UTStarcom UT618 Operation & User’s Manual

Client: UTStarcom, Inc. 360 Herndon Parkway Model: UTS-618 Suite 1400 FCC ID: O6YUTS-618 FCC: Part 24 Herndon, VA 20170 http://www.rheintech.com Date: June 3, 2003 Page 37 of 72 APPENDIX H: MANUAL Please see the following pages.

UT618 User Manual Trademark Statement: “‘UTStarcom,’ ‘AN2000,’ and the UTStarcom logo are trademarks of UTStarcom, Inc.” Copyright Statement: “UTStarcom, Inc. 2003. All rights reserved. No part of this publication may be reproduced in any form or by any means without the prior written permission of UTStarcom, Inc.” Warranty Language: “The contents of this manual, whether in whole or in part, do not constitute any express or implied warranty with respect to any products of UTStarcom, Inc., or it subsidiaries.”

Table of Contents iii Safety Precautions Introduction � Thank you for purchasing your new UT618 phone. � Please read this instruction manual thoroughly. � The display screens, illustrations, etc., used in this document are created for instructional purposes and can differ slightly with the actual phone. How to Use This Instruction Manual 1. Getting Started Includes facts you should know before using your new phone. 2. Learning to use your phone Explains the basic operation of making and receiving calls. Explains useful convenience functions. 3. Setting up your phone Explains the basic operations to be carried out to setup the phone 4. Text Edition Provides details on Text entry and edit. 5. Phone Book Explains the management of Phone book. 6. Short Message Service Explains SMS operations 7. Email Provides information on setting up email service, sending and receiving mails etc. 8. Bookmark Explains creation and management of bookmarks 9. Air Info 10. Group Provides brief on setting up group. 11. Data Communication 12. Maintenance and Troubleshooting Explains phone maintenance and troubleshooting procedures. 13. Index Conventions used in the manual: � “press” : press a key and then release; � “press and hold down” : press a key for 2 sec or more and then release. � “service area” refers to a service coverage area where a handset can receive signals effectively. � “ ” : Proceed to the next step.

UT618 User Manual Explanation of Symbols � Before using your phone, please read the “Safety Precautions” thoroughly. � The cautions included here are provided to prevent danger to persons and property. � The following explain the degree of danger and damage that could occur if these safety precautions are not observed. This symbol indicates that erroneous operations may directly result in serious personal injury or death. This symbol indicates that erroneous operations may result in the possibility of serious injury or death. This symbol indicates that erroneous operations may result in the possibility of injury or physical damage. � Explanations of other symbols used in the manual: Prohibited This symbol indicates a prohibited action. Compulsory This symbol indicates an action that must always be performed. Disassembly Prohibited This symbol indicates that disassembly is prohibited. Remove Power Plug This symbol indicates that the power cord must be removed from the outlet.

Table of Contents v Handling the Phone, Battery, and Charger Use only the battery and charger approved for the UT618 phone. The use of any other types can result in damage to the phone, electric shock or the risk of fire. Compulsory Do not store the phone or charger in hot, wet, or dusty areas. High temperatures, humidity and dust can damage electrical and mechanical components. This can cause the phone or charger to malfunction. Prohibited Keep the phone, battery and the charger dry. Exposure to precipitation, humidity and liquids can damage electronic components and circuit boards. Prohibited Do not drop, shake or throw the phone or charger. Rough handling can break internal circuit boards and damage the battery pack. Prohibited Do not use a microwave oven or any other type of heating equipment to dry the phone, battery pack or charger. High temperature can shorten the life of electronic devices, damage the battery pack, and warp or melt plastic parts. Prohibited Do not use the phone in the vicinity of volatile gases. Leave the area before using the phone. Failure to leave the area can result in the risk of fire or an explosion. Prohibited Do not disassemble or modify the phone or charger. Incorrect modifications or reassembly can cause malfunctions or personal injury when the phone or charger is used. Disassembly Prohibited

UT618 User Manual Handling the Phone Do not use the phone while driving. Park the vehicle before using the phone. Traffic safety first. Prohibited Observe any special regulations in effect in any area (hospital, aircraft, etc) when you have to use the phone. Always disconnect the charger and remove the battery of your phone whenever it is forbidden to use it, or when it may cause interference or danger. Compulsory Do not use the phone near electronic equipment prone to interference. . Radio frequency interference may result in malfunction of the electronic equipment. The following electronic equipment can be effected: Hearing aids, pacemakers and other clinical electronic devices, fire detectors, automatic doors and other automatically controlled devices. If you have to use phone near electronic medical devices such as pacemakers, please consult device manufacturer or local dealers. Prohibited In rare cases, using the phone inside certain models of vehicles can adversely affect the electronic equipment inside the vehicle. Do not use the phone in such cases, because it is dangerous for personal security. Prohibited Keep all storage media (magnetic cards, floppy disks, credit cards, etc.,) away from the phone. Close encounters or contact can erase or damage the storage media. Prohibited Keep all sharp metal objects (Pins, Nails, Hairpins etc.) away from the handset of the phone. The earpiece of the handset contains a strong magnet that can attract and hold metal objects. Remove any objects from the handset earpiece before using to avoid personal injury. Prohibited

Table of Contents vii Handling the Battery Do not dispose of the battery pack in a fire. They may explode. Check with local waste management codes for disposal instructions. Prohibited Do not force the battery pack into the phone. Improper installation can cause malfunctions or damage the battery pack. This may result in the risk of fire or personal injury. Prohibited Use caution in handling batteries in order not to short the battery to conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns. Prohibited Do not solder the battery terminals together. This may result in a cracked or leaking battery pack or the risk of fire. Prohibited Do not open or mutilate the battery pack. Battery acid is corrosive and may cause burns or injury to eyes. If battery acid gets into the eyes, DO NOT RUB. Immediately flush the eyes with clean water and call a physician. Compulsory Do not leave or store the battery pack in hot areas (Near fire, a heater, etc). High temperature can damage and shorten the life of the battery pack. This may result in a cracked or leaking battery pack or the risk of fire. Prohibited Do not use a discolored, deformed or damaged battery pack in the phone. This may result in personal injury or the risk of fire. Disassembly Prohibited Do not open or mutilate the battery pack. Battery acid is corrosive and may cause burns or injury to skin or clothing. If battery acid is spilled, immediately flush the area with clean water to prevent injury. Compulsory Do not use a cracked, leaking or odor emitting battery pack near an open flame. Compulsory Do not leave or store the phone in areas where temperatures are more than 45 °C for a long period of time. High temperature can shorten the life of electronic devices, damage the battery pack, and warp or melt plastic parts. Prohibited The battery cord is color-coded, the red line is positive (anode), the black line is negative (cathode) and the yellow line is a sensor output. Compulsory

UT618 User Manual Handling the Charger Use only a power source that provides the appropriate voltage (AC220V±10% or AC110V±10%) for the charger. An unsuitable power source can result in damaging the charger, electric shock or the risk of fire. Compulsory Do not short circuit the charger connector jack. This may result in the risk of fire or electric shock. Prohibited Do not use the charger if the power supply cord or plug is damaged or frayed (exposed or broken wires, etc). This can result in the risk of fire or electric shock Prohibited Unplug the charger from the outlet before cleaning. Do not use liquid or aerosols cleaners. Use a damp cloth for cleaning to wipe off any accumulated dust to prevent any chance of fire. Compulsory Never spill any liquid on the charger. This may result in the risk of fire or electric shock. Prohibited Unplug the charger immediately from the wall outlet if liquid has been spilled into the unit to prevent the risk of fire or electric shock. Remove Power Plug Do not use the charger in areas with high humidity, such as bathrooms or the like. This may result in malfunction, electric shock or the risk of fire. Prohibited Do not touch the charger power cord or wall outlet with wet hands. This may result in the risk of fire or electric shock. Prohibited Always unplug the charger from the wall outlet before cleaning to avoid the risk of electric shock. Compulsory Do not place objects on the power cord. Install the charger where no one can step or trip on the power cord. Prohibited Always grip the power plug when removing charger from the wall outlet. Do not pull on power supply cord to avoid damage and the risk of electric shock. Compulsory

Table of Contents ix Phone Information Avoid extremely high or low temperatures. Always use the phone in an environment with a temperature range of 10°C~40°C and humidity range of 45%~95%. For maximum signal strength and noise free operation, use away from electrical appliances such as TV, radio or personal computer. Leaving the phone in hot or cold places such as a car will reduce the capacity and life of the battery. A phone with a hot or cold battery may temporarily not work even when the battery is fully charged. Battery Information Store the battery in a cool, well-ventilated area. Do not store in direct sunlight. If left unused a fully charged battery will discharge itself over time. If a fully discharge battery is stored for a long period of time, it may not be possible to recharge the battery. Do not discard old batteries with household trash. Where regulated, check with local waste management codes for disposal instructions. The Battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time is shorter than normal it time to replace the battery. Warning Information for FCC RF Exposure Compliance This PCS phone has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for General Population/Uncontrolled exposure environment. In addition, it complies with the following Standards and Guidelines: • FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio- Frequency Radiation. • FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. • ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. • ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and when the back of the phone faces your body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

UT618 User Manual Table of Contents 1. GETTING STARTED ............................................................................................................................................1-1 1.1 PACKAGE CONTENTS..........................................................................................................................................1-1 1.2 SPECIFICATION...................................................................................................................................................1-1 1.3 HANDSET DESCRIPTION .....................................................................................................................................1-3 1.4 SOFT KEY DESCRIPTION.....................................................................................................................................1-5 1.5 DISPLAY INDICATOR ..........................................................................................................................................1-6 1.5.1 Main Display Indicator .............................................................................................................................1-6 1.5.2 Sub Display Indicator................................................................................................................................1-9 1.6 HOW TO USE THE USER’S MANUAL.................................................................................................................1-10 1.6.1 Functional Key Instructions ....................................................................................................................1-10 1.6.2 Conventions in the manual......................................................................................................................1-10 1.6.3 Activity status on Opening / Closing the Flip Cover...............................................................................1-11 1.6.4 Timeouts and their effect.........................................................................................................................1-11 1.6.5 Returning to the Previous Screen............................................................................................................1-11 1.6.6 Returning to Standby Mode Screen .........................................................................................................1-11 1.6.7 Quick Browse ..........................................................................................................................................1-12 1.7 SCENARIOS WHERE THE PHONE CAN’T BE USED ...............................................................................................1-14 1.8 CHARGING THE BATTERY.................................................................................................................................1-15 1.8.1 Charging Instructions .............................................................................................................................1-15 1.8.2 Battery Life..............................................................................................................................................1-16 1.8.3 Replacing the Battery..............................................................................................................................1-17 1.9 CONNECTING THE PHONE HAND STRAP...........................................................................................................1-19 1.10 SERVICE ISSUES ...............................................................................................................................................1-20 2. LEARNING TO USE YOUR PHONE..................................................................................................................2-1 2.1 POWER ON / POWER OFF ...................................................................................................................................2-1 2.2 INTRODUCTION TO STANDBY MODE ..................................................................................................................2-1 2.3 FEATURE SELECTION METHODS.........................................................................................................................2-2 2.3.1 Selecting a Feature by Moving the Cursor................................................................................................2-3 2.3.2 Directly Entering the Feature Number......................................................................................................2-3 2.3.3 Table of Feature Numbers.........................................................................................................................2-3 2.4 MAKING A CALL ................................................................................................................................................2-5 2.5 DIALED NUMBER RECORD.................................................................................................................................2-7 2.5.1 Redialing a number / resending a short message......................................................................................2-7 2.5.2 Composing A New Message ......................................................................................................................2-8 2.5.3 Reading A Message ...................................................................................................................................2-8 2.5.4 Changing a Number ..................................................................................................................................2-9 2.5.5 Deleting Dialed Record Individually.........................................................................................................2-9 2.5.6 Deleting All Dialed Records......................................................................................................................2-9 2.6 ANSWERING AN INCOMING CALL.......................................................................................................................2-9 2.7 INCOMING CALL RECORD ................................................................................................................................2-10 2.7.1 Calling Back............................................................................................................................................2-11 2.7.2 Composing a New Message.....................................................................................................................2-12 2.7.3 Deleting Incoming Call Record Individually...........................................................................................2-12 2.7.4 Deleting All Incoming Record.................................................................................................................2-12 2.8 NUMBER MEMO...............................................................................................................................................2-12 2.9 ADJUSTING EARPIECE VOLUME .......................................................................................................................2-13 2.10 WHISPER MODE...............................................................................................................................................2-13 2.11 HOLDING A CALL.............................................................................................................................................2-14 2.12 THREE PARTY CALLING (NEEDS NETWORK SUPPORT) .....................................................................................2-14 2.12.1 Call Waiting ............................................................................................................................................2-14 2.12.2 Three Party Calling.................................................................................................................................2-15

