Trainertec Electronic DT1200V Operation Manual

shock and vibration intensity 7. Dog Selection Button allow you to select your dog 8. Lcd digital display for 10 shock & vibration levels and dog ID 9. Memorize shock & vibrate level in transmitter for different dogs 10. Easy to operation with rubber button 11. Waterproof transmitter and receiver. Dog can swim freely. 12. Rechargeable 3.7V Li-ion battery for transmitter and receiver 13. Strong TPU Collar Strap 14. Led low power indication, red light will flash when battery level is low. 15. Full functional multi-dog training system 16. A ...

” button until LCD display occur then release , Transmitter is power on . Step 3: Press and hold “ ” button and “ ” button at the same time ,until the digital number on the LCD display change automatically ,then release. Enter cancel matched receiver mode . The number changes like “08,09,10,11……”, increasing automatically Step 4 : Close the Receive Collar 50~100mm, Press the Dog Selection Button one time ( You can press “1” or “2” or “3” freely, It is same). You can listen to 2 “beep” sound from receiver. Step 5 : The green Led lig ...

Components…………………………….…….....3 How the system works…………………………..3 Main Features……………………….…..……….4 Transmitter……………………………...….........6 Receive Collar……………………...………........9 Setting Up Multi-dog System……….………….10 Charging ……………………………..……........14 Training Guide ………………………............…16 Troubleshooting Guide……………...…...…..…17 - 2 - ...

Enter match receiver mode . The number changes like “08,09,10,11……”, increasing automatically . Step 4 : Take the transmitter to close the unmatched receiver 50~100mm . Step 5 : Press and hold on the Dog selection button .If you match “1” dog, Press “1” button ; If you match “2” Dog , Press “2” button ; If you match “3” dog , Press “3” button .After listen to 3 “beep” sound from receiver and see green Led flash slow down , Then release . Special note: You must confirm that listen to 3 sound “beep” from ...