Osaki OS-Aster Operation Instructions Manual

Smart Class Operation Instructions MASSAGE CHAIR ※Products refer to the actual product, without prior notice. ster

carefully in order to know how to use this product correctly before operation. Please pay more attention to the important safety warnings and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product. CONTENTS Important Safety Warning Instructions de securite importantes Safety and maintenance Safety warning Name and function of components Function Method of usage Product specification

always be followed, including the following: Read all instructions before using (this appliance) DANGER-To reduce the risk of electric shock: 1) Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING-To reduce the risk of burns, fire, electric shock, or injury to Persons: 1) An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2) Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 3) Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons. 4) Use the appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 5) Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair. 6) Do not carry this appliance by supply cord or use cord as a handle. 7) Keep the cord away from heated surfaces. 8) Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. 9) Never drop or insert any object into any opening. 10) Do not use outdoors. 11) Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 12) To disconnect, turn all controls to the off position, then remove plug from outlet. 13) The appliance is intended for household and indoor use only. 14) Connect this appliance to a properly grounded outlet only ,see grounding instructions . Safety and maintenance Important safety instructions 15) Keep children away from extended foot support (or other similar parts ) 16) Do not use massager in close proximity to loose clothing or jewelry. 17) Keep long hair away from massager while in use. 18) Connect this appliance to a properly grounded outlet only. See Grounding Instructions SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This product must be grounded, if it should malfunction or breakdown. Grounding provides a path of least resistance for electric current. To reduce the risk of electric shock, this product has a cord equipped with a grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER: Improper connection of the equipment grounding conductor can result in a risk of electric shock, check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded, do not modify the plug provided with the product- If it will not fit the outlet, have a proper outlet installed by a qualified electrician 1)This product is for use on nominal 120-volt circuit,and has a grounding plug that looks like the plug illustrated in sketch on the page 16. A temporary adapter that looks like the adapter illustrated in sketches B and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B. If a properly grounded outlet is not available the temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The rigid green ear, which protrudes from the adapter, must be connected to a permanent earth like an outlet box cover grounding. Whenever the adapter is used, it must be held in place by a metal screw.