Table of Contents xi 2.13 DISPLAYING CALLER ID (NEEDS NETWORK SUPPORT).....................................................................................2-15 2.14 REJECTING UNIDENTIFIED CALL......................................................................................................................2-16 2.15 SHOWING TALKING TIME.................................................................................................................................2-16 2.16 POWER SEARCHING..........................................................................................................................................2-16 3. SETTING UP YOUR PHONE (MAIN MENU)...................................................................................................3-1 3.1 KEY BEEP ..........................................................................................................................................................3-1 3.2 MANNER SETTING..............................................................................................................................................3-1 3.2.1 Manner Setting..........................................................................................................................................3-1 3.2.2 Setting/Canceling Manner Mode...............................................................................................................3-2 3.3 SETTING VIBRATOR ...........................................................................................................................................3-2 3.4 SETTING EARPHONE PICKUP ..............................................................................................................................3-3 3.5 MELODY SETTING..............................................................................................................................................3-3 3.5.1 Melody Select ............................................................................................................................................3-4 3.5.2 Searching Melody by Category .................................................................................................................3-5 3.5.3 Deleting Composed Melodies Individually- method 1...............................................................................3-5 3.5.4 Deleting all Composed Melodies-method 1...............................................................................................3-5 3.6 COMPOSING A MELODY .....................................................................................................................................3-6 3.6.1 Composing a New Melody.........................................................................................................................3-6 3.6.2 Modifying a Melody ..................................................................................................................................3-8 3.6.3 Resuming Melody Composition.................................................................................................................3-9 3.6.4 Deleting Composed Melody Individually- method 2 .................................................................................3-9 3.6.5 Deleting All Composed Melodies- method 2 .............................................................................................3-9 3.7 VOICE MEMO.....................................................................................................................................................3-9 3.7.1 Recording a Voice Memo ..........................................................................................................................3-9 3.7.2 Playing the Voice Memo..........................................................................................................................3-10 3.7.3 Deleting the Voice Memo ........................................................................................................................3-10 3.8 SETTING THE TIME...........................................................................................................................................3-11 3.9 SETTING AN ALARM.........................................................................................................................................3-11 3.9.1 Setting an Appointed Date.......................................................................................................................3-12 3.9.2 Setting an Appoint Day............................................................................................................................3-13 3.9.3 Stopping the Alarm Ring .........................................................................................................................3-13 3.10 SCHEDULE........................................................................................................................................................3-13 3.10.1 Setting a Schedule ...................................................................................................................................3-14 3.10.2 Searching a Schedule by Icon..................................................................................................................3-15 3.10.3 Modifying a Schedule..............................................................................................................................3-16 3.10.4 Deleting Schedule Individually................................................................................................................3-16 3.10.5 Deleting the Current Day Schedule.........................................................................................................3-17 3.10.6 Deleting All Past Schedules ....................................................................................................................3-17 3.10.7 Deleting All Schedules.............................................................................................................................3-18 3.11 CALENDAR.......................................................................................................................................................3-18 3.12 ANNIVERSARY .................................................................................................................................................3-19 3.12.1 Setting a New Anniversary ......................................................................................................................3-19 3.12.2 Changing an Anniversary........................................................................................................................3-20 3.12.3 Setting an Anniversary Display...............................................................................................................3-20 3.12.4 Deleting Anniversary Individually ..........................................................................................................3-21 3.12.5 Deleting All Anniversaries ......................................................................................................................3-21 3.13 SETTING THE SUB LCD....................................................................................................................................3-21 3.14 SETTING WALLPAPER ......................................................................................................................................3-22 3.14.1 Selecting Wallpaper ................................................................................................................................3-22 3.14.2 Deleting Pictures.....................................................................................................................................3-23 3.15 SETTING LCD CONTRAST................................................................................................................................3-23 3.15.1 Setting the Main Display Contrast ..........................................................................................................3-23 3.15.2 Setting the sub Display Contrast.............................................................................................................3-24 3.16 SETTING THE BACKLIGHT ................................................................................................................................3-24 3.17 SETTING A STANDBY MODE.............................................................................................................................3-24

UT618 User Manual 3.18 CALCULATOR...................................................................................................................................................3-25 3.19 LDS (NEEDS NETWORK SUPPORT)....................................................................................................................3-26 3.20 LTS (NEEDS NETWORK SUPPORT) ....................................................................................................................3-26 3.20.1 Setting LTS ..............................................................................................................................................3-26 3.20.2 Changing the LTS Password ...................................................................................................................3-27 3.21 SELECTING THE LANGUAGE.............................................................................................................................3-28 3.22 PHONE LOCK....................................................................................................................................................3-28 3.22.1 Setting Phone Lock..................................................................................................................................3-28 3.22.2 Canceling Phone Lock.............................................................................................................................3-28 3.23 CHANGING THE PHONE PASSWORD..................................................................................................................3-29 3.24 VOICE MAIL (NEEDS NETWORK SUPPORT)........................................................................................................3-29 3.24.1 Accessing Voice Mail ..............................................................................................................................3-30 3.24.2 Turning On/Off Voice Mail .....................................................................................................................3-30 3.24.3 Checking the Voice Mail setting..............................................................................................................3-30 3.24.4 New Voice Mail Reminder.......................................................................................................................3-30 3.25 YOUR OWN NUMBER.......................................................................................................................................3-31 3.25.1 Setting Own Number ...............................................................................................................................3-31 3.25.2 Displaying Own Number.........................................................................................................................3-31 3.26 TOLL LOCK......................................................................................................................................................3-31 3.26.1 Turning On Toll Lock..............................................................................................................................3-32 3.26.2 Turning Off Toll Lock..............................................................................................................................3-32 3.27 RESET ..............................................................................................................................................................3-32 3.28 ALL RESET.......................................................................................................................................................3-33 3.29 CUSTOM FUNCTION..........................................................................................................................................3-35 3.29.1 Setting Custom Function .........................................................................................................................3-35 3.29.2 How to Use Custom Function .................................................................................................................3-35 3.29.3 Deleting Custom Function Individually ..................................................................................................3-36 3.29.4 Deleting All Custom Functions ...............................................................................................................3-36 4. TEXT EDITION......................................................................................................................................................4-1 4.1 ENTERING TEXT.................................................................................................................................................4-1 4.1.1 Text Input Area..........................................................................................................................................4-1 4.1.2 Switching Input Method.............................................................................................................................4-2 4.1.3 Features Using Text Input.........................................................................................................................4-3 4.1.4 Entering numbers, characters and symbols ..............................................................................................4-3 4.1.5 Input Method .............................................................................................................................................4-4 4.1.6 Entering Chinese Character......................................................................................................................4-5 4.1.7 Entering English characters and Numbers ...............................................................................................4-6 4.1.8 Deleting Words and Sentences while Editing............................................................................................4-6 4.2 FUNCTIONS FOR EDITING ...................................................................................................................................4-6 4.2.1 Copying Text .............................................................................................................................................4-6 4.2.2 Cutting Text...............................................................................................................................................4-7 4.2.3 Pasting Text...............................................................................................................................................4-7 4.3 MARKS...............................................................................................................................................................4-8 4.3.1 Entering marks..........................................................................................................................................4-8 4.3.2 Mark List ...................................................................................................................................................4-8 4.4 EMOJI.................................................................................................................................................................4-9 4.4.1 Entering Emoji ..........................................................................................................................................4-9 4.4.2 Emoji List ................................................................................................................................................4-10 4.5 EDITING YOUR OWN MESSAGE (CANNED MSG).............................................................................................4-10 4.5.1 Editing a Canned MSG............................................................................................................................4-10 4.5.2 Saving Canned MSG while Editing .........................................................................................................4-11 4.5.3 Deleting Canned MSG Individually ........................................................................................................4-12 4.5.4 Deleting All Canned MSG.......................................................................................................................4-12 4.6 CANNED MSG .................................................................................................................................................4-12 4.6.1 How to use Canned MSG ........................................................................................................................4-12

Table of Contents xiii 4.7 DISPLAY MODE................................................................................................................................................4-13 4.7.1 Scrolling ..................................................................................................................................................4-13 5. PHONE BOOK........................................................................................................................................................5-1 5.1 EDITING A PHONE BOOK....................................................................................................................................5-1 5.1.1 Editing a New Phone Book........................................................................................................................5-1 5.1.2 Resume Editing the Phone Book................................................................................................................5-3 5.1.3 Modifying the Phone Book Contents .........................................................................................................5-3 5.1.4 Adding Data to the Phone Book................................................................................................................5-3 5.1.5 Saving a Dialed Number/Incoming Call Number into the Phone Book ....................................................5-4 5.1.6 Adding a Dialed Phone Number/Incoming Call into Phone Book............................................................5-4 5.1.7 Saving SMS Box Data to the Phone Book .................................................................................................5-4 5.2 DELETING PHONE BOOK ....................................................................................................................................5-5 5.2.1 Deleting Phone Book Individually.............................................................................................................5-5 5.2.2 Deleting All Phone Book...........................................................................................................................5-6 5.3 SEARCHING THE PHONE BOOK...........................................................................................................................5-6 5.3.1 Searching by Name Search........................................................................................................................5-6 5.3.2 Searching by Group ..................................................................................................................................5-7 5.4 DIALING FROM THE PHONE BOOK/EDITING NEW MESSAGE...............................................................................5-7 5.5 GROUPING PHONES............................................................................................................................................5-8 5.5.1 Grouping phone numbers..........................................................................................................................5-8 5.5.2 Modifying Group.......................................................................................................................................5-9 5.6 SECRET PHONE NUMBER....................................................................................................................................5-9 5.6.1 Setting a Secret Phone Number.................................................................................................................5-9 5.6.2 Dialing a Secret Phone Number..............................................................................................................5-10 5.7 FAVORITE CALL...............................................................................................................................................5-10 5.7.1 Setting Favorite Call ...............................................................................................................................5-10 5.7.2 Modifying Favorite Call..........................................................................................................................5-12 5.7.3 Deleting Individual Favorite Call ...........................................................................................................5-12 5.7.4 Deleting All Favorite Calls .....................................................................................................................5-12 5.7.5 Dialing From Favorite Call ....................................................................................................................5-13 5.7.6 Answering a Favorite Call ......................................................................................................................5-13 5.8 SETTING CALL BLOCK .....................................................................................................................................5-13 6. SHORT MESSAGE SERVICE (NEEDS NETWORK SUPPORT)...................................................................6-1 6.1 BRIEF INTRODUCTION TO SMS ..........................................................................................................................6-1 6.2 SENDING A MESSAGE.........................................................................................................................................6-1 6.2.1 Composing a New message .......................................................................................................................6-1 6.2.2 Resuming Composing a Message..............................................................................................................6-3 6.2.3 Reading/Forwarding a Message ...............................................................................................................6-3 6.3 COMPOSING AN ANIMATION MESSAGE..............................................................................................................6-4 6.3.1 Adding an animation/frame.......................................................................................................................6-4 6.3.2 Animation List ...........................................................................................................................................6-5 6.3.3 Frame List .................................................................................................................................................6-6 6.4 RECEIVING A MESSAGE......................................................................................................................................6-7 6.5 READING A MESSAGE ........................................................................................................................................6-7 6.6 REPLYING/FORWARDING A MESSAGE................................................................................................................6-8 6.7 SETTING/CANCELING SMS PROTECT.................................................................................................................6-9 6.8 DELETE SMS ...................................................................................................................................................6-10 6.8.1 Deleting Individual Messages .................................................................................................................6-10 6.8.2 Deleting All Messages in a Selected SMS Box- Method 1.......................................................................6-10 6.8.3 Deleting All Messages in a Selected SMS Box- Method 1.......................................................................6-11 6.8.4 Deleting All SMS Boxes...........................................................................................................................6-11 6.9 SETTING SENT BEEP.........................................................................................................................................6-12 7. E-MAIL (NEEDS NETWORK SUPPORT) .........................................................................................................7-1

UT618 User Manual 7.1 MIMI SETUP.......................................................................................................................................................7-1 7.1.1 Online Sign Up..........................................................................................................................................7-1 7.1.2 Changing/Resetting Center Number..........................................................................................................7-2 7.1.3 Sending Email Setting ...............................................................................................................................7-2 7.1.4 Receiving Email Setting.............................................................................................................................7-3 7.1.5 Signature (Sign).........................................................................................................................................7-3 7.1.6 Quote Text in Reply to an Email................................................................................................................7-3 7.2 SENDING AN EMAIL............................................................................................................................................7-4 7.2.1 Composing a New Email...........................................................................................................................7-4 7.2.2 Receiving Emails.......................................................................................................................................7-6 7.2.3 Resuming Composing an Email.................................................................................................................7-6 7.2.4 Reading/Forwarding an Email..................................................................................................................7-7 7.2.5 Saving an Email ........................................................................................................................................7-7 7.2.6 Sending Waiting-for-send emails ..............................................................................................................7-8 7.2.7 Attaching an Attachment ...........................................................................................................................7-8 7.2.8 Attaching Attachments from Mail Box ......................................................................................................7-9 7.3 RECEIVING AN EMAIL ........................................................................................................................................7-9 7.3.1 Receiving Emails Individually.................................................................................................................7-10 7.3.2 Receiving All Emails ...............................................................................................................................7-11 7.3.3 Auto Email...............................................................................................................................................7-12 7.3.4 Deleting Emails in the System.................................................................................................................7-14 7.4 MAIL BOX........................................................................................................................................................7-14 7.4.1 Reading Emails in In Box........................................................................................................................7-14 7.4.2 Reading Emails in Out Box .....................................................................................................................7-16 7.4.3 Reading Data in Air Info Log..................................................................................................................7-17 7.4.4 Checking the Details of the Mail.............................................................................................................7-17 7.5 ATTACHMENT ..................................................................................................................................................7-18 7.5.1 Viewing a Picture Attachment.................................................................................................................7-18 7.5.2 Saving Pictures You Received .................................................................................................................7-19 7.5.3 Playing Melody Attachment ....................................................................................................................7-20 7.5.4 Saving Downloaded Melody....................................................................................................................7-21 7.6 REPLYING/FORWARDING AN EMAIL.................................................................................................................7-21 7.6.1 Replying to an Email...............................................................................................................................7-21 7.6.2 Forwarding an Email..............................................................................................................................7-23 7.7 SETTING FREE BOX..........................................................................................................................................7-23 7.7.1 Rename Free Box ....................................................................................................................................7-23 7.7.2 Setting Auto Saving List ..........................................................................................................................7-24 7.7.3 Deleting Auto Saving List........................................................................................................................7-24 7.8 SEARCHING AN EMAIL .....................................................................................................................................7-25 7.8.1 Searching an Email by Date....................................................................................................................7-25 7.8.2 Searching an Email by Subject................................................................................................................7-26 7.8.3 Searching an Email by Address...............................................................................................................7-26 7.8.4 Searching Emails that are protected .......................................................................................................7-26 7.9 TRANSFERRING AN EMAIL BETWEEN MAIL BOX..............................................................................................7-27 7.10 SETTING/CANCELING EMAIL PROTECTION.......................................................................................................7-27 7.11 DELETING EMAILS ...........................................................................................................................................7-28 7.11.1 Deleting Emails Individually...................................................................................................................7-28 7.11.2 Deleting All Emails In a Designated Mailbox- Method 1 .......................................................................7-28 7.11.3 Deleting All Emails In a Designated Mailbox- Method 2 .......................................................................7-29 7.11.4 Deleting All Mailboxes............................................................................................................................7-29 8. BOOKMARK..........................................................................................................................................................8-1 8.1 CREATING A BOOKMARK...................................................................................................................................8-1 8.1.1 Creating a New Bookmark ........................................................................................................................8-1 8.1.2 Resuming Editing the Bookmark ...............................................................................................................8-2 8.1.3 Revising a Bookmark.................................................................................................................................8-2

