Audio Pro BASIQ Sub Specifications

Green light = ON Red light = OFF or Standby 2) Mains switch OFF / AUTO or ON 7) Volume control 8) Speaker level input WARNING ! To reduce the risk of electric shock, do not open or remove cover or back. Do not expose this appliance to rain or moisture. In case of malfunction consult qualified service personel. The exclamation point, within an equilateral triangle, is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product´s enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to persons. 3) Line input 4) Fuse 5) Mains cord (230V) 6) Lo-Pass crossover (variable 50Hz - 150 Hz) English CONTROLS AND INDICATORS 6
 
       
 
 
  
   

 
       
    
 
  
    
   
   ! " # $%& '( !)% *)(        + 
+   
,
 ,      +   
  
 + + -. /-.    0  
1
2.. 3 45.+67-.0 -. 


 
1  1


    
        

(High level) Connect speaker wires from the speaker terminals of your amplifier/receiver to the Speaker Level input on the subwoofer amplifier. Carefully check the polarity of the wires (+ to + and - to -). Connect both Left and Right channels. The satellite speakers are connected to the main amplifier as usual. INSTRUCTIONS Congratulations to your choise of Audio Pro subwoofer and to a new sound experience. Audio Pro subwoofer is a unique product built with advanced technique. It is very easy to handle and install. It is equipped with a built-in amplifier and a long throw woofer. Together with the extremely solid cabinet , the subwoofer offers a natural and deep bass reproduction at sound levels you never thought existed. The Audio Pro subwoofer offers extraordinary performance and lots of possibilities. In order to get the most out of your new subwoofer, we recommend you to spend time and carefully read these instructions before you connect and start up your system. 2. INSTALLATION There are different methods to connect your subwoofer to a HiFi / Home Theater system. In the following we explain 2 different ways. NOTE! Do not connect the mains cord until all other installation is completed. 2.1 To an amplifier / pre-amplifier with Subwoofer-out terminal. Connect the enclosed wire from your amplifiers subwoofer-out terminal to LINE IN on the subwoofer. The audio signal is passing through the cord from the subwoofer-out terminal to the built-in amplifier. By using the LO-PASS control, the upper frequnency of the subwoofer can be variably selected from 50Hz - 150Hz. Note: Connect the satellite speakers to the main amplifier speaker terminals. 1. UNPACKING Carefully unpack the Audio Pro subwoofer and check for any damages. If possible, keep the cartonbox if future transportation is needed. You should immediately contact your dealer if the subwoofer is damaged . 7

To switch the subwoofer amplifier to ON, AUTO or OFF mode. Make sure that the power cord is not connected to the outlet during installation. AUTO MODE: The amplifier goes automatically into standby mode if no signal been detected in 15 - 20 minutes. It goes on automatically if signal is detected. ON MODE: The amplifier will be constantly ON. OFF MODE: The amplifier is off but not totally off. Diconnect the power cord from the outlet if it will not be used for a period of time. Main Power indicator: (1) Green light indicates the subwoofer is ON. Red light indicates that the subwoofer is either in Standby or OFF mode. The red indication will be lit off when the power cord is disconnected. Volume control (7): The sound level of the subwoofer can be adjusted. Use the Level control carefully, remember that program material may contain very high energy. LowPass (6): The Lowpass crossover frequency can be adjusted variably between 50 and 150Hz. This gives you a unique possibility to perfectly match the Subwoofer to your satellite speakers and to your preference.
 
       
 
 
  
   

 
       
    
 
  
    
   
   ! " # $%& '( !)% *)(        + 
+   
,
 ,      +   
  
 + + -. /-.    0  
1
2.. 3 45.+67-.0 -. 


 
1  1


    
        

woofer function, please check the below point. If the problem remains after checking, please contact your dealer. 1. Check that all connections have been made properly. Check if any of the wires or connectors are damaged or short-cirquit. Your Audio Pro subwoofer is designed to produce music information in the frequency range below 150 Hz. The human ear is being devoided the ability to localize sound of these low frequencies why the placement of the sub- woofer is not critical. Audio Pro subwoofers steep lowpass filters make the placement easier to fit into your listening room. However you can use the nature of the acoustic laws in the following ways: 1. To get the most amplification of the room itself, place the subwoofer close to a corner at a distance of about 10 cm from the walls. If you get to much bass, move the subwoofer slightly out from the corner or adjust the level. 2. By experimenting with the placement of the subwoofer, you can optimize the sound quality. One good rule is to place the subwoofer at the same wall as the satellite speakers. 3. Never cover the subwoofer or place it where the built-in amplifier will be covered. 6. TECHNICAL SPECIFICATIONS Amplifier(RMS):.....................................100 Watt Woofer:.................................................................8" Frequency range:...................................29-200Hz Lowpass filter:.......................................50 - 150Hz Dimensions: (W)..................................320 mm (H)...................................320 mm (D)...................................320 mm Weight:(net):.................................................9,0 Kg Specifications may be changed without notice, Audio Pro follows a policy of continous advancement in development English 9