TriMark e-PAD Manual 

e-ASK Keyless-entry System Installation & Instructions CCAANN M Muullttiipplleexx SSyysstteem m 4 6 June 2008

Introduction .............................................................................................3 Cargo e-FOB Operation and Features ..................................................3 Non-doorbell e-PAD Operation and Features ......................................4 Locking doors with keypad ...................................................................4 Secure Operations................................................................................4 e-ASK CAN DIP Switch Configuration –...............................................5 Additional Features.................................................................................5 Dome/Porch Light Activation ................................................................5 e-PAD Anti-tamper Deactivating Feature .............................................5 Trim Pot Variable Resistor...................................錯誤! 尚未定義書籤。 Keypad Learn Wire...............................................................................6 Status LED............................................................................................6 Miscellaneous I/O Module Features.....................................................6 Door locking and unlocking ..............................................................6 Timed Dome/Porch Light Activation ................錯誤! 尚未定義書籤。 Teaching Additional Transmitter Fobs .................................................7 Teaching Keypad New Authority / Access Codes ...............................9 Assign New Access Codes.................................................................10 Wiring Assignments……………………………………………………..…11 Troubleshooting....................................................................................12

and use of TriMark’s CAN e-ASK system. The e-ASK system comes with the following components: • e-FOB (keyless entry radio frequency [RF] FOB transmitter and receiver) • e-PAD keypad user interface e-FOB Operation and Features Button Function Entry Lock Locks entry door and arms security system. Entry Unlock Unlocks entry door and activates the porch light. Note: • The FOB transmitters and receiver are shipped programmed. After making all necessary wiring connections (see page 11 for wiring information), the e-FOB system will function as shown.

The e-PAD is shipped with default authority and access codes. Unless the OEM or dealer has changed default codes, the authority and access codes are as follows: Access code: Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 1/2 3/4 5/6 7/8 9/0 Authority code: Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 7/8 7/8 7/8 7/8 7/8 Locking doors with keypad Press and hold down the (1 / 2) or (1) button for 1-2 seconds. An access code is not needed to lock the doors. Secure Operations Entering a valid 5-digit access code enables secure operations. After entering an access code, the keypad is enabled for 5 seconds and an additional button press initiates a secure operation, such as unlocking the doors. Notes: • The authority code does not allow for secure operations. It is only used to assign access codes (see page 9 for information on setting access codes). • If an unassigned button or no button is pressed while the system is enabled, the keypad reverts back to disabled state. • The secure keypad operations are set depending on the system configuration.

• DIP switches 1-3: The settings of DIP switches 1-3 define CAN address of the IO RF receiver module. The setting a unique address is required if multiple modules are used on CAN network. If only 1 module is used on network then all DIP switches should be set to default ON position. • DIP Switch 1: On • DIP Switch 2: On • DIP Switch 3: On • DIP switches 4-6: The setting of DIP switches 4-6 define configuration of the IO RF receiver module. Different configurations of provide different functionality for keypad and interior switches. Spartan’s setting is as follows: • DIP Switch 4: On • DIP Switch 5: Off • DIP Switch 6: Off • DIP switch 7: The setting of DIP switch 7 defines the type of remote fob transmitter, either standard fob or cargo fob. Spartan would have this DIP switch on. • On: Cargo fob • DIP switch 8: The setting of DIP switch 8 defines the type of CAN protocol, either RV-C or SAE J1939. Spartan would have this DIP switch on. • On: SAE J1939 Additional Features Dome Light Activation The dome light is activated for a timed duration (20 seconds) whenever the system is unlocked from keypad or FOB transmitter. e-PAD Anti-tamper Deactivating Feature After repeated attempts to enter incorrect codes (20 button presses without enabling), the keypad enters an inactive mode that disables button for 1 minute. This helps prevent undesired access by entering random