Table of Contents xv 8.1.4 Saving Bookmark From Air Info ...............................................................................................................8-2 8.1.5 Saving Air Info Address From Mailbox.....................................................................................................8-3 8.2 DELETING A BOOKMARK ...................................................................................................................................8-3 8.2.1 Deleting Bookmarks Individually..............................................................................................................8-3 8.2.2 Deleting All Bookmarks.............................................................................................................................8-4 8.2.3 Resetting Bookmark...................................................................................................................................8-4 8.3 SEARCHING A BOOKMARK.................................................................................................................................8-5 9. AIR INFO (NEEDS NETWORK SUPPORT)......................................................................................................9-1 9.1 AIR INFO TEXT...................................................................................................................................................9-1 9.2 CONNECTING FROM MIMI EXPRESS ..................................................................................................................9-1 9.3 CONNECTING FROM AIR INFO LOG ....................................................................................................................9-3 9.4 CONNECTING FROM MY FAVORITE....................................................................................................................9-4 9.5 DISPLAYING THE HEADER OF AIR INFO..............................................................................................................9-4 9.6 SAVING AIR INFO DATA ONLINE........................................................................................................................9-5 9.7 READING AIR INFO OFFLINE ..............................................................................................................................9-6 10. GROUP ..............................................................................................................................................................10-1 10.1 SETTING A GROUP............................................................................................................................................10-1 10.1.1 Setting the Master Phone ........................................................................................................................10-1 10.1.2 Setting the Slave Phone...........................................................................................................................10-2 10.2 DELETING A GROUP .........................................................................................................................................10-2 10.3 COMMUNICATION ............................................................................................................................................10-3 10.3.1 Dialing.....................................................................................................................................................10-3 10.3.2 Answering................................................................................................................................................10-3 10.4 TRANSFERRING A PHONE BOOK.......................................................................................................................10-4 10.4.1 Transferring select Phone Book data......................................................................................................10-4 10.4.2 Transferring All Phone Book Data..........................................................................................................10-5 10.5 TRANSFERRING BOOKMARKS...........................................................................................................................10-6 10.5.1 Transferring a selected Bookmark ..........................................................................................................10-6 10.5.2 Transferring All Bookmarks....................................................................................................................10-7 10.6 RECEIVING PHONE BOOK/BOOKMARK.............................................................................................................10-7 11. DATA COMMUNICATION............................................................................................................................11-1 11.1 DATA COMMUNICATION PROCEDURE (NEEDS NETWORK SUPPORT) ...............................................................11-1 12. MAINTENANCE & TROUBLESHOOTING................................................................................................12-1 12.1 PHONE MAINTENANCE.....................................................................................................................................12-1 12.2 TROUBLESHOOTING .........................................................................................................................................12-1 13. INDEX................................................................................................................................................................13-1

1.1 Package contents Please check the package contents by comparing them with the following list. In case there are missing items or product defects, please contact your local phone dealer. • Main unit (UT618 phone) and Lithium Ni-MH battery • Battery charger • Hand strap • Instruction Manual • After service guide • Warranty certificate • QuickStart guide for UT618 1.2 Specification Dimension (width x length x height) About 45mm x 83mm x 23.5mm Weight About 85g Battery 3.6V, 580mAh lithium battery Transmission voltage About 10mW (average) Battery charger Input: 100-240VAC, 50-60HZ Output: 5.2VCD, 320mA Weight of the battery charger About 50g Time for charging the battery 2.5-3.5 hours Standby time in public mode 48-200 hours Product Specifications

UT618 User Manual � � � �Note: The length of standby time the battery can supply power is determined by the telephone usage. The following actions or situations can consume more power and reduce the standby time. • Migration to areas where signal strength is weak. • Moving through the service area. • Talking on the phone for long periods of time. • Ringing volume is set to the maximum. • Earpiece volume is set to the maximum. • Leaving the phone in hot or cold places such as a car will reduce the capacity and life of the battery. A phone with a hot or cold battery may temporarily not work even when the battery is fully charged. • Repeated changing of phone parameters. (i.e. Adding or deleting entries to/from the phonebook feature) and usage of phone features viz. Phone book, SMS, Mail, Alarm etc. • “Back light” being ON consumes more power. • Repeated closing and opening of the flip cover. • Pressing and holding to search the network

Getting Started 1-3 1.3 Handset Description 1. Fixed antenna: The antenna cannot to be extended. Any attempt to pull out the antenna may damage the handset and antenna. 2. Sub display: The Sub display flashes when there is any incoming call, message, Email or alarm. The Sub display supports three-color settings - red, green and orange. The red light is turned on when the battery is being charged. 3. Speaker: Plays back ringing, warning and keypad beeps. 4. Slot for the hand strap 5. Battery cover 6. Charging connector 7. Earpiece 8. Main display

UT618 User Manual 9. key: This key is used to enter a Custom Function, search the network and to return back to the previous screen. 10. key: This key is used for accessing the Main menu, Manner Setting or Sub-LCD Setting and save edited data or block incoming calls. 11. (Ok) key: Along with the confirmation option (Okay) this key is used for entering the OK menu, which caters to various functions 12. (Functional) key: This key has multiple functions. On its own, the four sides of the key represent various functions viz. browse and enter Dialed Record, Incoming Record, Phone Book, Book Mark. It is also used for moving the cursor. 13. (@/Flash/English/Chinese) key: This key is used to enter the MiMi Express menu, which caters to enter Air Info record, my Favorite etc. 14. (CLR/HOLD/group) key: This key is used to delete phone number/text/data and hold a call. 15. key: This is the off-hook key to dial and answer incoming calls. 16. (Power/End) key: This key is used to power on and off, hang up, cancel an operation or return to standby mode. 17. (Number/Text) key: Used to enter telephone numbers, text or for selecting functions.

Getting Started 1-5 18. (*) key: This key is used as a carriage return key and also for selecting tones when inputting Chinese data. 19. (#) key: This key is used display the sub-menu when editing text. 20. Microphone 21. Earphone jack: To connect the earphone 22. Data communication slot cover 1.4 Soft Key Description , , and are keys located on the upper half of the keypad that can be used to select the functions on the last line of the display. However, please be aware the keys and the corresponding functions on the display are not aligned exactly. E.g. 10/03 23:20 Re:GoodMor Out BOX Hello! 1/10 Appointment 10/10 10:00 10/05 11:30

UT618 User Manual • If the first icon in the last line of the display indicates , it means you can press to select the function; if the second icon is , it means you can press to select the function; if the third icon is (or , , , etc.,) it means you can press to select the function; if the forth icon indicates (or etc.,) it indicates you can press to select the function; 1.5 Display Indicator 1.5.1 Main Display Indicator 1. Service Indicator: When a call is in progress this icon is displayed to show the off-hook status. The phone is in standby status when this icon is not displayed.

Getting Started 1-7 2. Signal Strength: Indicates the current signal strength. When the phone is in a service area lines are displayed to signify signal strength. More lines mean better signal strength. Signal strength is symbolized as follows and it also indicates whether the phone is in public mode or public/group mode. Strong Weak 3. Mode of operation : This icon displays the public mode of operation and it indicates that the phone is in service area. The indicator will flash when dialing under public mode or when you have an incoming call. 4. Out of service area: This icon indicates that the phone is out of service area and you cannot dial out or answer a call. 5. Group Mode: Indicates that the user is in a public/group mode or transfer mode 6. Battery Power: Indicates the remaining battery power level. There four levels: - Full - Medium - Low - Very low 7. Charging Status: This symbol indicates the charging status. 8. Message Indicator:

UT618 User Manual This symbol indicates a new short message. The right side indicates the numbers of unread messages. When the messages are less than 9, it displays a number; when they are over 10, it is displayed as . 9. Email Indication: This symbol indicates an unread email. The right side indicates the number of unread emails. A number is displayed when the emails are less than 9; when they are over 10, it is displayed as . 10. Ringing Indicates an unanswered incoming call. 11. Keypad Lock: Indicates the keypad is locked. 12. Toll Lock: Indicates Toll lock has been enabled. 13. Manner Mode: Indicates manner mode has been activated. 14. Ringer Indication: Indicates incoming call ringer is turned off 15. Vibrator Indication: Indicates incoming call vibrator is on 16. Alarm: Indicates the Alarm is activated. 17. LDS /LTS: Indicates LDS or LTS is activated. 18. Display area: This is the area where all the operations and activities are displayed.

Getting Started 1-9 � � � � Note: • Battery level is an indicator. The number of the bars may change under different environmental conditions. • If the standby screen displays “Please Charge”, it means that the battery has run out of power and it needs to be recharged immediately. Under such circumstance no keys work except . 1.5.2 Sub Display Indicator. This phone comes with an additional sub display on the phone flip cover. Even if you close the flip you can still know the standby mode, incoming call mode and the caller. The various modes are illustrated as below: 1. Modes of standby mode: Standby mode Low battery Unanswered Incoming call 10/10 Fri. 10:00 Please Charge Missed Call New SMS New mail Charging You Got SMS 1 You Got E-Mail 1 Charging 2. Real Time Events: • Incoming call (if the phone number is saved in phone book) Call From: Michael Yang • Incoming call (if the phone number is not saved in phone book or is saved in the secret phone book) Call From: 07012345678 • Receive SMS You Got SMS

UT618 User Manual • Receive mail You got E-mail • Alarm 10/10 Fri.10:00 Alarm • Schedule (the second line indicates the first 16 bytes of the information) 08/09 Fri. 19:00 [Max 16bytes] • Group incoming call Group 1 No.0001 • Data Communication Data Comm. 1.6 How to Use the User’s Manual 1.6.1 Functional Key Instructions Press functional keys “Up”, “Down”, “Left”, “Right” to select “search, select, adjust, setting” etc. The directions of the functional keys are as following: Up Down Up or Down Right Left Right or Left 1.6.2 Conventions in the manual In this manual, “Press * key” means pressing * key and releasing it immediately. “Press and hold * key” or “hold * key” mean pressing * key for more than 2 seconds before releasing it.

Getting Started 1-11 1.6.3 Activity status on Opening / Closing the Flip Cover Status Opening the flip Closing the flip Incoming call If automatic answer is not set then Press to answer a call. Incoming ring will be switched off but the phone will still remain in but the phone is still in incoming call mode Talking End call Sending or receiving mails, message, air info, online registration etc. Connection end Automatically receive mail, data communication Will remain still connected 1.6.4 Timeouts and their effect ‘Timeout’ means that if any key is not pressed within a certain time, the phone will automatically return to either the standby mode wallpaper or connecting screen. Password screen will automatically return to wallpaper if there is a timeout. Also, the phone will automatically return to standby mode wallpaper after a while if alert information is displayed. The timeout duration is about 60 seconds and then the display returns to wallpaper or connecting screen. � � � � Note When any operation is complete, please press to return to standby mode screen. Constantly displaying an operational screen will consume more battery power. 1.6.5 Returning to the Previous Screen Press to return to the previous screen. 1.6.6 Returning to Standby Mode Screen Press to return to standby mode screen.

UT618 User Manual 1.6.7 Quick Browse In the main menu or list screen, you can browse features quickly by pressing and holding to any direction. • Press and hold to the right. Browse to bottom-right menu and the cursor will return to the upper-left menu again. Main Menu • Press and hold to the left. Browse to upper-left menu and the cursor will return to the bottom-right menu again. Main Menu • Press and hold on top. Browse to upper-left menu and the cursor will return to the bottom-right menu again.

Getting Started 1-13 Main Menu • Press and hold downwards Browse to bottom-right menu and the cursor will return to the upper-left menu again. Main Menu • List screen The Christm No Scrub Boombustic 4/29 Can't help fa I try Fly me to the Melody List Displays next six data. Display previous six data. Up Down

UT618 User Manual � � � � Note If the data is less than six, does not work. 1.7 Scenarios where the phone can’t be used 03/15 Fri. 1 0 3:0 • Reason: (Public mode) the user is out of the service area. • Solution: Please move to a service area or a place with stronger signal reception. Weak Signal! 00:00:02 • Reason: If the phone is under “public mode” and moves to a weak signal area, the icon flashes and “Weak Signal” warning information is displayed. • Solution: Please move to a place with stronger signal reception. 02/14 Fri. 10:00 • Reason: “Phone Lock” is on. • Solution: Please unlock the “Phone Lock”.

Getting Started 1-15 Please Charge • Reason: If the battery is low under standby mode, the display indicates “Please Charge” and sounds a warning beep. • Solution: Please charge. Please Charge 00:00:20 • Reason: Warning beep sounds when the phone is in use, which means there is only one minute talk time remaining. “Please Charge” will be displayed on the main displayed. • Solution: Please charge. � � � � Notice: • When the phone is in receiving/sending mail and Air Info connecting mode and if the signal is too weak or the battery is low, icon will flash, but it will not sound a warning beep. • If the display indicates “Please Charge”, it is recommended to recharge the phone for 5-10 minutes before using it. 1.8 Charging the battery 1.8.1 Charging Instructions 1. Plug the charger into an AC100-240V electrical outlet.

UT618 User Manual 2. Plug the charger into the charging connector of the phone. • During charging, the red light will be illuminated. • It takes 2.5-3.5 hours to charge. (Exact time may vary depending on circumstances) • If the phone is turned on during charging, you can still answer incoming calls, but this will consume battery power thus extend the charging time. • The battery can be recharged even if the phone is connected to the Internet or the earphone is plugged in. 3. Switching off of the Sub-LCD light indicates that the charging is complete. Sub-LCD light status during charging Main Display Charging status On Charging icon light Charging Flash - Abnormal Indicates the charger is not correctly plugged in the phone. Please reinsert it. If the Sub LCD light still flashes, it indicates the battery or the charger has problems. (Power on) light on Off It does not display when power off Charge completed 1.8.2 Battery Life • The actual battery life varies according to a number of factors. Some of them are listed herewith. • Continuous standby time is defined as the time during which the phone does not make or receive any call or perform any operation. The continuous standby time of the phone is around 48-200 hours. • Actual battery life is determined by “standby time” and “talk time”. The longer the talk time, the shorter is the standby time. • If the phone is used in areas with weak signals, at low or high temperature or out of service area, it may consume more battery power. • Entering text over an extended period or time, for example: editing phone book, editing mail, connecting to the Internet and Air Info will consume more battery power. 100-240V AC Outlet

Getting Started 1-17 • If the flip is open, it consumes more battery power. • At high or low temperature, battery power consumption will increase. The battery life will decrease at low temperature however the performance will increase once it is back to normal temperature. � � � � Note: • During charging, the charger or the phone may become hot. This is normal. There is no reason for concern. • If it interferes with TV or radio reception during charging, please move the charger to a different electrical outlet, and move the phone to a place away from TV, radio and other electronic appliances with antenna. • Please charge the battery for 2.5-3.5 hours before you use it for the first time or if the phone has not been used for a long time. • If the phone is connected to the charger again after it has been charged fully, the sub LCD will be switched ON for a short period after which it will go OFF. • Please note the number of bars in display and recharge or replace the battery as instructed. • Charging and discharging the battery repeatedly will decrease battery life. If usage time decreases by half or more, please replace the battery with a new one. • If the battery is fully charged and phone is not used or switched off for extended period of time, battery life will decrease and the battery may discharge fully. 1.8.3 Replacing the Battery When the usage time decreases by half or more it’s time to replace the battery. Except for replacing the battery or any kind of emergency please do not remove the battery. 1. Press and hold to turn off the phone. 2. Remove the battery cover: Press the upper middle side of the cover with your thumb and slide it downwards, then remove it.

