Ramtech Electronics WES3 Troubleshooting Manual
Text of the manual
Taken from WES3 Installation and Operations Manual V1.4 Ramtech Electronics 2018
LED Codes
Base Station Warning Codes
The Base Station will alert you to various system faults using the codes below:
WES3 Troubleshooting Guide
Green LED
Active units with no faults will flash their green LEDs once every 4 seconds
to indicate that the unit is operational.
Amber
Taken from WES3 Installation and Operations Manual V1.4 Ramtech Electronics 2018
Tel: 0115 822 3424
Email: [email protected]
Web: www.wesfire.com
electronics
Unit Sounds
Call Point unit periodically beeping after an alarm has been reset
Call Point needs to be manually reset using the key provided.
Base Station beeps frequently
System warning. If alarm has be
