WASD V3 Operation & User’s Manual

The V3 keyboard features a DIP switch on the backside of the keyboard to enable or disable various modes of function. DIP Switch Settings Unplug keyboard before changing DIP switch positions. Plug keyboard back in for new settings to take effect. Switch State Function Notes SW1 Off, SW2 Off Qwerty mode Standard QWERTY Layout SW1 On, SW2 On Mac mode Reverses Alt and OS Key positions SW3 Off/On Disabled until v1.0 SW4 Off/On Factory Reset This action will revert all keyboard settings back to factory defaults. Unplug keyboard and set SW4 On. Plug in Keyboard. All indicator LED’s will flash red for 20 seconds and then turn solid green which means factory reset is complete. SW5 Off Fn Key Enabled When Fn Key is enabled, you can access the built in multimedia and lighting control keys. Default position of Fn is the Menu Key SW5 On Fn Key Disabled SW6 Off Pgm Key Disabled Enable the Pgm Key to access keyboard programming functions. Default position of Pgm is the right Ctrl Key (R_Ctrl) SW6 On Pgm Key Enabled *Keyboard must be powered off to switch modes.

Media Keys Notes Fn + Insert Play / Pause Fn + Home Stop Not supported by OSX Fn + Delete Previous Fn + End Next Fn + Page Up Volume Up Fn + Page Down Volume Down Fn + Pause Mute LED Lighting Controls (CODE Models Only) Fn + F11 Adjust LED backlighting brightness CODE Models Only Fn + F12 Turn LED backlighting on / off CODE Models Only Indicator LED Programming Controls Fn + F6 Red Level 0-9 Fn + F7 Green Level 0-9 Fn + F8 Blue Level 0-9 *SW5 must be On for Function Commands to work Indicator LED Programming 1. Enable Pgm Key (default position for Pgm Key is R_Ctrl Key) 2. Press Pgm + Scroll Lock to enter Indicator LED Programming Mode. The Indicator LED’s will flash green momentarily 3. Press the key of the target indicator LED (ie: Caps Lock, Scroll Lock, Num Lock) 4. Press Fn + F6, F7, or F8 to cycle through RGB colors Fn + F6 Red Level 0-9 Fn + F7 Green Level 0-9 Fn + F8 Blue Level 0-9 5. Press Pgm to save color 6. You may go back to Step 3 to program another indicator LED or press Pgm + Scroll Lock to exit Indicator LED Programming