Audi A4 Operation & User’s Manual
Read Online
Read the Audi A4 Operation & User’s Manual online using the built-in PDF viewer.
Text of the manual
1. Main Control Processor: SiRF Atlas IV, and main frequency: 500MHZ
2. main storage: 64M ,128M (optional:DDR I)
3. Flash storage: 64M,128M,1G,2G (optional:Nand flash )
4. video output format: RGB，CVBS，YC，digital: RGB565
5. Synch signal: composite sync signal, and synchronizing signal separation
6. video output system: NTSC，PAL
7. video output resolution: 320X240,400X234,480X234,800×480
8. GPS antenna power: 3-5V
9. Operation system: WINCE.NET 6.0 Core Version
10. Input voltage: 5V-24V
11. Touching panel connection: 4PINS resistance touching function
12. Memory Card: SD/MMC/SDHC（SDHC）4GB~32GB
The OEM cable harness: Green cable
Is for reverse light +12V
14PINS LVDS cable Instruction picture 14PINS LVDS cable to Video unit: LVDS out
NAVI Touch Panel connection & Operation:
After you detached the front panel, you can also instal our filexible touch panel also in front the
Original monitor. And after finish the all installation, you can activate the GPS function first, when
Turn on power, can use igo8, Garmin NAVI MAP system.
DIP SET Instruction
Three button of video Intehration is for adjusting Picture’s: Brightness, Saturate, Contrast.
Picture position: H, L
Switch operation:
The parts with the Video Integration:
RGB, AV, Speaker, FM connector GPS Antenna Oem cable harness for plug and pla
Two LVDS cables and flexible film touch panel Unit and parts connection
