THORENS TD160 Fitting Instructions Manual
Text of the manual
Fitting The Wand Tonearm® to a Thorens TD160 family turntable (TD150/166 similar)
You should be able to use the Thorens arm lifter with The Wand Tonearm To be read in conjunction with The Wand User Guide.
A; Remove the existing arm
Step 1; Remove the platter, headshell and Step 2; Support the turntable upside down
Lifter bar (arrowed) D
Fitting The Wand Tonearm® to a Thorens TD160 family turntable (TD150/165 similar)
You may choose to use the Thorens arm lifter with The Wand To be read in conjunction with The Wand User Guide.
B; Prepare The Wand Mounting
Step 1; Stack the Steel plate on top of black acrylic
Step 2; Add the Wand mount & feed through the plinth (Wand Classic left, Wan
Fitting The Wand Tonearm® to a Thorens TD160 family turntable (TD150/165 similar)
C; Fitting The Wand Tonearm Mount
Step 1; Install the spindle into mounting plate. Set the spindle height using the protractor.
Lock in position using the nut (Classic) or grub screw (Plus).
Step 2; Position the mount using the Step 3; Tighten the three scr
