Mitsubishi Electric MR-J5-G Series Operation & User’s Manual

MR-J5W_-_G The following is an example using MR-J5W3-_G. *1 The MR-J5W2-22G has no cooling fan. *2 To configure the absolute position detection system by using a direct drive motor, the battery is required. When the absolute position detection system is to be configured by using the HK series servo motor, the battery is not required. U V W U V W U V W M E M E M E CNP1 TRM (A) CNP2 P+ C D MCCB MC CNP2 CNP3A CN2A CNP3B CN2B CNP3C CN2C CN4 CN3 CN6 CN5 USB MR-BT6VCASE L1 L2 L3 L11 L21 CN8 CN1A CN1B + + U U U *1 CNP1 P4 N- *2 Regenerative option Diod ...

6.2 Handling of AC servo amplifier batteries for the United Nations Recommendations on the Transport of Dangerous Goods ■Transportation of lithium metal batteries alone ■Transportation of lithium metal batteries packed with or contained in equipment • For batteries packed with equipment, follow the necessary requirements of UN3091 PI969. Batteries are classified into either Section II/Section I depending on the lithium content/packaging requirements. • For batteries assembled in equipment, follow the necessary requirements of UN3091 PI970. Batte ...

5.1 Inspection items 5 MAINTENANCE, INSPECTION AND PARTS REPLACEMENT 5.1 Inspection items Precautions • To prevent an electric shock or a fire, do not disassemble, repair, or modify the product. Disassembled, repaired, and/or modified products are not covered under warranty. • For repair and parts replacement, contact your local sales office. • To prevent a malfunction, do not perform an insulation resistance test (megger test) on the servo amplifier. Periodic inspection Perform the following inspections. • Check for loose termin ...

29 3 Test operation select switch (SW3-1) To use the test operation mode, turn "ON (up)" the switch. Turning "ON (up)" the test operation select switch enables the test operation mode. In the test operation mode, the functions such as JOG operation, positioning operation, and machine analyzer are available with MR Configurator2. Page 43 Test operation Disabling control axis switches (SW3-2, SW3-3, and SW3-4) Turning "ON (up)" the disabling control axis switch disables the corresponding servo motor. The servo motor will beco ...