UT618 User Manual 3. Pull out the battery, but make sure not to pull the connector lead directly. After the battery is out pull the connecter gently. Please make sure you remember the way in which the connecter was connected ( Polarity). 4. Install a new battery and route the battery cable between the battery and the phone body. � � � � Note: Make sure the connector is connected with the right polarity and fitted firmly. Please do not use excessive force. 5. Attach the battery cover firmly.

Getting Started 1-19 � � � � Note: The red lead of the battery is the positive terminal (anode) and the black lead is the negative terminal (cathode). � � � � Caution: Before using the phone for the first time, please charge the battery for 2.5-3.5 hours. After removing the battery, the following data will be lost: 1. Data in mailbox 2. Air Info data 3. Dialed number record, number memo, incoming call record 4. Copied and cut text After removing the battery, the following data will be set back to its default original settings: 1. Time setting 2. Display setting of mail � � � � Note: Please remember to backup important data. 1.9 Connecting the Phone Hand Strap 1. Pass the thin end of the hand strap through the hand strap slot. Pull it out at the other end.

UT618 User Manual 2. Pass the other end of the hand strap through the thin thread and push the thin thread to the bottom. 1.10 Service Issues • This PAS phone cannot be used out of the service area. When the phone is in the service area, it displays indicator. • When the call cannot be connected or the signal drops within the service area, please move to an area where signal level is stronger. • When the phone is used in the shadow of a building or near a metal door or electronic appliances, the signal may decrease, and may hinder the clarity of the communication. • If you press any key but none of them work, please remove the battery and put it back a minute later (refer to Page 1-18 for battery installation) and redo the prior operation. Please note that when the battery is removed, some data may be lost and settings reset to default values. Please refer to the “Caution” on Page 1-19.

2. Learning to Use Your Phone 2.1 Power On / Power Off When you use the phone for the first time or if the phone has not been used for an extended period of time, make sure the phone is charged for 2.5-3.5 hours before using it. The phone can be turned on or off by pressing and holding the key. When the phone is turned on, it will beep and the display and backlit keys will be turned on. During the process of power on / power off, the display will show animated graphics. 2.2 Introduction to Standby Mode • This phone comes with four standby modes. "Public" standby mode works within the service area of the system and does not require special settings. Refer to "Setting Standby Mode" for details on how to set other standby modes. If the standby mode is "Public" but you are outside the service area of the system, the phone will display “ ” image and PAS services will not be available. 1. Public Mode: you can use all PAS services within the service area. 1 0 3:0 02/14 Fri. 2. Group Mode: When the phone's group functions are activated, the phone can be used as an intercom phone.

UT618 User Manual Group 1 3:00 02/14 Fri. 3. Public/Group Mode: You can use all functions available in Public Mode and Group Mode. Group 1 0 3:0 02/14 Fri. 4. Transfer Mode: Phone book entries and bookmarks can be transferred among the phones with Group Mode set. Transfer 1 3:00 02/14 Fri. 2.3 Feature Selection Methods • This phone provides two methods of selecting phone features: 1. Move the cursor to the desired feature in the main menu and press 2. Directly enter the function number � � � � Note: This manual illustrates the second method, but the user can use the first method as well.

Learning to use your phone 2-3 2.3.1 Selecting a Feature by Moving the Cursor • Press to enter the "Main Menu". • To enter "OK menu”, press at standby display. • Press key to select the desired feature. • The size of the image of the selected feature will change and the description of the feature and an outside frame appears. • Press to enter the selected feature's sub-menu. • Press key to show the next group of features; press key to show the previous group of features. • Press to select a function and then press to show the selected feature screen. � � � � Note: Press and hold key to gain quick access to the main menu. 2.3.2 Directly Entering the Feature Number 1. Press key to enter "Main Menu". 2. To enter "OK Menu", press at standby screen. 3. Use numeric keys to enter the feature number. The picture of the selected feature is displayed. 2.3.3 Table of Feature Numbers 2.3.3.1 Main Menu (directly entering feature numbers) Features Operations Own Number Call/Vibrator Earpiece volume Whisper Key beep Manner setting Vibrator Earphone pickup

UT618 User Manual Features Operations Melody setting Melody select Melody compose Voice memo Time manager Time Date Alarm Schedule Calendar Anniversary Sub LCD Screen/LCD Wallpaper LCD contrast Backlight Talking time Standby mode Group mode Group setting Delete Group Transfer Special Calculator LDS LTS Canned MSG Language Security Caller ID No ID Block Phone lock Password Voice mail Change own number Reset Toll lock

Learning to use your phone 2-5 Features Operations All reset 2.3.3.2 Ok Menu Features Operations Air Info SMS New Retrieve Editing Data SMS BOX Receive Email Send Email New Retrieve Send All Editing Data Mail Box MiMi Setup Online Sign Up Center Number Email Setting Sign Quote Sent Beep Air Info Text 2.4 Making a Call 1. Standby mode must be set to Public Mode or Public/Group Mode before making a call.

UT618 User Manual 2. Refer to "Set Up Standby Mode" for details on how to set up standby mode. 3. Calls can be established successfully only when there is sufficient signal strength. 4. Key in the phone number of the party you want to call, the number will be displayed on the screen. 5. You can also press key to enter the phone book to search the number then dial the number. 6. If you make an error, press key to erase the last number. Press and hold key to clear all digits then return to standby screen. 7. You can press key to store the phone number into the phone book. Refer to "Creating New Phone Book" for details. Two-Stage Dialing: 8. Key in the phone number press key ("P" will be displayed after the phone number) key in the extension number. 9. Press key the phone will dial the number before "P" press again the phone will dial the number after "P" � � � � Note: When you want to dial an extension in an office, you can use this method to speed up dialing. But this function depends on the other end's PBX type. For certain type of PBXs, this function may not work. 10. Press key to dial. 11. When you are connected, the screen displays "In Use". If "Talking Time" is turned on, length of the call is displayed. When the call is in progress the following functions can be accessed by the help of the navigation key as shown below: - Adjust the earpiece volume - Number memo - Search phone book 12. Press to terminate the call. "End Call" is displayed when the call is terminated.

Learning to use your phone 2-7 � � � � Note: • You can also press first, then dial. But this will cause a few seconds delay between end of dialing and sending out the signal. • In step 4 if you type in 32 numbers, you will not be able to press to search the phone book. • You cannot dial when you are not in the service area. • If the phone's "Toll Lock" is turned on, and you attempt to dial a long distance number the screen will display "Toll Lock”. 2.5 Dialed Number Record • Phone numbers that are already dialed previously, short messages, number memo, and automatically received emails will be recorded in "Dialed Record", with a maximum total of 20 records. (There can be only 1 automatically received email; new email will replace the previously saved one). If there are more than 20 records, the old ones will be replaced by the new ones. 2.5.1 Redialing a number / resending a short message 2. Press to show the latest dialed number. • If there is no dialed number, it will show "No Record" 3. Press to select the phone number to call or to send short message. : Display dialed number with the oldest date : Display dialed number with the recent date • If the oldest dialed number is displayed, pressing will return to the most recent dialed number. 3. Press to dial the selected number • If you select a number that was used for sending a short message, redialing the number will send the same message. 4. Press to terminate the call. • It is not necessary to press when resending short messages. � � � � Note: • Numbers saved as Number Memo are saved as Dialed Record. A total of 20 numbers can be saved.

UT618 User Manual • Press to switch between Dialed Record and Detailed Record. • Icon description: phone call, short message, auto received email. • When email is set to auto receive, auto received email will be recorded but cannot be redialed. • If a dialed number is a number in the secret phone book, only the phone number will be shown. • Press to show the sub menu 1. Dial: Will dial the number 2. New SMS: Will create a new message 3. Check SMS: Read the message but cannot be edited. If a non- message number is selected, this menu item will be grayed out and cannot be selected. 4. Each phone record can hold three phone numbers. If a dialed number's record in the phone book has additional numbers, those numbers can also been shown. Using the numeric key to select it will automatically dial the number. If the dialed number is not in the phone book or the record in the phone book contains no additional phone numbers, it will display "No number" (grayed out and cannot be selected). • To call a number that was used for message, press , and the sub menu will be displayed. Press to dial. 2.5.2 Composing A New Message 1. Select a number from the Dialed Record to create a new message 2. Press to show the sub menu 3. Press to select "New SMS" to enter "SMS" input screen. 4. Follow operations after Step 2 in "Composing a New Message" in Chapter 6. 2.5.3 Reading A Message 1. Select the message to be viewed from the Dialed Record 2. Press to show the sub menu

Learning to use your phone 2-9 • If the number selected is not a message, "Check SMS" is grayed out and cannot be selected. 3. Press to select " Check SMS ". The content of the message is displayed. � � � � Note: • If the message in Out Box has been deleted, then it cannot be displayed in the dialed record. However, the number itself is still saved. • Messages can only be read but not edited from Dialed Record. 2.5.4 Changing a Number 1. Select the number to be changed from Dialed record. 2. Press to show the sub menu 3. Press to select "Change No." • Press to delete digits one by one then using the numeric keys enter the new phone number. 4. Press to dial the revised number. 2.5.5 Deleting Dialed Record Individually 1. Select the number to be deleted from the dialed record list. 2. Press to show the sub menu. 3. Press to select "Delete One", when the number is deleted "Deleted" will be displayed. 2.5.6 Deleting All Dialed Records 1. Display dialed record 2. Press to show the sub menu 3. Press to select "Delete All", "Delete All?" is displayed. 4. Select "Yes" Press , when all the numbers are deleted "Deleted " is displayed. 2.6 Answering an Incoming Call 1. When a call is received, the screen will flash "Call From:" information.

UT618 User Manual • When a call is received, the phone will ring, and the Sub LCD will flash (if the phone flip is already open, the Sub LCD will not flash.) • To stop ringing / vibration, press . If a call is received when the flip is open, ringing / vibrator can be stopped by closing the flip. The call is not disconnected. • The phone will also show caller’s number if the caller ID service is subscribed. • If the number has been entered in the phone book, then the caller’s name will also be displayed. If the number is in the secret phone book, only the phone number will be shown. • Pressing will reject the call. 2. Press to answer the call. "In Use" will be displayed and if "Talking Time" function is activated, it will also show the length of the call. While in conversation the navigation key can be used to accomplish the following functions : adjust Earpiece volume : Number memo : Search phone book 3. Press to terminate the call. When the call is terminated "End Call " will be displayed. � � � � Note: • When the flip is opened, the ringer volume of incoming call will gradually increase to the set level. But if the incoming call ringer is set to off or Manner mode is set to on and its volume is turned off, incoming call volume is turned off. • Upto 15 digits can be displayed for an incoming call. • If you open the flip when there is an incoming call, the Sub LCD will stop flashing and the backlight will be turned on. If you close the flip, the Sub LCD will flash again but ringing/vibration will stop. 2.7 Incoming Call Record • Record the phone number, date, and time of incoming calls and short messages.

Learning to use your phone 2-11 2.7.1 Calling Back 1. Press to show the most recent incoming call record. • Incoming call record will show date, time, and whether the call has been answered. Indicates the call has been answered, including received short messages. Indicates the call has not been answered. 2. Use to select the phone number : Switch between ‘list view’ of all incoming calls and ‘detail view’ of calls : Show incoming calls with oldest date : Show incoming calls with most recent date • If the oldest incoming call is being displayed, pressing will return to the most recent incoming call record. 3. Press to dial the selected number. � � � � Note: • If you do not subscribe to caller ID service, the phone number in incoming call will be displayed as "---" • If the date and the time in the phone have been set, incoming call will show date and time of the call. Refer to section on “ Setting the time” on how to set date and time. • If the number of the call is already in the phone book, it will also display the caller's name. However, if the number is saved in the secret phone book, only the number will be displayed. • When incoming call records exceed 20, new records will replace old ones. • If there are unanswered calls, standby screen will show "Missed Call" and • Pressing will display the sub menu 1. Dial: Will dial the number 2. New SMS: Create a new message 3. Each phone record can hold three (3) phone numbers. If the incoming call number's record in the phone book has additional numbers, those numbers can also been shown. Using the numeric key to select it, will automatically dial the number. If the incoming call number is not in the phone book or the record in the phone book contains no additional phone numbers, it will display "No Number" (grayed out and cannot be selected).

UT618 User Manual 2.7.2 Composing a New Message 1. Select a number from incoming call records to create a new short message. 2. Press to display the sub menu. 3. Press to select " New SMS" and enter "SMS" editing screen. 4. Refer to operations after Step 2 in "Composing a New Message" in Chapter 6. 2.7.3 Deleting Incoming Call Record Individually 1. Select the record to be deleted. 2. Press to display the sub menu. 3. Press to select "Delete One". Deletion is completed when "Deleted" is displayed. 2.7.4 Deleting All Incoming Record 1. Display incoming call records 2. Press to display sub menu 3. Press to select "Delete All", "Delete All?" is displayed. 4. Select "Yes" press . When all the records are deleted “Deleted” will appear. 2.8 Number Memo 1. Press during a call. "Number Memo" screen is displayed. 2. Enter numbers • You may use all numeric keys, , , and . • Pressing will delete one digit; pressing and holding will delete all digits. 3. Press , when the number has been saved "Registered" will be displayed. � � � � Note: • In Group mode, you cannot save a number during a call. • Maximum number of digits that can be saved is 32. • When the call is completed, the number will be saved in the Dialed Record.

