Shure SM58 Manual 

General Description The Shure SM58 is a unidirectional (cardioid) dynamic vocal microphone for professional vocal use in sound rein­ forcement and studio recording. A highly effective, built­in, spherical filter minimizes wind and breath “pop” noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shockmount system, and a steel­mesh grille ensure that even with rough handling, the SM58 will perform consistently. Out­ doors or indoors, singing or speech, the SM58 is the overwhelming choice of professionals worldwide. Features • Performance tested, industry standard • Uniform cardioid pick-up pattern for maximum gain before feedback and excellent rejection of off-axis sound • Tailored frequency response specifically shaped for vocals, with brightened midrange and bass roll off to control proximity effect • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration • Steel-mesh grille and enamel-coated metal construction resist wear and abuse • Effective built in pop-filter reduces undesirable wind and breathe noise • Furnished with zippered storage bag and break-resistant stand adapter • On/Off switch (SM58S only) • Extremely durable under the heaviest use • Shure quality, ruggedness and reliability Placement General Rules for Use • Aim the microphone toward the desired sound source (such as the talker, singer, or instrument) and away from unwanted sources. • Place the microphone as close as practical to the desired sound source. • Work close to the microphone for extra bass response. • Use only one microphone to pick up a single sound source. • Use the fewest number of microphones as practical. • Keep the distance between microphones at least three times the distance from each microphone to its source. • Place microphones as far as possible from reflective surfaces. • Add a windscreen when using the microphone outdoors. • Avoid excessive handling to minimize pickup of mechanical noise and vibration. ®

mance. Applications And Placement The following table lists the most common applications and placement techniques. Keep in mind that microphone technique is largely a matter of personal taste; there is no one “correct” microphone position. Application Suggested Microphone Placement Tone Quality Vocals Lips less than 15 cm (6 in.) away or touching the windscreen, on axis to microphone. Robust sound, emphasized bass, maximum isolation from other sources. 15 to 60 cm (6 in. to 2 ft.) away from mouth, just above nose height. Natural sound, reduced bass. 20 to 60 cm (8 in. to 2 ft.) away from mouth, slightly off to one side. Natural sound, reduced bass and minimal “s” sounds. 90 cm to 1.8 m (3 to 6 ft.) away. Thinner, distant sound; notice­ able levels of ambient noise. Avoiding Pickup of Unwanted Sound Sources Place the microphone so that unwanted sound sources, such as monitors and loudspeakers, are directly behind it. To minimize feedback and ensure optimum rejection of unwanted sound, always test microphone placement be­ fore a performance. Recommended Loudspeaker Locations for Cardioid Microphones Proximity Effect Unidirectional (cardioid) microphones progressively boost bass frequencies by 6 to 10 dB below 100 Hz when the microphone is at a distance of about 6 mm (1/4 in.) from the sound source. This phenomenon, known as proximity effect, can be used to create a warmer, more powerful sound. To prevent explosive low frequency sound during close­up use, the bass response gradually rolls off. This provides greater control and helps the user take advan­ tage of proximity effect.

Frequency Response 50 to 15,000 Hz Polar Pattern Cardioid Output Impedance 300 Ω Sensitivity at 1 kHz, open circuit voltage -56.0 dBV/Pa (1.6 mV) 1 Pa=94 dB SPL Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Net Weight 0.33 kg (0.72 lb) Connector Three-pin professional audio (XLR), male Housing Dark gray, enamel-painted, die cast metal; matte-finished, silver colored, spherical steel mesh grille Wiring Diagram [1] [1]

Typical Polar Pattern Overall Dimensions Accessories Furnished Accessories Microphone Clip for SM58, SM57, SM87A, BETA87A, BETA87C, PGA57, PGA58, PGA48, PGA81 A25D Carrying/Storage Bag 95A2313

blue, gray, green, red and yellow A58WS Desk Stand S37A Shock Stopper® Isolation Mount A55M Shock Stopper Isolation Mount A55HM Over/Under Dual Mount for two microphones: SM57, BETA57A or 545 Series microphones A26M 25 foot (7.5m) Triple-Flex® Microphone XLR Cable with Switchcraft connectors C25E 25 foot (7.5m) Triple-Flex Microphone XLR Cable with chrome connectors C25F Replacement Parts Grille for Wired and Wireless SM58 RK143G Cartridge for SM58 R59 Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: [email protected]