Securite et entretien lors de l'utilisation d'un appareil électrique, des précautions de bases doivent être respectées, y compris ce qui suit : Lisez toutes les instructions avant d'utiliser l'appareil. DANGER- Pour réduire le risque de choc électrique: 1) Toujours débrancher cet appareil de la prise électrique immédiatement après usage et avant nettoyage AVERTISSEMENT- Pour réduire le risque de brûlures, d'incendie, de choc électrique ou de blessures: 1) Cet appareil ne doit jamais quittervotre surveillance lorsqu'il est branché. Débranchez le de la prise lorsqu'il estinutilisé, et avant de placer ou d'enlever des pièces. 2) Ne pas utiliser cet appareil sous une couverture ou un oreiller. Une chaleur excessive peut provoquer un incendie, un choc électrique ou des blessures corporelles. 3) Soyez prudent et maintenez une surveillance accrue lorsque cet appareil est utilisé par, sur, ou près des enfants, de personnes invalides ou handicapées. 4) Utilisezl'appareil uniquement pour un usage habituel, comme décrit dans ce manuel. Ne pas utiliser d'accessoires non recommandés par le fabricant. 5) Ne jamais faire fonctionner cet appareil si le cordon ou la fiche sont endommagés, s'il ne fonctionne pas correctement, s'il est endommagé ou s'il est tombé dans l'eau. Retournez l'appareil auservice technique pour examen et réparation. 6) Ne transportez pas cet appareil par le cordon d'alimentation ou d'utilisation comme une poignée. 7) Gardez le cordon loin des surfaces chauffées. 8) Ne jamais faire fonctionner l'appareil en obstruant les ouvertures d'air. Gardez les ouvertures à l'air, libre de peluches, de cheveux, etc. 9) Ne jamais laisser tomber, ou insérer d'objet dans les ouvertures. 10) Ne pas utiliser à l'extérieur. 11) Ne pas utiliser dans les lieux où des aérosols (vaporisateurs) sont utilisés, ni là où l'oxygène est administré. 12) Pour débrancher, mettre tous les boutons de l'appareil sur la position arrêt, puis retirer la fiche de la prise. 13) L'appareil est destiné à un usage domestique et à l'intérieur seulement. 14) Connectez cet appareil à une prise correctement reliée à la terre. Voir les instructions de mise à la terre. 15) Éloignez les enfants du support de pied ouvert (ou des autres pièces semblables). 16) Ne pas utiliser de massage à proximité des vêtements amples ou des bijoux. 17) Garder les cheveux longs à l'écart de masseur en cours d'utilisation. 18) Raccordez cet appareil à une prise correctement mise à la terre. 19) Ne pas utiliser l'appareil de massage à proximité des vêtements amples ou des bijoux. 20) Gardez les cheveux longs loin du masseur pendant l'utilisation. Ce produit doit être relié à la terre. Si il dysfonctionne ou tombe en panne, la terrefournit un chemin de moindre résistance pour le courant électrique afin de réduire le risque de choc électrique. Cet appareil est équipé d'un cordon avec un conducteur de mise à la terre des équipements et une prise de terre. La fiche doit être branchée dans une prise appropriée qui est correctement installée et mise à la terre conformément à la règlementation locale. DANGER: un mauvais branchement de l'équipement à la prise de terre, peut entraîner un risque de choc électrique. Consultez un électricien qualifié si vous avez des doutes quant à savoir si le produit est correctement mis à la terre. Ne pas modifier la fiche fournie avec le produit si elle ne rentre pas dans la prise. Adressez vous à un électricien qualifié le cas échéant. 1)Ce produit est destiné à être utilisé sur un circuit de 120 volts, et possède une fiche de mise à la terre semblable à la fiche illustrée sur le croquis de la page 16. Un adaptateur temporaire qui ressemble à l'adaptateur illustré sur le croquis B et C peut être utilisé pour brancher cette fiche à un réceptacle 2-pole, comme indiqué sur le croquis B. Si une prise de terre n'est pas disponible, l'adaptateur temporaire ne doit être utilisé que jusqu'à une prise de terre correcte (croquis A) pour être installé par un électricien qualifié. L'oreille rigide de couleur verte, qui dépasse de l'adaptateur, doit être connectée à une terre permanente comme un couvercle de boîte de sortie mise à la terre. Chaque fois que l'adaptateur est utilisé, il doit être maintenu en place par une vis en métal. S'il vous plaît noter que lorsque ne pas coincer votre détection des doigts Avant le nettoyage ou la réparation doivent couper l'alimentation CONSERVER CES INSTRUCTIONS INSTRUCTIONS DE BASES

