TOOLCRAFT LDM X100 Operating Instructions Manual

Page 1. Introduction ................................................................... 4 2. Explanation of symbols ................................................ 4 3. Intended use ................................................................. 5 4. Package contents ......................................................... 6 5. Features and functions ................................................. 6 6. Safety instructions ........................................................ 7 a) General information................................................. 7 b) Laser ....................................................................... 8 c) Batteries ................................................................ 10 7. Product overview .........................................................11 8. Display ........................................................................ 12 a) Measuring ............................................................. 12 b) Measurement reading ........................................... 13 9. Inserting (rechargeable) batteries .............................. 13 10. Charging the batteries ................................................ 15 11. Switch device/laser on/off ........................................... 16 12. Touchscreen operation ............................................... 16 13. Settings ...................................................................... 17 14. Distance measurement .............................................. 19 15. Continuous measurement .......................................... 19 16. Area measurement ..................................................... 20 17. Volume measurement ................................................ 20 18. Indirect measurement ................................................. 21 a) With two reference points...................................... 21 b) With three reference points - Variant A .................. 22 c) With three reference points - Variant B ................. 23 19. Automatic level calculation ......................................... 23 20. Automatic height calculation ....................................... 24 21. Distance between two points (P2P) ........................... 24 2

23. Camera (only LDM X100) ........................................... 26 24. Data export (only LDM X100) ..................................... 27 25. Tips and useful information ........................................ 28 26. Troubleshooting .......................................................... 28 27. Care and cleaning ...................................................... 29 28. Declaration of Conformity (DOC)................................ 30 29. Disposal ...................................................................... 30 a) Product .................................................................. 30 b) Batteries ................................................................ 31 30. Technical Data ............................................................ 31 3

This product complies with statutory national and European regulations. To ensure that the product remains in this state and to guarantee safe operation, always follow the instructions in this manual. These operating instructions are part of this product. They contain important information on setting up and using the product. Do not give this product to a third party without the operating instructions. Therefore, retain these operating instructions for reference! For technical queries, please contact: International: www.conrad.com/contact United Kingdom: www.conrad-electronic.co.uk/contact 2. Explanation of symbols The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to an electric shock. The symbol with an exclamation mark in a triangle is used to highlight important information in these operating instructions. Always read this information carefully. The arrow symbol alerts the user to the presence of important tips and notes on using the device. This symbol indicates the built-in laser. 4

The product is used for the measurement of distances, surfaces and volumes. Allows addition and subtraction of readings. Calculates height based on the Pythagorean Theorem. The product can be connected via Bluetooth with a smartphone app. The app allows you to edit and evaluate the measured data. This product can also be controlled via the app. For safety and approval purposes, you must not rebuild and/ or modify this product. Using the product for purposes other than those described above may damage the components. In addition, improper use can cause hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe place. Only make this product available to third parties together with its operating instructions. All company and product names are trademarks of their respective owners. All rights reserved. 5

• Laser rangefinder • USB charging cable • Storage pouch • Hand strap • 3x rechargeable battery (NiMH, 900 mAh) • Operating instructions The manual for the app is available for download as a separate document. Refer to the following paragraph. Up-to-date operating instructions To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR code on this page. Follow the instructions on the website. 5. Features and functions • Dust-proof and protected against water jets (IP65) • Housing with impact protection (max. drop height 2 m) • Area calculation • Volume calculation • Indirect measurement (Pythagoras) • Continuous measurement with display of minimum/ maximum distance • Addition/subtraction function • Automatic level and height calculation • Tripod socket 6.35 mm (1/4”) • 3 measurement references (front face, tripod socket, back face) • Measured value memory 6

• Digital water level • Touchscreen • Bluetooth function for connection to a smartphone app • Camera for targeting (only LDM X100) 6. Safety instructions Read the operating instructions and safety information carefully. If you do not follow the safety information and information on proper handling in these operating instruction, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee. a) General information • The device is not a toy. Keep it out of the reach of children and pets. • Do not leave packaging material lying around carelessly. It may become a dangerous toy for children. • Protect the product from extreme temperatures, impacts, flammable gases, vapours and solvents. • The product is only protected against water jets if the charging connection and the battery compartment are securely locked. • Do not place the product under any mechanical stress. 7

