Mobeye CM2500 Operation & User’s Manual

during 1 second or longer, the module establishes GSM network connection. This could take approximately 15-20 seconds, depending on the local network strength. In order to shorten this time, the Mobeye Panic Button could be powered externally. The integrated GSM module will always be open and having network connection. The panic alarm will reach the contact persons faster. ...

3.1 USING AN EXTERNAL EMERGENCY BUTTON It is possible to connect external emergency buttons to the inputs. As soon as the button is pressed during at least one second, the Mobeye Panic Button reacts similar as after pressing the on/off button; it sends an SMS text message to the preset numbers and calls these numbers. Insert the 2 wires of an external button through the hole of the enclosure to the inside part and next in the two connectors of input 1 (press on the green pins for connecting the wires). It does not matter which wire ...

850/900/1800/1900 Mhz Antenna : 900/1800/1900 Mhz Batteries : 2* CR123 (lithium) Battery life in normal mode : >1 year Ext. power connection : 12 VDC (+/- 2 VDC) / min. 500 mA. (optional) Power consumption low power : ca 50 μA. stand-by / max. ca. 500 mA Power consumption 12V : ca 50 mA. stand-by / max. ca. 500 mA Dimensions : 80 x 60 x 40 mm Ambient temperature : -10 °C until +50 °C This manual is published by Mobeye®. All rights, the translation included are reserved. Any reproduction, either photocopy, microfi ...

SMS command delete 1st telephone number: DEL1 .... similar for DEL2...DEL5 In case a foreign number needs to be entered start with 00 follow by the country code (e.g. 0031612345678). 4.4.2 Identification text It is possible to add a standard identification text (NAME) to all messages sent out by the Mobeye Panic Button. The alarm messages are a combination of the name and the alarm text. A user defined identification has a length of maximum 20 characters. The default identification text is ‘Mobeye’. SMS command identification text: NAME: