Volt VWL-712-BBZ Installation Instructions Manual

© Copyright 2018, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved. [email protected] • 813.978.3700 Help Hotline: 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST) –1– VOLT® Low Voltage Landscape Lighting VOLT® Salty Dog Brass LED Well Light VWL-712-BBZ all-guide s.com

VWL-712-BBZ INSTALLATION INSTRUCTIONS w w w . v o l t l i g h t i n g . c o m Important: Please Read Before Installation Important Safety Instructions ! ! This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty. These instructions do not intend to cover all variations in installation, operation maintenance or mounting situations. 1.  Make sure that the power is turned OFF before installing or servicing this luminaire. 2.  WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more from pool, spa or fountain. 3.  This luminaire is intended to be used only with a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts. 4.  Wiring connections must be made with wire connectors that are suitable for outdoor use. 5.  Position the low voltage wire and wire connector so that it is located within 6 inches (15.2 cm) from a building structure, a luminaire or fitting. 6.  The main low voltage cable is intended for shallow burial - less than 6 inches (152 mm). 7.  If additional lengths of low voltage cable are required, please call 1-813-978-3700. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS Lighted lamp is HOT! WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS. 1.  Turn off/unplug and allow to cool before replacing lamp. 2.  Lamp gets HOT quickly! Contact only switch/plug when turning on. 3.  Do not touch the hot lens, guard or enclosure. 4.  Keep lamp away from materials that may burn. 5.  Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp. 6.  Do not operate the luminaire fitting with a missing or damaged shield. –2–

Package Contents A.  (1) Fixture B.  (1) PVC Tube Product Dimensions –3– 8.25” 6.25” 5.5” Dig Hole 1 3” 3” 3” Dig a hole in the ground. Make sure there is approximately 3 inches surrounding the PVC Tube for pea gravel or sand on all sides. PVC Tube Hole Soil

Fill Pea Gravel or Sand 3 Wire Connection 2 VOLT® Salty Dog Brass LED Well Light VWL-712-BBZ –4– Soil PVC Tube with Fixture Pea Gravel or Sand Place the fixture into the PVC Tube and pass the luminaire pigtail through the PVC Tube. Strip both leads from the luminaire pigtail. Using two wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads. PVC Tube Wire Connector Main Supply Wire Soil Pigtail Fixture Install the PVC Tube with the fixture in the hole and fill around the fixture securing it in place with pea gravel or sand to allow for water drainage.

© Copyright 2018, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved. [email protected] • 813.978.3700 w w w . v o l t l i g h t i n g . c o m Help Hotline: 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST) –8–