Learning to use your phone 2-13 • There can be a maximum of 20 dialed number and saved numbers. When the numbers of record exceed 20, the new record will replace the old ones. The oldest one will be replaced first. • While entering the numbers, pressing will terminate the call, but the number memo will still be saved into Dialed Record. • To display number memo, follow operations of Dialed Record. 2.9 Adjusting Earpiece Volume • There are five levels of volume to choose from. The default setting is 2. • The volume setting will not change when the phone is powered off. 1. Press to display the "Earpiece Volume" screen appears with the current volume setting. 2. Press to adjust Earpiece volume. • Pressing once, the volume will increase to the next level • Pressing once, the volume will decrease to the next level 3. Press . When "Earpiece Volume" has been set, "Set" is displayed. � � � � Note: • If you want to adjust volume during a call, you can press . The Earpiece volume will be set to the new value. 2.10 Whisper Mode • The whisper mode allows the other party to hear you clearly even if you speak in low voice in a noisy environment or in a meeting. • The default setting for whisper mode is OFF. 1. Press . "Call/Vibrator" menu appears. 2. Press to switch "Whisper" from "OFF" to "ON". � � � � Note: • To turn off "Whisper" function, repeat Steps 1-2 and turn "Whisper" from "ON" to "OFF" • After Step 1, you can move the cursor to " Whisper" menu item and press to switch “Whisper” "ON"/"OFF".

UT618 User Manual • During a call, you can press to enter " Whisper" mode if " Whisper" mode is not turned on, and press to turn off " Whisper" mode if " Whisper" mode is turned on. When the call is completed, it will return to its original setting. 2.11 Holding a Call • This phone comes with the call holding function. The other party will hear the call hold sound. 1. Press during the conversation. The other party will hear the call hold sound and "On Hold" will be displayed on the screen. 2. To return to the conversation, please press again. You can also press to return to conversation. � � � � Note: • You will still be charged when the call is being held. • Call holding sound is only available when the phone is set to Public Mode 2.12 Three Party Calling (Needs network support) • You need to subscribe to this service from your service provider in order to use Call Waiting and three party calling. Specific operation details depend on your service provider's network. If you need help, please contact your service provider. 2.12.1 Call Waiting • This feature is used to hold the current call and answer another call. 1. While you are on a call and have another incoming call. 2. Press to hold the current conversation and answer the other call. Press to switch between the callers. � � � � Note: • If you want to terminate the current call when the next call come in, press . • If you do not want to answer the other call, press . This will reject the call.

Learning to use your phone 2-15 2.12.2 Three Party Calling • This feature allows you to call another person while you are in a call to initiate a three party conversation. • Example: A and B are having a conversation and they need C to join them. Assume A as the initiator. 1. Press while in the call, A will hear continuing beeping that indicates he can now enter the phone number of C. 2. Enter the phone number and phone will dial the number automatically. 3. Press to start three party conversation. � � � � Note: • To return to normal two party conversation, A needs to press , each time A presses he will toggle between the two calling parties. • To terminate both conversations, A needs to press . • During a three party call, B and C both will have call waiting function, but for A as both lines are busy, there will not be any call waiting. 2.13 Displaying Caller ID (Needs network support) • The caller can choose whether to have his phone number identified by the other party. • This feature needs network support. 1. Press to display the "Caller ID" menu 2. Press to turn it ON 3. Press to dial the system • Once the system's voice response is complete, press to terminate the call and return to standby screen. � � � � Note: • To turn off Caller ID function, select "OFF" in step 2. Press to call the system to turn off this function. • Using Air Info or short message cannot turn off this function. The system will send out the phone's number instead. • Turning on/off this function requires you to call the system. If you cannot connect to the system and hear the system's voice message after you attempted to turn on/off this function, it indicates the operation was not successful.

UT618 User Manual 2.14 Rejecting Unidentified Call • If you subscribe to caller ID service, you can turn on this function to reject unidentified calls. If you don't subscribe to caller ID, please turn off this function. Otherwise, it will reject all calls. The default setting is "OFF". 1. Press . "Security" menu appears. 2. Press to turn " No ID Block " from "OFF" to "ON" � � � � Note: • Unidentified short messages cannot be rejected. • Call Block is only available in Public Mode. • When a caller uses unidentified number calling function to call a phone with " No ID Block" function turned on, the call will be rejected directly. The phone will not ring or vibrate. " No ID Block MSG, Playing" will be displayed on the screen. 2.15 Showing Talking Time • If the Talking Time function is activated, call length will be displayed during the call. The default setting is "ON". 1. Press to display "Screen LCD" . 2. Press . "Talking Time" changes from "OFF" to "ON". � � � � Note: • After Step 1, you may move the cursor to "Talking Time" then press to toggle between ON/OFF. • Talking Time is only for reference and cannot be used as evidence of service charges. 2.16 Power Searching • You can search for high power if the signal is weak while in a call or in standby mode. You can also do this when you are outside of the service area. 1. Press and hold at standby screen until "Power Search" screen appears. The phone starts to search for network signals. • "Power Search OK" will be displayed on locating the strongest signal.

Learning to use your phone 2-17 � � � � Note: • You can press other keys when the phone is searching for network signals, however this will stop network searching. • You can also search for network signals during a call, but it is limited to three. • Searching for network signals may not always find network signals. • This feature is only available in public mode.

3. Setting Up Your Phone (Main Menu) 3.1 Key Beep • You can either keep the beep on or off. The default setting is “ON”. 1. Press , to display “Call/vibrator” menu. 2. Press “key beep” toggles from “ON” to “OFF” � � � �Note: • If key beep is “OFF” then you will not hear any completion tones or warning tones. • To set “key beep” please repeat steps 1 and 2. When the icon switches from “OFF” to “ON”, it indicates the “key beep” has been set. • After step 1, you may move the cursor to “key beep” press to toggle between “ON/OFF” 3.2 Manner Setting 3.2.1 Manner Setting • This menu helps to set the ringer volume, key beep or vibrator. • This feature allows you to instantly change the ringer volume. • There are three options in manner setting: 1. Key beep on/off: Turns on/off the key beep. 2. Vibrator on/off: Turns on/off the vibrator 3. Volume off/adjust: This option helps in turning off and adjusting the volume for Incoming call, alarm, schedule and mail/SMS. • In the default setting, “Vibrator” is “ON”; “Key Beep” and “Volume” are “OFF”.

UT618 User Manual 1. Press , to display the “Manner Setting” screen. 2. Press to select the item. 3. Press for “ON/OFF”. 4. While setting the volume, press , to display “Volume”. • There are five levels of volume to choose from (1-5). Use the scroll up, scroll down key to raise or lower the volume. • Please press to set volume press . 5. Press , to display “set”, which means the manner setting, is done. 3.2.2 Setting/Canceling Manner Mode 1. Press and hold , to display “Set”, selection of which will display “manner mode”, which means the manner setting has been set. • If the manner setting is set to on, “ ” icon is displayed on the main display. � � � � Note: • While in standby mode if the “Manner Setting” is ON, and if you press and hold , “Cancelled” will be displayed to indicate that the manner setting has been cancelled. • When the manner setting is set to ON, there is no confirmation beep, however if the vibrator is set to “ON”, the phone vibrates one time. • When the manner setting is cancelled; there is no confirmation beep and vibration. 3.3 Setting Vibrator • On setting the vibrator the phone will vibrate to indicate the Incoming call, alarm, and scheduled activity time or new message/email, • There are three options to choose from. The default vibrator setting is “OFF”. • While the battery is being recharged, irrespective of whether the vibrator is turned ON or OFF, it will not vibrate. 1. Press , to display the “Vibrator” menu with the current settings. 2. Press to select the items you want to set press to display the vibrator setting screen.

Setting Up Your Phone 3-3 3. Press to select vibrator type press • When you set vibrator type, the phone will vibrate with the set style for reference 4. Press , to display “Set” which means the vibrator has been turned on. � � � � Note: • When “call” vibrator is set to “ON”, ‘ ” icon is displayed on the main display. • When SMS/Mail vibrator is set to on, the phone vibrates three times when you receive a new message or email. 3.4 Setting Earphone Pickup • If this feature is activated, the phone will answer incoming calls automatically if the earphone is plugged in. • The default setting of earphone pickup is “OFF”. 1. Press , to display “Call/ Vibrator” menu. 2. Press to toggle “Earphone pickup” between “OFF” and “ON”. • When there is an incoming call, the phone will answer the call automatically after 5 seconds of ringing. The ring can be heard from the earphone. � � � � Note: • To cancel “Earphone pickup”, please repeat steps 1 and 2. The icon will switch from “ON” to “OFF”, which means the earphone pickup is cancelled. • This feature is only available under “Public” mode. • This does not have effect on the short messages and emails, and behaves the same way as it would without the earphone. 3.5 Melody Setting • This feature allows you to change the melody and the volume for call, alarm, schedules and SMS/Mail. • There are three ringing categories: 1. Harmony (10 built-in four chord melodies) 2. Monody (6 built-in melodies and 10 composed and downloaded melodies) 3. Analog (6 composed melodies and 1 voice memo)

UT618 User Manual 3.5.1 Melody Select 1. Press , to display “Melody Select” menu. • The current melody setting is indicated in the next line. The volume indicator is on the right side. 2. Press to select the desired item press , to display “Melody List”. 3. Press to select melody. • Built-in melodies are listed as Harmony Monody Analog. • They are illustrated as follows: Melody Symbol Description Harmony (built-in) Harmony(downloaded) Monody (built-in) Monody (composed) Analog (built-in) Voice memo Copy Guard Volume • Please press to play melody. • Press to display the melody sub-menu. Press to show the details of the selected melody. 1. When selected, press 2. Press to display “Volume” screen. • There are five levels of volume to select from, which can be selected by the scroll up and scroll down button. • Please use to set volume press . • Volume is ranked from low to high. • Please press to play melody 3. Press , to display “Set”, which means the selected melody and the volume have been set. � � � � Note: • The phone rings only for 5 seconds for emails. • When “Manner Setting” is activated, the ringing will be set to mute. • Ringing style cannot be changed under group mode.

Setting Up Your Phone 3-5 3.5.2 Searching Melody by Category 1. Press , to display “Melody Select” menu. 2. Press to select the item you want to search press , to display the “Melody List”. 3. Press to display the melody sub-menu. The sub menu options are: 1. Harmony 2. Monody 3. Analog 4. Detail: detailed information of the melody 4. Press or or to select the melody category. 5. Select the melody and press . 3.5.3 Deleting Composed Melodies Individually- method 1 1. Press , to display “Melody Select” menu. 2. Press to select the item you want to search press , to display the “Melody List”. 3. Press to select the item you want to delete. • You can also press to enter “Melody List” sub-menu to select the melody you want to delete. Please refer to section “Searching Melody by Category” Step 3-5. 4. Press to display the melody sub-menu 5. Press , to display “Deleted”, which means the selected melody has been deleted. � � � � Note: • Built-in melodies cannot be deleted. • To delete voice memo, please refer to section “Deleting the Voice Memo”. • If the deleted melody has been set as the melody for a feature, the feature will be reverted back to the default ring tone. 3.5.4 Deleting all Composed Melodies-method 1 1. Press , to display “Melody Select” menu.

UT618 User Manual 2. Press to select the item you want to search press , to display “Melody List”. 3. Press to select a melody composed by you. 4. Press to display the melody sub-menu 5. Press to select “Delete All”, “Delete All Registered Songs?” will be displayed. 6. Press “YES” press , to display “Deleted” which means all composed melodies have been deleted. 3.6 Composing a Melody 3.6.1 Composing a New Melody • Composed melody can be used as ring for calls, alarms, schedules and SMS/Mail. • Composed melody is monody. It can have a maximum of 255 notes for each melody and you can compose up to 10 songs. • There are 13 notes and 8 rhythms to edit. • The following illustrates the 13 notes in the phone: Semiquaver semibreve Quaver Semiquaver rest Dotted crotchet Quaver rest Crotchet Crotchet rest Dotted quaver Minim rest Minim Rest Dotted minim • The following illustrates the key range for composition: 1. Press to display the “Melody Compose” screen. 2. Press to select a number that does not have saved data Press to enter new melody composing screen. 3. Using numeric key enter notes and rests. • Rest cannot be used at the beginning of the song.

Setting Up Your Phone 3-7 • To change the scale of a note, please refer to the following method: Keys Press once Press twice Press three times Press four times Press five times Press six times 1 1# 1▲ 1 2 2# 2▼ 2 2▲ 2 3 3▼ 3▲ 4 4# 4▼ 4 4▲ 4 5 5# 5▼ 5 5▲ 5 6 6# 6▼ 6 6▲ 6 7 7▼ 7▲ rest 4. Use , , to change the length of a note: • Press to select the note you want to change and then using , and change the length of the note. • To edit the length of a note please refer to the following methods. Key Default setting Press once Press twice Press three times Press four times Crotchet Quaver Semiquaver Semibreve Minim Crotchet Minim Semibreve Semiquaver Quaver No dot Dot 5. Press to play the melody while composing. • You can adjust the pace and volume of the melody during playback. There are 8 playing pace to select from: : Increase the tempo : Decrease the tempo : Decrease the volume : Increase the volume • The “tmp” on the upper-right side of the display indicates the tempo. • Press again to end playing. 6. When completed press to display “Title” screen. • You can enter up to 20 alphabets or 40 alphanumeric characters.

UT618 User Manual 7. Enter the title press , to display “Registered”, which means your self- composed melody has been saved. � � � � Note: • To set the self-composed melody as ring for a call or alarm, please refer to section “Melody Select”. • If the battery is removed while the melody is being composed the melody recorded will be lost. • If there is an incoming call or you press during composition of a melody, the composed content will be saved temporarily. The phone can only save one temporary data. To resume the composition, please refer to section “Resuming Melody Composing”. 3.6.2 Modifying a Melody • You can modify the self-composed melody that is saved in the phone. 1. Press to display “Melody Compose” screen. 2. Press to select the melody you want to edit Press to enter melody composing screen, which allows you to edit the melody. 3. To modify the melody, please refer to section “Composing a new melody” Steps 3-5. 4. When completed press . 5. Press to select a data number for saving the melody press . • If you select an unused data number, the “Title” screen will be displayed. Enter the title. The maximum number of characters allowed is 20 alphabets or 40 alphanumeric characters. • If you select a used data number, “Replace?” is displayed. Select “YES” press to replace the melody. • When the replaced melody has been set as the ring for calls, alarms, schedules, SMS/Mail, favorite calls and group calls, “Change as a Ringer?” is displayed. 6. Enter the title press , to display “Registered”, which means the edited melody has been saved.

