U-Tech CAMGUARDIAN UCG-H2D44B1 Quick Start Manual
Text of the manual
Connect the mouse(supplied) to the USB port located at the rear of the H2-D4.
Congratulations on the purchase of your U-tec CamGuardian. This quick start guide will assist you
on getting your H2-D4 up and running as soon as possible. We recommend that you connect
everything and give it a try before you do a permanent installation, to make sure nothing was
da
If you have a monitor with a VGA connection, connect a VGA cable(not supplied) to the VGA
output on the H2-D4, and connect the other end to the VGA input on the Monitor. You can skip
this step if you are using the supplied HDMI cable.
Connect the HDMI cable(supplied) to the HDMI input on the H2-D4, and connect the other end to
a spare HDMI input on the TV. M