safely, stop using it and prevent unauthorised use. Safe operation can no longer be guaranteed if the product: - is visibly damaged, - is no longer working properly, - has been stored for extended periods in poor ambient conditions or - has been subjected to any serious transport-related stress. • Always observe the safety and operating instructions of any other devices which are connected to the product. • Consult a technician if you are not sure how to use or connect the product. • Maintenance, modifications and repairs must be done by a technician or a specialist repair centre. • If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel. b) Laser • When operating the laser equipment, always make sure that the laser beam is directed so that no one is in the projection area and that unintentionally reflected beams (e.g. from reflective objects) cannot be directed into areas where people are present. • Laser radiation can be dangerous, if the laser beam or its reflection enters unprotected eyes. Before using the thermometer, familiarise yourself with the statutory regulations and instructions for operating such a laser device. 8

it at people or animals. Laser radiation can seriously damage your eyes. • If laser radiation enters your eyes, close your eyes immediately and move your head away from the beam. • If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety implications, such as working with machines, working from great heights or close to high voltage. Do not drive any vehicles until the irritation has completely subsided. • Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam may strike people or animals. • Never open the device. Configuration or maintenance tasks must only be completed by a trained specialist who is familiar with the potential hazards. Improperly executed adjustments might result in dangerous laser radiation. • The product is equipped with a class 2 laser. Laser signs in different languages are included in the package. If the sign on the laser is not in your local language, attach the appropriate sign to the laser. • Caution: Using equipment or procedures other than those described in these instructions could lead to exposure to dangerous radiation. 9

correct polarity. • To prevent battery leakage, remove the batteries when you do not plan to use the product for an extended period. Leaking or damaged batteries may cause acid burns if they come into contact with your skin. Always use suitable protective gloves when handling damaged batteries. • Batteries must be kept out of the reach of children. Do not leave batteries lying around, as there is a risk that children or pets may swallow them. • All batteries must be replaced at the same time. Mixing old and new rechargeable batteries can cause the batteries to leak and damage the product. • Batteries must not be dismantled, short- circuited or thrown into flames. Never recharge non-rechargeable batteries. Danger of explosion! 10

2 3 4 5 6 1 1 Measuring sensor 2 Laser aperture 3 Display 4 Camera button (only LDM X100) 5 MEAS button 6 On/off switch 11

8. Display a) Measuring D E F G A B C 12

points A Measurement reference B Bluetooth C Digital water level D Battery condition E Angle F Measurement mode G Measurement reading b) Measurement reading H I J K L Example: Volume measurement H Measurement mode I First line segment J Second line segment K Third line segment L Volume 9. Inserting (rechargeable) batteries Delivery includes 3 rechargeable batteries. The product can also be operated with conventional batteries. Never use rechargeable batteries and conventional batteries simultaneously. Only use NiMH rechargeable batteries or alkaline batteries. 13

• Remove the battery compartment cover. If you have difficulty removing the battery compartment cover, use a tool to help (e.g. slotted screwdriver). • Insert 3 AAA batteries or rechargeable batteries with correct polarity. Pay attention to the polarity markings inside the battery compartment. • Make sure that the sealing ring on the inside of the battery compartment cover is correctly installed. • Replace the battery compartment cover. • Slide the battery compartment cover upwards. 14

batteries as soon as the battery status display shows an empty battery. 10. Charging the batteries Never attempt to recharge disposable batteries. Danger of explosion! Please fully charge the rechargeable batteries before initial operation. The USB power supply must be able to supply a current of 500 mA. • Turn the cover that covers the charging port 180° to the side. • Connect the product via the included cable with a USB power supply or a computer. The display shows a short reminder that conventional batteries cannot be recharged. Then the charging process starts. • The rechargeable batteries are charged when the battery state indicator is lit green. • Only LDM X100: If you charge the product via a computer, safely eject the product via the operating system. 15

source as soon as the rechargeable batteries are charged. 11. Switch device/laser on/off • Press and hold the on/off button approx. 1 second to turn on the product. • Briefly press the MEAS button to activate the laser. • Briefly press the on/off button to deactivate the laser. • Press and hold the on/off button for approx. 1 second to turn the device off. The product switches off automatically after 3 minutes of inactivity. 12. Touchscreen operation • Swipe right to show the overview of the different measuring modes. Then swipe up or down and tap the desired measurement mode. • Swipe left to add/subtract measurements. This is possible with simple distance measurement as well as when measuring surface area and volume. • Swipe down to access the setup menu. Swipe up to close the setup menu again. • Briefly press the on/off button to return to the main screen. 16

