PartySpace Bonga Instruction Manual

STANDARD PARTS These parts are included in the Standard 10m x 15m Bonga Stretchtent OPTIONAL PARTS These parts are available on demand. (NOT INCLUDED IN STANDARD TENT) SET OF ALUMINIUM POLES DESCRIPTION SIZE MATERIAL QUANTITY CANVAS 10m x 15m fabric 1 SIDE CLAMPS + GRIP 10cm x 11 cm x 10cm reinforced polymere 20+4 CORNER CLAMPS + GRIP 10cm x 11 cm x 10cm reinforced polymere 4 POLECAPS 9cm x 5cm reinforced polymere 16 WOOD ADAPTORS 4cm x 4,5cm reinforced polymere 16 PEGS for lawn and clay 50 cm galvanised steel 28 STRAPS lenght: 4 meter nylon, galvanised steel 28 BAG PVC PVC 2 DESCRIPTION SIZE material QUANTITY POLE 110CM 110cm x 40mm diameter aluminium extrusion 60 POLE 50CM 50cm x 40mm diameter aluminium extrusion 14 CONNECTOR 20cm x 40mm aluminium extrusion 46 POLE FEET 60mmx 40mm reinforced polymere 30

SIDE CLAMP The Bonga Stretchtent uses side clamps to hold the tent. You can put them on the reinforced zones every meter in the sideseams of the tent Material: reinforced polymere Size: 11cm x10cm x 10cm Weight: 300gr Galvanized steel nut, bolt and ring The side clamps have a grip on the bottom side: you can slide a pole of 40mm diameter on the grip If you remove the grip and put back the M8 nut, you can use this configuration to simply slide it on a wooden pole STRAPS The straps connect the clamps with the pegs Material: nylon and galvanized steel Size: 4m x 30mm Weight: 190gr

the tent. Material: reinforced polymere Size: 11cm x10cm x 10cm Weight: 300gr Galvanized steel nut, bolt and ring The corner clamps have a grip on the bottom side: you can slide a pole of 40mm diameter on the grip If you remove the grip and put back the M8 nut, you can use this configuration to simply slide it on a wooden pole POLECAPS/ MUSHROOM This cap is used to put at the end of the CENTER POLES, to protect the canvas. Material: reinforced polymere Size: 90mm x 50mm Weight: 110gr You can slide aluminium standard poles of 40mm and 60mm into the pole cap If you use wooden poles, you can use the wood adaptors delivered with your tent to fix a pole cap on a wooden pole

CENTER POLES. It is used to fix a pole cap on a wooden pole. Material: reinforced polymere Size: 40mm x 45mm Weight: 100gr LAWN AND CLAY PEGS We deliver standard pegs for lawn and clay of 50cm Material: galvanised steel Size: 50cm x 70mm x 20mm Weight: 450gr With the

SET OF ALUMINIUM POLES - diameter 40 mm - includes: poles of 110 cm poles of 50 cm adaptors to connect poles in between polefeet - modular and compact - in a heavy PVC bag - pole feet (can be used for poles 40 diameter and 60 diameter) XL POLE CAP - extra wide polecap - used for large tents - sizes: diameter: 19 cm height: 5 cm - fits for poles of 40mm diameter and 60mm diameter or with woodadaptor on wooden poles

Warning: Only put the side fixings on the reinforced zones! See setup instructions.

Never use straps with ratchets, use the straps delivered with the tenT WASHING INSTRUCTIONS Use a jetwasher. Never go closer then 20cm! Use a soft brown/black soap with a soft sponge to remove stains Never use aceton / thinner or anu kind of solvent

This is a recommended setup option to start with H= Height of the pole D= Distance from pole to peg Warning: Only use when less then 85 kmph

This is a recommended setup option to start with H= Height of the pole D= Distance from pole to peg Warning: Only use when less then 85 kmph Put the closed side in the direction of the wind

PROTECT YOUR TENT Unfold a plastic groundsheet to prevent stains Unfold the tent on the plastic groundsheet

The tent is always delivered with the corner fixings attached. When you unfold the tent, the grips of the corner fixings should face the ground. Warning: always make sure the grip is well tightened! Check before you put up the tent!

ATTACH THE SIDE clampS Take the plan ‘REINFORCED ZONES’ delivered with this tent to guide you further Only put the side clamps on the reinforced zones! You can see and feel them when you go over the canvas Always make sure the grip is well tightened! Check before you put up the tent! ATTACH the straps to the clamps

Put the pegs The Bonga Stretchtent is standard delivered with pegs for lawn and clay. If you have another surface, please use the suitable pegs! (to find in section ‘optional parts’) The distance (D) of the pegs from the tent is equal to the height (H) of the pole you will use (H=D). The pegs should be placed under an angle of 45° for optimal grip and force resistance. ATTACH THE STRAPS BETWEEN THE PEGS AND THE FIXINGS Make the tension on the straps very loose. D

USE OF WOODEN POLES (turn you page if you use aluminium standard poles) If you wish to use wooden poles on the sides follow these instructions: If you wish to use wooden poles on the corners follow these instructions: 1. make a hole in the top of your pole of 13mm diameter and 60mm deep 2. unscrew the grip 3. put back the extra long M8 nut 4. slide the screw into the hole of the wooden pole 1. make a hole in the top of your pole of 13mm diameter and 60mm deep 2. unscrew the grip 3. put back the extra long M8 nut 4. slide the screw into the hole of the wooden pole

USE OF aluminium POLES 40mm DIAMETER Slide the grip into the aluminium pole of 40 diameter SUGGESTION: REMOVE PEGS EASILY Do you want to remove a peg? Use this system. Take a wooden or alumium pole from +/- 2m, attach a short strap around it. Attach the strap to the peg and push the top of the pole upwards.

put up the side poles Put up the 4 corners. Adjust the straps so they are still quite loose. Put up 2 oposite sides. Always choose the sides in the direction of the wind. It will help you! Don’t put too much tension on the straps! Just a little, so the canvas is off the ground. Put up the 2 other sides

put the center poleS Warning: Never put a center pole without a polecap! Start with the side poles of the tent. Keep the center poles always for last. If you use alumium poles of 40mm diameter or 60mm diameter, you can easily slide them on the poles. If you use wooden poles, you can follow these steps: 1. make a hole in the wood, screw the wood adaptor onto the wooden pole 2. slide the pole cap over it.

THE ‘perfect’ tension How do you measure the ‘perfect’ tension? If you are still able to move a strap of 2meters, 10cm back and forth with your fingers, the tension is ‘perfect’. If you cannot do that, you have put too much tension on the tent. Warning: Never put too much tension on the tent! It can dammage your tent. Never use straps wit ratchets You can also put extra side clamps in the line of the welded seams. It is in any case always a good idea to put the clamps at the end of the welded seams, it will give you less ‘wrinkles’.

instructions When there is a risk of a strong wind, it is recommended to put a stormbelt on top of the tent. Where to put the stormbelt? Take the plan ‘SETUP OPTIION’ delivered with this tent to guide you further. SIDEVIEW