Setting Up Your Phone 3-9 3.6.3 Resuming Melody Composition • During composition, if there is an incoming call or if you press , the composed data will be saved temporarily. 1. Press , “Delete Composing Data, YES/NO” is displayed. 2. Select “No” press to enter the “Melody Composing” screen. • To delete the melody you are composing, please select “YES”, to display “Deleted”, which means the melody has been deleted. 3. To resume the composition, please refer to “Composing a New Melody” Steps 3-7. 3.6.4 Deleting Composed Melody Individually- method 2 1. Press to display “Melody Compose” screen. 2. Press to select the composed melody you want to delete. 3. Press to display the sub-menu 4. Press to select “Delete One”, “Deleted” will be displayed, which means the selected melody has been deleted. � � � � Note: • If the deleted melody has been set as the melody for a feature, the feature will be reverted back to the original default ring tone. 3.6.5 Deleting All Composed Melodies- method 2 1. Press to display “Melody Compose” screen. 2. Press to display the sub-menu 3. Press to select “Delete All”, “Delete All?” is displayed. 4. Press “YES” press , to display “Deleted”, which means all self- composed melodies have been deleted. 3.7 Voice Memo 3.7.1 Recording a Voice Memo • You can record a 15-second record as a call ring. To set call ringing, please refer to “Melody Select”.

UT618 User Manual 1. Press , to display “Voice Memo” menu. 2. Press to select “2 Record”, to display “Recording” which means that the record begins. 3. If you press or when the “End Recording” screen is displayed, the record is said to have ended. Then “Subject” screen is displayed. 4. Enter the subject. 5. Press , to display “Registered”. � � � � Note: • If there is an existing voice memo; “Replace?” will be displayed at step 2. Select “YES” press to replace the old data. If the old voice memo has been set as the ring for calls, alarms, schedules or SMS/Mail, then the setting will be cancelled. You need to reset it. • If you press during recording, “Stop Recording” will be displayed, which means the recording has been stopped. 3.7.2 Playing the Voice Memo 1. Press , for the “Voice Memo” to be displayed. 2. Press to select “1 Play”, “Playing” and the subject of the voice memo will be displayed, which means the phone is playing the voice memo. • If the phone does not have voice memo record, then “Play” will be grayed out and cannot be selected. 3. If you press or when the playing ends, “End Playing” will be displayed. 3.7.3 Deleting the Voice Memo 1. Press , to display “Voice Memo” menu. 2. Press to select “3 Delete”, to display “Delete?”. • If the phone does not have voice memo record, then “Delete” item will be grayed out and cannot be selected. 3. Select “YES” press , to display “Deleted” which means the voice memo has been deleted.

Setting Up Your Phone 3-11 3.8 Setting the Time • When the time is set, the items such as alarm in “ Time Manager” can be used. Incoming/Dialed Record will have the corresponding time and date stamp. • The time can be set from January 1 2000 to December 31 2099. • Its default setting is 00:00 01/01/2002 (January 1, 2002). 1. Press , to display “Time/Date” screen. 2. Press to select “Main Display” ON/OFF. • Select “ON” to show the time and date on the main display; select “OFF” to hide the time and date. • The selected text will flash. • When selected, the cursor will automatically move to the next item “Date”. 3. Use numeric keys to enter month, day and year. • Please enter date as “month/day/year”. • When completed, the cursor will automatically move to the next item “Time”. • If there is an error in the time and date you entered, please re-enter it on hearing the warning beep. 4. Use numeric keys to enter the time. • Please enter the time as “hour: minute” in 24-hour mode. 5. Press , to display “Set” which means the time is set. 3.9 Setting an Alarm • When the alarm is set, the phone will ring the alarm at the set time of the day or the date. • To use alarm function, you must set date and time first. Please refer to section “Setting the Time”. • Please refer to “Melody Select” on how to select an alarm ring tone. • Its default settings are as follows: Setting: “OFF” Day: Appointed Day Once: “01/01” Appointed day: “Sun, Mon, Tue, Wed, the, Fri, Sat” are all “ON”.

UT618 User Manual Alarm Time: 15sec. Snooze: “OFF” Once: The alarm will ring at the preset time on the appointed date. Appointed day: The alarm will ring at the preset time on the assigned day every week. Snooze: When this function is activated, if you stop the alarm, it will snooze after every 5 minutes for 5 times. 3.9.1 Setting an Appointed Date • The alarm will ring at the preset time on an appointed date. 1. Press , for the “Alarm” screen to appear. • The text at the cursor flashes. 2. Press to select “ON” press . • When completed, the cursor will automatically jump to the next item “Alarm”. 3. Press select “1.Day” press . 4. Enter the alarm date. • If there is an error in the time and date you entered, please re-enter it after you hear warning beep. 5. Press , the cursor automatically moves to the next item “Time”. 6. Enter the time. (24-hour mode) • If there is an error in the time and date you entered, please re-enter it after you hear warning beep. • When completed, the cursor will move to the next item “Alarming Time”. 7. Enter the length of the alarm time. (5-30 seconds) • When completed, the cursor will automatically move to the next item “Snooze”. 8. Press to select ON/OFF. : Snooze ON (after the alarm ringing stops, the phone will play alarm every 5 minutes and it will play 5 times). : Snooze off. 9. Press , to display “Set”, which means the alarm, is set.

Setting Up Your Phone 3-13 • The icon is displayed on the main display. 3.9.2 Setting an Appoint Day • The alarm will ring at the preset time on the same day of every week. 1. Press , to display “Alarm” screen. 2. Press to select “ON” press . • When completed, the cursor will automatically jump to the next parameter “Alarm”. 3. Press to select “2 Appoint Day”. 4. Press to display “Alarm” ON/OFF screen. 5. Press to select the day press to select ON/OFF. 6. Please refer to section “Setting an Appointed Date” Steps 5-9 to complete the setting. 3.9.3 Stopping the Alarm Ring 1. When the alarm rings, “Alarm” is displayed on the main display. 2. Press to stop the ring. • Press again to clear the alarm animated graphics. � � � � Note: • If you are talking on the phone, the alarm will not sound until you hang up the phone. • When the phone’s alarm rings, you can close the flip to stop the ringing. Opening and closing the flip again will clear the alarm animation. • If an alarm and a schedule are set for the same time, the phone plays the alarm ring first and then the schedule ring. 3.10 Schedule • At the preset time, the phone will play the schedule ring. The main display indicates the scheduled activity. • To set the melody of the schedule, please refer to “Melody Select”. • You can set up to 40 schedules for a 12-month cycle.

UT618 User Manual • If you have not set date and time, “Schedule” is grayed out and cannot be selected. To set the date and the time, please refer to section “Setting the Time”. • You cannot set schedules for past dates. 3.10.1 Setting a Schedule 1. Press , to display “Schedule” menu. 2. Press to select “1 New”, to display the current month calendar. • If the phone has 40 saved schedules, “1 New” will be grayed out and cannot be selected. The cursor will move to “2 Edit” • If a date has been set a scheduled activity, it will be displayed with a gray circle. If it is also set as an anniversary day, the date will have a gray background with a frame outside. • Press to display the next month calendar; press to display the previous month calendar. 3. Press to select the date press . • If the selected date already has other schedule set, the schedule list will be displayed press to enter editing screen. • After the phone automatically enters the preset date, the cursor will move to “Time”. • To edit date, please press to move to “Date” and edit it. 4. Enter the time (24-hour mode). • When completed, the cursor will automatically move to “Message”. 5. Press to display “Message” screen. • Please refer to section “Entering Text” on how to input text. • You can enter with a maximum of 18 alphabets or 36 alphanumeric characters. 6. When completed press , the cursor will automatically move to the next item “Icon” • The default setting of “Icon” is “Other”. 7. Press , to display classified “Icon” picture. 8. Press to select the icon and then press . • The icons are illustrated as follows:

Setting Up Your Phone 3-15 Plan Eat Sports Date Movie Birthday Anniversary Wedding Travel Shopping Holiday Test Meeting Hospital Party Other • Press to preview the image on the main display for the scheduled time. 9. Press , to display “Registered”, which means the schedule, has been set. � � � � Note: • The phone will play the schedule ring for about 30 seconds at the scheduled time. The schedule icon will be displayed on the main display for about 90 seconds. • If you are talking on the phone, the phone will not play the ring until you hang up. • Press to stop the schedule ringing. • To clear the schedule icon display, please press after you stop the schedule ring. • If there is a scheduled activity set at the same time, “Replace?” will be displayed. Select “YES” press to replace the old schedule. • If an alarm and a schedule are set at the same time, the phone plays the alarm first and then it plays the schedule ring. 3.10.2 Searching a Schedule by Icon • You can search a schedule based on schedule icons. • The schedule will show all the activities of the selected icon according to the icon category. • If you have not set any schedule, “Icon” is grayed out and cannot be selected. 1. Press , to display “Schedule” menu. 2. Press to select “Icon”, the “Icon” is displayed. • The icons are illustrated as follows: Plan Eat Sports Date Movie Birthday Anniversary Wedding

UT618 User Manual Travel Shopping Holiday Test Meeting Hospital Party Other 3. Press to select the icon you want to search press to display all the activities in the selected category. 4. After you press to select the icon press to display the contents of the schedule. • Press to enter the editing screen to change the scheduled activities. 3.10.3 Modifying a Schedule • You can modify your scheduled activities. • If you have not set any schedule, “Edit” item is grayed out and cannot be selected. • Press to display the next month calendar; press to display the previous month calendar. • If the other months have no scheduled activities, cannot be selected. 1. Press , to display “Schedule”. 2. Press to select “Edit”, to display the current month calendar. • If a date already has a scheduled activity; the date will have a gray circle. If it also has an anniversary day, the date will have a gray background with a frame outside. 3. Press to select the date you want to edit press , all the activities for this date will be displayed. 4. Press to select the activity press to view the content of the scheduled activity. 5. Press to select the item you want to edit. Please refer to section “Setting a Schedule” Step 3-9 on how to edit and save it. 3.10.4 Deleting Schedule Individually 1. Press , to display “Schedule” menu. 2. Press to select “Edit”, to display the current month calendar.

Setting Up Your Phone 3-17 • Press to display the next month calendar; press to display the previous month calendar. • If the other months have no scheduled activities, cannot be used. 3. Press to select the date you want to delete press , all the activities for this date will be displayed. 4. Press to select the activity you want to delete press to display the sub menu. 5. Press to select “Delete One”, “Deleted” is displayed, which means the selected activity has been deleted. 3.10.5 Deleting the Current Day Schedule • You can delete all activities for the current day in the schedule. 1. Press , to display “Schedule” menu. 2. Press to select “Edit”, to display current month calendar. • Press to display the next month calendar; press to display the previous month calendar. • If the other months have no scheduled activities, cannot be selected. 3. Press to select the date you want to delete press , all the activities for this date will be displayed. 4. Press to display the sub menu 5. Press to select “Delete All”, “Delete All?” is displayed. 6. Select “YES” press , to display “Deleted”, which means the current day schedule has been deleted. 3.10.6 Deleting All Past Schedules • You can delete all past schedules. • If there is no past schedule, “Del. Past Data” item is grayed out and cannot be selected. 1. Press , to display “Schedule”. 2. Press select “4 Del. Past Data”, “Delete All?” is displayed.

UT618 User Manual 3. Select “YES” press , to display “Deleted”, which means all past schedules have been deleted. 3.10.7 Deleting All Schedules • You can delete all scheduled activities. • If there is no schedule saved in the phone, “Delete All” item is grayed out and cannot be selected. 1. Press , to display “Schedule” menu. 2. Press to select “Delete All”, to display “Delete All?” 3. Select “YES” press , to display “Deleted” which means all schedules have been deleted. 3.11 Calendar • The phone can display calendar from January 1900 to December 2099. • If there is a scheduled activity, you can view the detail from the calendar. However, it does not work for anniversary. • If you have not set the date and the time, “Calendar” is grayed out and cannot be selected. Please refer to section “Setting the Time” on how to set the time and the date. 1. Press , to display the current month calendar. • The following keys are used for navigational purpose: : Displays the next month’s calendar : Displays the previous month’s calendar : Displays the same month’s calendar for the next year : Displays the same month’s calendar for the previous year • The various parameters in the calendar are represented as: General day: Black character Current day: Black character flashes Anniversary: Black character, gray diamond Schedule: Black character, gray circle • When an anniversary and a schedule fall on the same day, it is represented with gray background and a frame outside • Press in a calendar that has scheduled activities, the scheduled activities will be displayed. However the content of the anniversary cannot be displayed.

Setting Up Your Phone 3-19 • Press to select another schedule. 3.12 Anniversary • If you have set an anniversary day, the anniversary icon and information will be displayed on the main display on that day. • You can enter a maximum of 8 alphabets or 16 alphanumeric characters. • You can save up to 10 anniversary data. • If the date and time are not set, “Anniversary” is grayed out and cannot be selected. Please refer to section “Setting the Time” on how to set the date and the time. • An anniversary cannot be set or changed on the day of the anniversary. 3.12.1 Setting a New Anniversary 1. Press , to display the “Anniversary” screen. 2. Press to select “1 New”, to display the anniversary editing screen. 3. Set the date and the time. • Use numeric keys to enter the date, when completed, the cursor will automatically move to the next parameter “ Subject”. 4. Press to display “Subject”. • Please refer to section “Entering Text” on how to input text. 5. Press , to move the cursor to the next parameter “Icon”. • The default setting for icon is “Other”. 6. Press to display the “Icon” category. 7. Press to select the icon, press . The various icons with their descriptions are shown below: Plan Eat Sports Date Movie Birthday Anniversary Wedding Travel Shopping Holiday Test Meeting Hospital Party Other • Press to preview the image on the main display. Press to return.