1 4 2 5 3 6 1 Bluetooth 2 Unit 3 Measurement reference 4 Digital water level 5 Image rotation 6 Memory Bluetooth • To connect the device with the app, Bluetooth must be enabled. • Tap the icon to activate/deactivate Bluetooth. • If the letter A appears next to the icon, the measured data is automatically sent to the app. • If the letter M appears next to the icon, the measured data can manually be sent to the app. In any measurement mode, swipe to the left and tap the Bluetooth symbol to send the current measurement data to the app. • If the icon is highlighted in grey, Bluetooth is disabled. The manual for the app is available for download as a separate document. Refer to the information in chapter 4. 17

• m = meters • ft = foot • in = inch • ---’--” = feet/inches Measurement reference The following measurement references are available: Starting point: Back The length of the device is included in the measured value. Starting point: Tripod thread Starting point: Front Digital water level The water level helps you to precisely align the product. 18

the display by turning the product. • If the icon is displayed on a grey background, image rotation is disabled. Memory • Press the MEAS button or swipe left/right to display the stored measured values. • Only LDM X100: To delete the displayed measured value, press the camera button. The last measurement results will be stored automatically. 14. Distance measurement • Press the MEAS button to activate the laser. • Point the laser point at the target at a right angle and try to hold the device as calm as possible • Press the MEAS button. After a short time, a beep signal sounds and the measured value is displayed on the display. 15. Continuous measurement • Press and hold the MEAS button for approx. one second to switch to continuous measurement mode. • The laser is activated. The distance is now measured continuously. 19

registered measured value of the measurement process. • To exit continuous measurement mode, press the MEAS or the on/off button. • After 5 minutes of inactivity, this feature is automatically deactivated. 16. Area measurement • Swipe right and select the following function: • Measure the two sides of the area. • The device automatically multiplies the measured values. 17. Volume measurement • Swipe right and select the following function: 20

• The device automatically multiplies the measured values. 18. Indirect measurement The Pythagorean theorem (a2+b2=c2) can be used to indirectly determine the height of an object. Make sure that the starting point for the individual measurements is exactly the same position. a) With two reference points • Swipe right and select the following function: 21

the previous figure for the right order. • The height is calculated automatically and will appear in the bottom row. b) With three reference points - Variant A • Swipe right and select the following function: • Now measure the three required line segments. Please see the previous figure for the right order. • The height is calculated automatically and will appear in the bottom row. 22

• Swipe right and select the following function: • Now measure the three required line segments. Please see the previous figure for the right order. • The partial height between points 1 + 2 is automatically calculated and displayed in the bottom line. 19. Automatic level calculation • Swipe right and select the following function: 23

previous figure). • The result is calculated automatically. 20. Automatic height calculation • Swipe right and select the following function: • Now measure the two required line segments. Please see the previous figure for the right order. • The height is calculated automatically and will appear in the bottom row. 21. Distance between two points (P2P) • Swipe right and select the following function: 24

calibrates. Do not move the device during this time. Wait until the warning message disappears. If self-calibration fails, the list of all measurement modes is shown again. Repeat the procedure in this case. • Now measure the two required line segments. Please see the previous figure for the right order. • The distance is calculated automatically and will appear in the bottom line. 22. Adding/subtracting • Measure the first segment. • Swipe to the left. 25

• Measure the next line segment. • The sum or difference will be shown in the bottom row. This process can be repeated as often as desired. You can also add/subtract areas or volumes. 23. Camera (only LDM X100) Instead of the target laser, you can use the built-in camera to target the measuring point. • Press the camera button if desired before a measurement. The camera image and a crosshair appear on the display. 26

and four-time magnification. The magnification factor is shown in the top right of the display. • Once you have targeted the measuring point, make your measurements as usual. Any ongoing measurement (e.g. volume measurement) is not affected. Previously registered values are retained in the buffer. 24. Data export (only LDM X100) As soon as the product is connected to a computer, the charging process starts. If you operate the product with conventional, non-rechargeable batteries, remove them before connecting the product to a computer. • Connect the product with the included cable to your computer. The product is shown as a drive with the name “Laser- Meter". • On the drive, there is a file named “DISTANCE.CSV". Copy the file in your desired directory. • Safely eject the product via the operating system before you disconnect the cable. 27