·Please do not allow children to touch move-able parts of this product. ·Please use a well-grounded power supply suited for this product. ·Please pull out the plug after use or before cleaning to avoid injury or damage to the product. ·Please operate this product according to this manual instructions. ·Do not use accessories which are not recommended. ·Do not use this product outdoors. ·Please read this manual instruction carefully before operation. ·Any other usage that is not listed in this manual instruction is forbidden. ·20 minutes of usage each time is recommended. ·Please don’t use product if the leather is broken or damaged. ·Please don’t use product if the cover or leather is damaged. ·Please don’t use product if the radiator hole is covered or blocked. ·Please don’t drop anything into this product. ·Please don’t fall asleep while using this product. ·Please don’t use product if under the influence or feeling unwell. ·Please don’t use product within one hour after having meal. ·Please don’t make the massage function too strong for avoiding Injury. ·Environment for usage. ·Please do not use the product in high temperature settings and moist environments such as the bathroom. ·Please do not use in places where the environmental temperature changes sharply. ·Please don’t use it under heavy-dusted or caustic environment. ·Please don’t use it where there is not enough space or good ventilation. ·People who are not suitable to use this product. ·People who are suffering from osteoporosis are not suitable to use this product. ·People who are suffering from heart disease or carrying electronic medical equipment such as heart pacemaker are not suitable to use this product. ·People who are suffering from fever are not suitable to use this product. ·Pregnant women or women that are on their menstrual cycle are not suitable to use this product. ·People who are injured or with skin disease are not suitable to use this product. ·Children under 14-years old or people mentally disabled are not allowed to use this machine without being supervised. ·People who are told by doctor to have rest or people who feel unwell are not suitable to use this product. ·People whose bodies are wet are forbidden to use this product. ·Safety. ·Check the voltage to see if it is suitable to the specification of this product. ·Don’t use wet hand/s to pull the plug. ·Don’t make water go inside this product to avoid electric shock or cause damage to this product. ·Don’t damage the wires or change the circuit of this product. ·Don’t use wet cloth to clean the electric parts such as the switch and plug. ·Be away from this product under the power cut state to avoid injury if the power comes back suddenly. ·Stop using this product while it's behavior is abnormal, and please consult local agent immediately. ·Stop using this product if you feel unwell, and please consult a health care doctor. ·This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ·Children should be supervised to ensure that they do not play with the appliance. ·If the supply cord is damaged, it must be replaced by the manufacturer, its Service agent or similarly qualified persons in order to avoid a hazard. 5. Maintenance. ·This product should be maintained by certain appointed agents, users are prohibited to disassemble or maintain by themselves. ·Please don’t forget to turn off the power after usage. ·Don’t use this product if the socket is loose. ·If this product will be left unused for long, please curl up the wires and reserve this product in a dry and dustless environment. ·Do not reserve this product under high temperatures or near fire and avoid longtime direct sunshine. ·If the detachable cord / supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. ·Please clean this product with a dry cloth. Don’t use a thinner, benzene, or alcohol. ·The mechanical components of this product are specially designed and made, it is not necessary to be specially maintained. ·Don’t use edged item to thrust this product. ·Don’t roll or pull this product above uneven ground, it should be lifted before moving. ·Please use it intermittently; don’t make this product work continuously for long. 6. Solution of ordinary malfunctions. ·It is natural if the motor sounds while in usage. ·If the controller can’t work normally, please check the plug and socket if they are connected strongly and make sure the switch is turned on. ·If the rated working time is over, the product will automatically activate the power- off button. If this product works continuously for long, the temperature protector will make the product automatically power-off, it should be used again after half an hour's rest. Safety and Maintenance Safety and Maintenance

avoid the massage chair falling forward to damage the product or cause personal injuries. Prohibit pressing Before sitting on the massage chair, make sure that the massage hand stays in the seat cushion position to avoid discomfort to the buttocks when the body is pressing down and at risk to causing damage to the massage hands. Do not strive to pull out the control cable or power cord during the standby or power-on state to avoid product damage or electrocution accidents. It is advised that you unplug the controller cable and power cord and put them out of reach from anyone including children, adults, and pets after you use the chair. When starting the zero gravity lying function, be sure to check whether there are children and pets under the bottom of the footrest and backrest. If not this may cause the product damage or personal injuries.

