4.1-3.0.tar.gz 2) [root@localhost src]# cd dahdi-linux-complete-xxx+xxx 3) [root@localhost dahdi-linux-complete-xxx+xxx]# make 4) [root@localhost dahdi-linux-complete-xxx+xxx]# make install 5) [root@localhost dahdi-linux-complete-xxx+xxx]# make config

2) [root@localhost src]# cd asterisk-xxx 3) [root@localhost asterisk-xxx]# ./configure 4) [root@localhost asterisk-xxx]# make 5) [root@localhost asterisk-xxx]# make install 6) [root@localhost asterisk-xxx]# make samples

Software Software Software Configuration Configuration Configuration Configuration 1. Please check if the AX-1600P driver has been loaded successfully, run cat /proc/interrupts command and you should see one line with "ax1600p". If you can not see "ax1600p", you can try to poweroff your server and replug AX-1600P into another PCI slot. 2. Please use the “dahdi_genconf” command to configure the /etc/dahdi/system.conf file and generate /etc/asterisk/dahdi-channels.conf file. [root@localhost ~]# dahdi_genconf It does not show any output if dahdi_genconf run successfully. system.conf ---------------------------------------------------------------------------------------------------------------- # Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER) fxsks=1 echocanceller=mg2,1 fxsks=2 echocanceller=mg2,2 ............ ............ ............ ............ fxsks=15 echocanceller=mg2,15 fxsks=16 echocanceller=mg2,16 # Global data loadzone = us (According to your country) defaultzone = us (According to your country) ----------------------------------------------------------------------------------------------------------------

;;; line="1 WCTDM/16/0 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default ;;; line="2 WCTDM/16/1 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 2 callerid= group= context=default ............ ............ ............ ............ ;;; line="15 WCTDM/16/14 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 15 callerid= group= context=default ;;; line="16 WCTDM/16/15 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 16 callerid= group= context=default

The right output of running dahdi_cfg –vv will like the following: DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0.2 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) ............ ............ ............ ............ Channel 15: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 15) Channel 16: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 16) 16 channels to configure. Setting echocan for channel 1 to mg2 Setting echocan for channel 2 to mg2 ............ ............ ............ ............ Setting echocan for channel 15 to mg2 Setting echocan for channel 16 to mg2 3. Please add the following line in the end of chan_dahdi.conf file #include dahdi-channels.conf 4. Please run asterisk with the following command: asterisk –vvgc reload 5. Please run dahdi show channels command The right output should like the following: Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service 1 from-pstn default In Service 2 from-pstn default In Service ............ ............ ............ ............ 15 from-pstn default In Service 16 from-pstn default In Service

Reference Reference Reference http://www.asteriskguru.com/ http://www.asterisk.org/downloads http://www.openippbx.org/index.php?title=Main_Page http://www.atcom.cn/