UT618 User Manual 8. Press , to display “Registered”, which means the anniversary day has been set. � � � � Note: • The anniversary icon and information will be displayed on the main display on the anniversary day. • To turn off the anniversary display; please refer to section “Setting an Anniversary Display”. • The anniversary display will have a priority over the wallpaper display. • If the anniversary day exits only in a leap year, it will be displayed every four years. 3.12.2 Changing an Anniversary • If you have not set any anniversary, “Edit” is grayed out and cannot be selected. 1. Press , to display “Anniversary” screen. 2. Press to select “Edit” to display the anniversary list sorted by date. 3. Press to select the anniversary you want to edit press , to display the content of the anniversary. 4. Press to select the item you want to edit. Please refer to section “Setting a New Anniversary” Steps 3-8 on how to edit and save. 3.12.3 Setting an Anniversary Display 1. The anniversary icon and information will be displayed on the main screen on the anniversary day in the standby mode. 2. Press to display “Display Anniversary? ON/OFF”. 3. Select “OFF” press to turn off “Display Anniversary” and the phone returns to the standby mode wallpaper. • If “Display Anniversary” is turned off, pressing will not work. � � � � Note: • If you turn off “Display Anniversary” on the anniversary day, and then turn on/off the phone, reset the date and the time or set/edit/delete the anniversary, the anniversary icon and information will be displayed again.

Setting Up Your Phone 3-21 3.12.4 Deleting Anniversary Individually 1. Press , to display “Anniversary” screen. 2. Press to select “Edit” to display the anniversary list sorted by date. 3. Press to select the anniversary you want to edit press to display the sub menu. 4. Press to select “Delete One”, “Deleted” is displayed, which means the selected anniversary has been deleted. 3.12.5 Deleting All Anniversaries 1. Press , to display “Anniversary” screen. 2. Press to select “Edit” to display the anniversary list sorted by date. 3. Press to display the sub menu 4. Press to select “Delete All”, “Delete All?” is displayed. 5. Select “YES” press , to display “Deleted”, which means all anniversaries have been deleted. � � � � Note: • Pressing to select “Delete All” in Step 2 can delete all anniversaries. 3.13 Setting the Sub LCD • You can select the color of display for the sub LCD, from among the three colors available, viz. red, orange and green. • The sub LCD color can be set for the following features: “Call’, “Alarm”, “Schedule” and “SMS/Mail’. The default settings are “Green”, “Red”, “Orange” and “Orange”. 1. Press , to display “Sub LCD” menu. 2. Press to select the item you want to set press to enter color setting screen. 3. Press to select the color you want to set press . • If you press when you select the color, the sub LCD light will flash. Press again or wait for 3 seconds for the light to go off. 4. Press , to display “Set”, which means, the Sub LCD has been set.

UT618 User Manual � � � � Note: • The following are the details of the Sub LCD, the backlight and the ringing under various situations: When the phone flip is closed When the phone flip is open When the phone flip is closed again Call (Favorite Call, Group, Data Comm) The Sub LCD flashes; the backlight goes off; the call rings The Sub LCD does not flash; the backlight goes on; the call continues to ring The Sub LCD flashes; the backlight goes off; the call ring is muted Alarm The Sub LCD flashes; the backlight goes off; alarm rings The Sub LCD does not flash; the backlight goes on; alarm continues to ring The Sub LCD does not flash; the alarm ringing stops; “Alarm” is still displayed; Schedule The Sub LCD flashes; the backlight goes off; the schedule rings Sub LCD does not flash; the backlight goes on; the schedule information is displayed; the schedule ring stops Sub LCD does not flash; the schedule information is displayed SMS/Mail The Sub LCD flashes; the backlight goes off; the SMS/Mail rings The Sub LCD does not flash; the backlight goes on; the SMS/Mail ringing stops The Sub display displays “You got E- Mail”; with no 3.14 Setting Wallpaper 3.14.1 Selecting Wallpaper • You can select your favorite picture as the phone’s wallpaper. • The picture from Air Info can also be set as wallpaper. 1. Press , to display “Wall Paper” menu. 2. Press to select the picture category you want to set as the wallpaper press . • The following are the categories of the pictures: (1) Fixed picture: The phone has default pictures for you to select. (2) Picture: Pictures saved from Air Info or picture attachments. You can save up to 10 pictures. (3) No Wall Paper: Do not set wallpaper. • If you do not save any pictures, “2 Picture” item is grayed out and cannot be selected. 3. Press to select the picture you want to set. • If you press “2 Picture”, the picture list will be displayed. Select the picture you want to set press to view the picture.

Setting Up Your Phone 3-23 • After you select the picture, press to preview the wallpaper. 4. Press , to display “Set”, which means the wallpaper, has been set. 3.14.2 Deleting Pictures • You can delete pictures you saved in the phone. • You can only delete the pictures saved by you and not delete the fixed pictures. 1. Please refer to section “Setting Wallpaper” Steps 1-3. Select the picture you want to delete. 2. Press , to display the sub menu. 3. Press to select “Delete One”, to display “Deleted”, which means the selected picture has been deleted. � � � � Note: • To delete all pictures, please select “2 Delete All” in Step 3. “Delete All?” will be displayed, select “YES” press . “Deleted” is displayed, which means all pictures have been deleted. • If the deleted picture is set as current wallpaper, it will be still be retained as wallpaper. But when you reset the wallpaper, this picture will be deleted. 3.15 Setting LCD Contrast • You can use this function to set the contrast for the main display and the sub display. • There are 10 levels to select from. • The default settings for the two displays are all 6. 3.15.1 Setting the Main Display Contrast 1. Press , to display “LCD Contrast” menu. 2. Press to select “1 Main Display”. 3. Press to adjust the level of the main display contrast. • During the adjustment, your selected contrast scale will be displayed on the main display for your reference. 4. Press , to display “Set”, which means the main display contrast, has been set.

UT618 User Manual 3.15.2 Setting the sub Display Contrast 1. Press , to display “LCD Contrast” menu. 2. Press to select “2 Sub Display”. 3. Press to adjust the level of the main display contrast. • During adjustment, “Contrast Setting” will be indicated on the sub display. 4. Press , to display “Set” which means the sub display contrast has been set. 3.16 Setting the Backlight • If you press any key on the phone, the backlight will go on. • If you do not press any key within a particular time limit, it will go off. • You can set the backlight flashing time (5-99 seconds). • The default setting for “Back Light” is “ON”. The default setting for “Flashing Time” is “30sec”. 1. Press , to display “Back Light” menu. 2. Press to select “ON”. • When selected, the cursor will automatically move to the next parameter “Flashing Time”. 3. Use numeric keys to enter flashing time press , “Set” is displayed which means the backlight has been set. � � � � Note: • To turn off backlight, please press and select “OFF” in Step 2 and press to turn off the backlight. • When Air Info is in use, if the preset flashing time is under 20 seconds, the backlight will still flash for 20 seconds; if the preset flashing time is over 20 seconds, it will flash for the actual preset time. • Turning on backlight will consume more battery power. 3.17 Setting a Standby Mode 1. Press , to display “Standby Mode” menu.

Setting Up Your Phone 3-25 2. Press to select the standby mode. 3. Press , to display “Set”, which means the selected standby mode, has been set. • The text information of the selected standby mode will be displayed after “Set” is displayed, which means the selected standby mode has been set. � � � � Note: • If the phone has not been set “Group”, “Group”, “Public/Group” and “Transfer” are grayed out and cannot be selected. Please refer to section on how to set group mode. • You can also set it by pressing under standby mode. • For more detailed information please refer to section on “Introduction to Standby Mode”. 3.18 Calculator • The phone can carry out addition, subtraction, multiplication and division within 10 digits. 1. Press , to display “Calculator” screen. 2. Calculate. • The calculator is illustrated as follows: • Press numeric keys to enter numbers. : Enter dot (you can also press ) : “+” : “-“ : “×” : “÷” : “=” : Delete the last number : Delete entered numbers Press and hold : Start new calculation • e.g. Calculate “100 ÷ 2” • Press , which means “100” is entered. • Press , to enter “÷”. • Pressing , to enter “2” • Pressing , to enter “=” and at the same time, calculating result.

UT618 User Manual 3. If you want to end calculation, press to go back to standby mode. • ·Press to go back to “Special” menu. � � � � Note: • You can use this result to do the next calculation. • If the calculation is over 10 digitals or it is against algorithm, the phone will sound warning beep and “ERROR” will be displayed. • When you calculate, if there is an incoming call and you answer it then the calculation data will be lost. 3.19 LDS (needs network support) • If you set LDS on and use “Air Info”, the location of the phone will be recorded in MiMi center. Therefore, you can get your current surrounding information. • This function can be used under Public/Group mode. When any three digits of a telephone number are dialed, the location information will be sent to MiMi center. • Its default setting is “OFF”. 1. Press , to display “LDS” ON/OFF icon. 2. Press to switch on/off. • If LDS is turned on, icon will be displayed on the main display. 3.20 LTS (needs network support) • Setting LTS “ON” allows you to trace the phone. • In order to protect the user’s privacy, it required password validation for using “LTS”. This password is an independent password, which is different from the phone password. • For more detailed information, please contact your local service provider. • Its default setting is “OFF” • The default password for LTS is “9999”. 3.20.1 Setting LTS 1. Press , to display “LTS” menu. 2. Press to select “1 LTS Setting” enter the password.

Setting Up Your Phone 3-27 • The password you entered will be displayed as “****”. If the password is incorrect, “Invalid Password” will be displayed and the screen will go back to the standby mode. 3. Press to select “1 ON” press . • You can also press to select “1 ON”. 4. Press to select the item you want to set. For example, select “LTS Alarm On”. 5. Press , to display “Set”, which means the selected LTS function, is turned on. • Icon is displayed on standby mode wallpaper. � � � � Note: • To turn off “LTS”, please press “2 OFF” in Step 3, “LTS OFF Saved” will be displayed, which means LTS has been turned off. • When MiMi center begins to trace the phone, “LTS Activating” will be displayed. If the LTS alarm is turned on, the phone will ring and vibrate to notify the user. • If the LTS alarm is turned off, the phone will only vibrate to notify the user. 3.20.2 Changing the LTS Password 1. Press , to display “LTS” menu. 2. Press to select “2 Change pwd” enter the password. 3. Enter the new password. • Enter a 4-digit number as a new password. 4. Re-enter the new password to confirm it. • If the password is correct, “Set” is displayed, which means the password has been changed. • If the password is incorrect, “Invalid Password” is displayed. Please re- enter the new password. � � � � Note: • Please record your password incase you forget it. • If you forget the password, please send the phone to your local service provider’s service center to reset it.

UT618 User Manual 3.21 Selecting the Language • The phone supports to languages “ENGLISH” and “CHINESE”. • The default setting for the language is “CHINESE”. The menu is in Chinese. 1. Press , to display “Language” menu. 2. Press to select the language you want to use press , to display “Set”, which means the language, has been set. 3.22 Phone Lock • When the phone lock is turned on, only the pickup key and the number keys will work. • Turning on phone lock can prevent others from using your phone. • The phone is not set with the phone lock when you buy it. 3.22.1 Setting Phone Lock 1. Press , to display “Phone Lock” screen appears. 2. Enter the password. • The password you entered will be displayed as “****”. • If the password is correct, “Set” is displayed, which means the phone lock has been activated. If the password is incorrect, “Invalid Password” will be displayed then go back to the standby mode screen. • The icon will be indicated on the main display. � � � � Note: • Please refer to section “Changing the Phone Lock Password” on how to set password. • You can still answer a call under “Phone Lock” mode. When there is an incoming call, “In Use”, “Mute” and “Block Call” can still be used normally. • When you are talking under “Phone Lock” mode, features like earpiece volume adjustment, call hold, displaying your own number, whisper, call waiting and 3-party call can still be used normally. The following functions do not work, searching the phone book and number memo. 3.22.2 Canceling Phone Lock • You can use numeric keys to enter the password under standby mode.

Setting Up Your Phone 3-29 • The password you entered will be displayed as “****”. • If the password is correct, “Cancelled” will be displayed, which means “Phone Lock” has been cancelled. The icon on the main display will disappear. If the password is incorrect, it will display “Invalid Password” and go back to the standby mode screen. 3.23 Changing the Phone Password • Some functions in this phone need password in order to protect the user’s privacy. • Please choose a 4-digit number as your phone password. • The default setting for the password is “0000”. • If you forget your password, please send the phone to your local service provider’s service center to reset it. 1. Press , to display “Change Password” screen. 2. Enter the password. • The password you entered will be displayed as “****”. • If the password is correct, “New Password” screen is displayed. If the password is incorrect, “Invalid Password” will be displayed and it will go back to the standby mode wallpaper. 3. Enter the new password. • After you enter the new password, “Re-enter New Password” screen is displayed. 4. Re-enter the new password. • If the password is correct, completion ring is played and “Set” is displayed, which means the password has been changed. � � � � Note: • The password of “Group Setting” or “LTS” is different from this password. • Please refer to section “Setting a Group” on how to set group setting password. • Please refer to section “Changing the LTS Password” on how to set LTS password. 3.24 Voice Mail (needs network support) • This feature needs network support for use.

UT618 User Manual • When your phone is turned off, out of the service area or you cannot answer calls under some specific situations, the incoming call information will be recorded in the voice mail. The system will answer the calls and ask the callers to leave messages. 3.24.1 Accessing Voice Mail 1. Press , to display “Voice Mail” menu. 2. Press to select “1 Play”, the phone will automatically connect to the system’s voice mail center. Please follow the voice response to operate. 3.24.2 Turning On/Off Voice Mail 1. Press , to display “Voice Mail” menu. 2. Press to select “2 ON”, the phone will automatically connect to the system’s voice mail center. Please follow the voice response for operations. � � � � Note: • To turn off voice mail service, please press to select “3 OFF” in Step 2. • All the functions of the voice mail need to connect to the system for use. Please follow the prompts to operate and complete the settings. Voice mail cannot be set when the phone is out of the service area or at a place where the signal is weak. 3.24.3 Checking the Voice Mail setting 1. Press , to display “Voice Mail” menu. 2. Press to select “4 Setting Check”, the phone will automatically connect to the system’s voice mail center. Please follow the prompts for operation. 3.24.4 New Voice Mail Reminder • When you get a new voice mail in the system’s voice mail center, it will send short message to notify you and “You Got SMS” will be displayed on the screen.