Function 1. Head cushion 2. Upper arm air pressure component 3. Arm air pressure component 4. Remote controller and mobile phone holder 5. Seat cushion 6. Leg rest frame 7. Foot rest frame 8. Calf retaining plate 9. Back cushion 10. Armrest decoration 11. Armrest 12. Side cover 13. Back cover 14. Controller 15. PCB box cover 16. Caster 17. Power cord and plug 18. Fuse box 19. Hand controller cable socket 20. Power switch 21. Power cord socket ·Designed with a set of vertically movable, four wheel driven muted intelligent massage hands. ·There are five kinds of simulated massage techniques: shiatsu, kneading, tapping, knocking, kneading and tapping. ·Set with six kinds of characterized auto massage function: comfort, ease, full body, neck& shoulder, back & waist massage, stretch. ·It has the upper body manual massage function (area, fixed point, full back, neck shoulder, back waist, five massage parts selection, each massage technique speed can be adjusted in three steps. In the fixed point and partial module state, the massage ball can move up and down to adjust the massage point accurately. In the state of tapping, shiatsu and knocking massage, the width between the two kneading balls is adjustable with three levels: wide, medium and narrow.. ·Air pressure massage function with three modes: Full body air pressure, arms air pressure, leg air pressure, with 3 intensity adjustable. ·With sole roller massage function ·The footrest can be extended to suit different leg lengths. ·The motor drives the footrest and the backrest synchronically and lay down automatically two regulatory functions. ·The backrest of the massage chair should be kept at least 275 mm away from the wall. ·Natural magnet is placed at the heel of the heel. ·The SL-type backrest track fits the human body curve, and the backrest is in a zero-gravity state when lying down. ·The chair will be reset when switch is turned off. The massage hands will be restore as well.

Method of usage Note: The specific displays refer to the actual object of this product! 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1.LCD display: ·Display all massage functions 2.Power switch: ·Turn on or Turn off all massage functions. 3.Pause button: ·Stop or start all massage functions. 4.Timing button ·Time setting 5.Auto lying Button ·There are three automatic lying position, choose your favorite one. 6.Auto massage Button ·Please refer to page 10 of this manual for details. 7.Air pressure mode Button ·Turn on/off the air pressure massage function (refer to page 11 of this manual for details). 8.Manual massage button ·Please refer to page 10 of this manual for details. 9.Sole roller button ·Turn on/off sole roller massage function 10.Shoulder adjust button ·Make adjustments on shoulder acupressure points. 11.Lifting button ·Rise up the backrest and lower down the footrest. 12.Lying button ·Lower down the backrest and raise up the footrest. 13.Air pressure intensity button ·Make adjustments on the air pressure intensity. 14. Roller intensity button ·Make adjustments on the sole roller intensity. Timing

Method of usage ·Features automatics massage ·Upper body manual massage H0 H1 H2 H3 H4 F1 Auto F2 Auto F3 Auto F4 Auto F5 Auto F6 Auto Function Button Description Display Features automatics massage Comfort Relax Full body Neck & shoulder Back&waist Stretch Loosen the muscles. Deep-tissue massage throughout key acupressure points to relax the sore area. Full body massage, relaxing the sore areas. Focused on the neck and shoulder areas Focus on the back waist area. The footrest and backrest lifting together, combined with air pressure massage to stretch the legs, remove fatigue, and recover your body. Function Button Display Massage ball adjustment Massage Speed Width Back stretch Shiatsu Speed, width Kneading: Speed Tapping: Speed, width Kneading and tapping: speed Knocking: Speed, width 3 adjustable level 3 adjustable level The massage hand stay in fixed positon The massage hand will move up and down in a partial position The massage hand will move up and down on full back The massage hand will move up and down on back and shoulder area The massage hand will move up and down on back and waist area Massage position adjustment (in fixed point, partial mode, the massage position can be adjusted). Massage hand move up Massage hands go down During the body scan process (the shoulder position adjustment icon will be displayed on the screen of the controller and sounds “DiDi”, and then press the shoulder position up and down keys to adjust the shoulder position). You can also press any of the six automatic massage function keys (comfort, ease, full body, neck shoulder, back waist, stretch) and start massage (you can skip step 4 directly). 1.Switch power supply on Diagram of plug in Diagram of the switch position of power supply FUSE: T5AL 250V POWER INPUT CONTROLLER JACK ON/OFF 2.Start to massage ① Press the power button to start massage. ② The chair conduct a body scan and testing your shoulder position and massage point, waiting for detection to be completed ③ If the body scan deviates from the actual shoulder position, adjust the up and down buttons to the appropriate position. There are 10 levels to adjust, and you have10 seconds to make the adjustment. After 10 seconds, enter in to massage automatically. Button Description Display Move the massage balls upward to a suitable position Move the massage balls downward to a suitable position Shoulder adjust High shoulder position suitable shoulder position Low shoulder position ④ Choose massage function and start massage

