Viqua Sterilight Platinum P410-HO Owner's Manual

The UV sensor is an extremely sensitive and fragile instrument. Extreme care is required when handling and cleaning. The sensor window itself is constructed from quartz which is extremely fragile, be careful you do not chip or break this quartz window. Manufacturer’s warranty does not cover damage due to neglect or misuse. 1. Mineral deposits and sediment may accumulate on the sensor window decreasing the UV energy detected. Good maintenance of pre-treatment equipment will reduce the accumulation of residues. If the system indicates that the UV intensity ...

t. (+1) 519.763.1032 • tf. 1.800.265.7246 (US and Canada only) t. +31 73 623 8116 (Europe only) • f. (+1) 519.763.5069 e-mail: [email protected] www.viqua.com Note: NSF Information pertains only to the SPV-200, SPV-410, SPV-600, SPV-740, and SPV-950 models. This Class A system conforms to NSF/ANSI 55 for the disinfection of microbiologically contaminated water that meets all other public health standards. The system is not intended to convert wastewater or raw sewage to drinking water. The system is intended to be installed on visually c ...

exceeded 40˚C (104˚F). • When the water temperature exceeds the maximum rating, the controller will indicate a unique type of indicator by flashing the default logo screen between green and amber colours. By pressing the green/amber flashing screen, the display will change to solid amber with the letters “OT” to give explicit indication of the “Over-Temperature” condition. • If this over-temperature condition has been caused by extended time periods of no w ...

exceeded 40˚C (104˚F). • When the water temperature exceeds the maximum rating, the controller will indicate a unique type of indicator by flashing the default logo screen between green and amber colours. By pressing the green/amber flashing screen, the display will change to solid amber with the letters “OT” to give explicit indication of the “Over-Temperature” condition. • If this over-temperature condition has been caused by extended time periods of no w ...

exceeded 40˚C (104˚F). • When the water temperature exceeds the maximum rating, the controller will indicate a unique type of indicator by flashing the default logo screen between green and amber colours. By pressing the green/amber flashing screen, the display will change to solid amber with the letters “OT” to give explicit indication of the “Over-Temperature” condition. • If this over-temperature condition has been caused by extended time periods of no w ...

exceeded 40˚C (104˚F). • When the water temperature exceeds the maximum rating, the controller will indicate a unique type of indicator by flashing the default logo screen between green and amber colours. By pressing the green/amber flashing screen, the display will change to solid amber with the letters “OT” to give explicit indication of the “Over-Temperature” condition. • If this over-temperature condition has been caused by extended time periods of no w ...