Setting Up Your Phone 3-31 3.25 Your Own Number • You can use this feature to set the phone number in the phone and press to display “Own number” to check it. • The number can be the actual phone number or a virtual number (e.g. for security reason). 3.25.1 Setting Own Number 1. Press , to display “Change Own Number” screen. 2. Enter the phone password. • The password you entered will be displayed as “****”. • If the password is correct, “New Password” screen is displayed. If the password is incorrect, “Invalid Password” will be displayed and it will go back to the standby mode screen. 3. Enter the phone number. 4. Press , to display “Registered”, which means the own number, has been saved. � � � � Note: • If the phone has set an own number; your own number will be displayed in Step 2 after you enter the password. Please enter the new number in Step 3. 3.25.2 Displaying Own Number 1. Press to display “Own Number”. If you have not set “Own Number”, it will be displayed as “---“. • The displayed number is the number you saved in “Change Own Number”. • You can check your own number even you are talking on the phone. When the checking is completed and the result is displayed, the screen will go back to the in use display after 60 seconds. 3.26 Toll Lock • You can set long distance call lock. When the toll lock is turned on, long distance calls cannot be dialed out. • The default setting for Toll Lock is “OFF”. • Toll lock cannot lock long distance call made by IP, or phone cards.

UT618 User Manual 3.26.1 Turning On Toll Lock 1. Press , to display “Toll Lock” menu. 2. Select “1 ON”, to display “Set”, which means the toll lock is turned on. • If the toll lock is set on, will be displayed on the main display. • If you dial a long distance call number and press , “Toll Locked” will be displayed and the call cannot be dialed out. 3.26.2 Turning Off Toll Lock 1. Press , display “Toll Lock” menu. 2. Select “2 OFF”, to display “Password” screen. 3. Enter the password. • The password you entered will be displayed as “****”. • If the password is correct, “Cancelled” will be displayed, which means toll lock has been turned off; if the password is incorrect, “Invalid Password” will be displayed and it will go back to the standby mode screen. 3.27 Reset • You can reset some of the default settings. 1. Press , to display “Password” screen. 2. Enter the phone password. • The password you entered will be displayed as “****”. • If the password is correct, “Reset? Yes No” appears; if the password is incorrect, the phone will play a warning beep and “Invalid Password” will be displayed then the screen will go back to the standby mode wallpaper. 3. Select “YES” press , to display “Resetting”, which means the phone is retrieving some of the default settings. • When “Completed” is displayed it indicates that some of the default settings have been retrieved. • The items for which the default settings can be retrieved are: Functional Items Default settings Earpiece Volume Volume 2 Whisper OFF

Setting Up Your Phone 3-33 Functional Items Default settings Key Beep ON Manner Setting (Key Beep) OFF Manner Setting (Vibrator) ON Manner Setting (Volume) OFF Manner Mode OFF Vibrator (Call) OFF Vibrator (Alarm) OFF Vibrator (Schedule) OFF Vibrator (SMS/Mail) OFF Earphone Pickup OFF Melody Select (Call) Tone 1 Melody Select (Alarm) Tone 2 Melody Select (Schedule) Tone 3 Melody Select (SMS/Mail) Tone 4 Melody Select (Volume) Volume 3 Alarm OFF Anniversary Display ON Voice Mail OFF LCD Contrast 6 Sub LCD Setting (Call) Green Sub LCD Setting (Alarm) Red Sub LCD Setting (Schedule) Orange Sub LCD Setting (SMS/Mail) Orange Back Light ON Back Light Flashing Time 30 Seconds Talking Time ON LDS OFF LTS (LTS Alarm) OFF No ID Block OFF Custom function Deleted SMS in editing Deleted Mail in editing Deleted Sent Beep ON Phone book in editing Deleted Bookmark in editing Deleted 3.28 All Reset • You can use this function to retrieve all default settings. 1. Press , to display “Password” screen. 2. Enter the phone password. • The password you entered will be displayed as “****”. • If the password is correct, “Reset? Yes No” is displayed; if the password is incorrect, the phone will play the warning beep and “Invalid Password” will be displayed and the screen will go back to the standby mode wallpaper. 3. Select “YES” press .

UT618 User Manual • “Resetting” is displayed, which means the phone is retrieving some of the default settings. • When “Completed” is displayed, it indicates all the settings have been reset to their default values. � � � � Note: • “All Reset” function deletes all the data in the phone. All features will go back to the default settings. Therefore, if you have saved important information in the phone, do not use “All Reset” function. • The items for which the default settings can be retrieved are: Function Items Default settings Earpiece Volume Volume 2 Whisper OFF Key Beep ON Manner Setting (Key Beep) OFF Manner Setting (Vibrator) ON Manner Setting (Volume) OFF Manner Mode OFF Vibrator (Call) OFF Vibrator (Alarm) OFF Vibrator (Schedule) OFF Vibrator (SMS/Mail) OFF Earphone Pickup OFF Melody Select (Call) Tone 1 Melody Select (Alarm) Tone 2 Melody Select (Schedule) Tone 3 Melody Select (SMS/Mail) Tone 4 Melody Select (Volume) Volume 3 Melody Compose Deleted Alarm (ON/OFF) OFF Alarm (Alarm) Appoint Day Alarm (Once) 01/01 Alarm (Appoint Day) All ON Alarm (Time) 00:00 Alarming Time (length of time) 15sec. Snooze OFF Voice Memo None Voice Mail OFF LCD Contrast 6 Picture Deleted Sub LCD Setting (Call) Green Sub LCD Setting (Alarm) Red Sub LCD Setting (Schedule) Orange Sub LCD Setting (SMS/Mail) Orange Back Light ON Back Light Flashing Time 30 Seconds Talking Time ON LDS OFF LTS OFF LTS (LTS alarm) OFF No ID Block OFF Custom function Deleted

Setting Up Your Phone 3-35 Function Items Default settings SMS in editing Deleted Free Box (Rename) Free Box 1-3 Mail in editing Deleted Schedule None Anniversary None Sent Beep ON Sign OFF Air Info Text Omit Center Number (Online Sign Up) Preset Center Number (Mail) Preset Center Number (Air Info) Preset Center Number (Auto E-Mail) Preset E-Mail Setting (Send) Send E-Mail Setting (Receive) All Dialed Record None Incoming Record None 3.29 Custom Function • You can set your frequently used items from “Main Menu” and “OK Menu” to “Custom Menu”. When it is set, you can press to enter the custom function menu under standby mode. • You can set up to 9 functions in the menu. 3.29.1 Setting Custom Function 1. Press , to display “Custom Function” menu. 2. Press to select an unoccupied frame press . 3. Select the menu that has the function you want to include in the custom function menu press . 4. Press to select the function item. 5. Press , to display “Registered”, which means the function, has been set into custom function menu. 3.29.2 How to Use Custom Function 1. Press , to display “Custom Function” menu. 2. Press to select the function. • Press to enter the operational screen.

UT618 User Manual • You can also press corresponding numbers to enter the operational screen. 3.29.3 Deleting Custom Function Individually 1. Press , “Custom Function” menu appears. 2. Press to select the function you want to delete. 3. Press to display the sub menu. 4. Press to select “1 Delete One”, to display “Deleted”, which means the function, has been deleted from the custom function menu. 3.29.4 Deleting All Custom Functions 1. Press , to display “Custom Function” menu. 2. Select a function, press to display the sub menu. 3. Press to select “2 Delete All”, “Delete All? YES/NO” is displayed. 4. Select “YES” press , to display “Deleted”, which means all the functions have been deleted from the custom function menu.

4.1 Entering Text 4.1.1 Text Input Area • The Text input area can be categorized into sections for better understanding. Text 1 2 3 寿受授瘦售兽狩 Text ˋ shou 4 5 1. Input Method Area • This is indicated on the right margin of the title area. The user can select from the three options available, viz. Pinyin , English and numericals . 2. Text Display Area (16*16 dot) • This area will display the English text being entered. 3. Input Area • This area will display the Pinyin text being entered. 4. Word Selection area / Relevant Words Area • When you enter the first Chinese character in the input area, it will display words relevant to what you are entering. 5. Functional Key Indicator

UT618 User Manual • This is the last line of the screen, which indicates the functions of the keys. • When the input area and the word selection area/relevant words area are blank: • Press to display the sub menu. • Press to return to the previous step. • Press to go to the next step. • When there is text in the input area and the word selection area / relevant words area: • Press to return to the previous step. • Press to select a character and it will jump to the text area. • Press or to erase the related words. 4.1.2 Switching Input Method • The steps for entering text are as follows: Select “Input Method” Enter characters Confirm characters. • In the text entering area, you can toggle between input methods by pressing once. Pinyin English number • The input method selected is displayed at the upper-right corner of the main display.

Text Edition 4-3 4.1.3 Features Using Text Input Input methods Features Pinyin English number Schedule/Anniversary/(entering title), Phone Book (entering name and searching name), Melody Compose (entering title), SMS (entering text), Mail (entering text and subject), Air Info (entering text and subject), Sign, Free Box (Rename), Air Info, Online Sign Up � � � Entering phone number, Number Memo, Time Date, Password, Group No. � Entering E-Mail Address, Book Mark � � • When you enter phone number, number memo, time setting, password and group number, the image “ ” will not be displayed. • Keys for entering/editing text: Keys Functions : Move the cursor to the right side :Move the cursor to the left side Press Delete a character Delete the character at the cursor or to the left of the cursor Delete a character between characters After deleting a character, the remaining text will automatically shift to the left Press and hold Deletes all characters entered Confirm a character. ●When you enter English and numeric characters, they will be displayed directly on the display area. Carriage return (only can be used in Mail, Air Info and SMS) Chinese Tones. 4.1.4 Entering numbers, characters and symbols Keys Input Methods Input Characters Pinyin English Space @ . / : ;~ _ * # $ % ^ & \ | ‘ ,” “ number 1 Pinyin abc English abc ABC number 2 Pinyin def

UT618 User Manual Keys Input Methods Input Characters English def DEF number 3 Pinyin ghi English Abc ABC number 4 Pinyin jkl English jkl JKL number 5 Pinyin mno English mno MNO number 6 Pinyin pqrs English pqrs PQRS number 7 Pinyin tu English tuv TUV number 8 Pinyin wxyz English wxyz WXYZ number 9 Pinyin English + - = ? ! < > ( ) { } [ ] number 0 Pinyin / v \ · next line English pqrs PQRS number 7 Pinyin Edit (copy, cut, paste) English Edit (copy, cut, paste) number Edit (copy, cut, paste) 4.1.5 Input Method • When you press the keys the display will depend based on the input method selected. • Please refer to section “ Entering numbers, characters and symbols”. Example: Pressing multiple number of times with different input modes selected. 1 2 3

Text Edition 4-5 � � � � Note: • If you want to enter a character that is as the same as the previous one, or is on the same key as the previous one, please use to move the cursor then enter the second character. • After you enter the first character, press to move the cursor then enter the second character. • While entering text in English, if you want to know the various possible characters, numbers that the key supports, press and hold the key. All the characters will be displayed in turns. This feature is available only for English characters. 4.1.6 Entering Chinese Character 1. Switch to Pinyin method in text entering display, the cursor will be displayed in the input area. 2. Press ~ and , the related Pinyin symbol will be displayed in input area and the relevant words will be displayed in the word selection area. • You can delete incorrectly typed Pinyin symbols by pressing . • After you press ~ to input Pinyin, if the word you want to enter is not the first tone, you can press to select the tone in order to find the word. 3. Press or to move the cursor between the input area and the word selection area. Press to move the cursor to select the word. The word you select will have a black background. 4. Press to enter the word; the word you select will be displayed in test area. � � � � Note: 1 2 3 4 5 6 1 2 3

UT618 User Manual • When you enter the first character in the input area, the relevant words of what you are entering will be displayed. Select a relevant word and press . If you enter other characters directly, these relevant words will be erased. You can also press or to erase these words. • Pinyin method needs to follow its syllable rule; else the keys won’t work. For example, pressing after entering “W” will not work. 4.1.7 Entering English characters and Numbers 1. Press under text entering mode to switch between English and number input method. The cursor is displayed in the text area whereas the input area and the word selection area are blank. 2. Enter characters or numbers to be displayed in the text area. 4.1.8 Deleting Words and Sentences while Editing • Delete all words (SMS and Mail) 1. Press and hold , to display “Delete All?”. 2. Select “YES” press to delete all the words that are being edited. 4.2 Functions for Editing • The functions supported for editing are copy, cut and paste. • The maximum number of characters that can be copied and cut is 60 alphabets or 120 alphanumeric characters. 4.2.1 Copying Text 1. Display the screen that has the text you want to copy. • You cannot edit text from your SMS box. 2. Press to display the sub menu. 3. Press to select “Copy”, “Select the first letter” is displayed. 4. Press to select the first letter press . • After you select the first letter, “Select the last letter” appears. 5. Press to select the last letter. The letters you select will have a black background.

Text Edition 4-7 6. Press to complete. � � � � Note: • To paste the text, please refer to section “Pasting Text”. • The most recent copy or cut text will be available even if the phone is turned off. 4.2.2 Cutting Text 1. Display the screen that has the text you want to cut. • “Cut” function can only be used while editing text. 2. Press to display the sub menu. 3. Press to select “Cut”, “Select the first letter” will be displayed. 4. Press to select the first letter press , to display “Select the last letter”. 5. Press to select the last letter. The letters you selected will have a black background. 6. Press to cut it. � � � � Note: • To paste the text, please refer to section “Pasting Text”. • The most recent copy or cut text will be available even if the phone is turned off 4.2.3 Pasting Text 1. Display the screen that has the text you want to paste. • “Paste” function can only be used while editing text. 2. Press to display the sub menu. 3. Press to select “Paste”, “Select the Pasting Area” is displayed. 4. Press to select the beginning of the pasting area press . The text you copied or cut has been pasted. � � � � Note: • The most recent copy or cut text will be available even if the phone is turned off. The paste function can be used unlimited number of time.

UT618 User Manual 4.3 Marks 4.3.1 Entering marks 1. Press under text entering mode, to display the sub menu. • The items in the sub menu may be different due to different text. 2. Press , to display “Mark” list. Please refer to section “Mark List” for details. 3. Press to select a mark press for the selected symbol to move to the text area. 4.3.2 Mark List

Text Edition 4-9 � � � �Note: • If you send “Marks” to a computer or a different model phone, some of them may not be displayed correctly. • Please refer to the phone display for the exact symbols. 4.4 Emoji 4.4.1 Entering Emoji 1. Press under text entering mode to display the sub menu. • The items in the sub menu may different due to different text. 2. Press , to display “Emoji” list. Please refer to section “Emoji List”. 4. Press to select an “Emoji” press to move the “Emoji” to the text area.