3. Hang the calf of the fixed block on the massage chair frame hook (Figure 3). 4.Then use 4 (each side two pcs) M4 screws to fasten the calf to the massage chair, check whether there is any abnormality, whether the pipeline is folded or not, and finish the installation (Figure 4). Method of usage Method of usage 3.Turn off the power and stop massage. ·When pressing the power button during the massage, it will stop all the massage functions immediately, the backrest and footrest will go back to the default posit on. And when the massage times up, the massage hand will go back to the default position, all the massage function will stop, the backrest and footrest will not go back to the default position. ·Cut off the power of the whole machine. Figure (switch power off) Diagram of the power switch position Unplug the power cord 4.The calf installation. After connecting the air hose and the wire harness on the calf and the massage chair, untie the fixed line belt and insert the connecting part into the frame (Figure 1). ·Air pressure massage ·Foot roller manual massage function ·Pause/start massage button ·Backrest and calf position adjust ·Other manual functions min Function Button Description Display Air pressure mode Intensity Full air pressure: air pressure massage on arm, leg and foot. Arm: Air pressure massage focus on arm. Legs: Air pressure massage focus on leg and foot. 3 levels adjustable Function Button Description Display Foot roller Roller intensity The foot roller massage function turn on or off. After the foot roller massage is turned on, the massage intensity can be adjusted: mild, medium and strong. Function Button Description Display Pause/ Start Press this button during the massage, all massage actions are stopped immediately (the timer will continue to count down), and press this button again, all the massage will be resume. Function Button Description Lifting button Lying button Automatic lying mode Press and hold this button, it will raise the backrest and lower the footrest simultaneously, a "Di.Di" sound indicates that it has reach the maximum position and stops. Press this button again while lifting, then immediately stop. Press and hold this button, it will lower the backrest and raise the footrest simultaneously, a "Di.Di" sound indicates that it has reach the maximum position and stop. Press this button again while lifting, then immediately stop. When pressing this button, it will automatically place you into one position, total three position switch. Function Button Description Display Timing Timing Timing adjustment, press one time, add 5 minutes, not more than 30 minutes. If it exceeds 30 minutes, it will return to 5 minutes.

275mm away from the wall. If the backrest is too close to the wall, it will be collide the wall and cause damage to the product when it laying down. 275mm Method of usage 8.The distance from the wall 7.Method of movement ·Make sure that all wires are far above the ground, tilt the backrest backward to a certain degree (with the gravity center resting on the wheels), push the chair forward or backward with your hands and finally resume the chair to the normal position in a slow and gentle manner. Note: During movement you must turn off the power first and then unplug the power cord and the controller cord. Method of usage 1 2 5. Head cushions and backrest pad's dismounting and use manual ·The head cushion allows you to control the intensity of the neck and shoulder massage, You can decide whether to use the head cushion (Recommend to use). The backrest cushion and the backrest is connected by a zipper (1), head cushion and the backrest cushion connected by the Velcro as show in the illustration (2). Zipper Thread gluing ·Do not put the heavy massage chair directly on the wood floor for it may cause damage the floor, so please place a carpet or other object to avoid this damage. Caution: Do not move the chairs with its wheels on the wooden floor, rough ground, or in a narrow space. Two people are required to lift the chair. During the lifting period, take the calf rest end sealing plate and backrest cover grooves as the force- bearing point(Please do not lift armrest directly.) 6.Floor Protection

Rated voltage: 110-120V~ 60Hz Rated power input:110W Rated time: 20Min Safety structure: Class I Material introduction: PVC, PA, steel parts and electric & electron parts MATERIAL PU LEATHER CLOTH WOOD