Viking Range RVRF336 Series Installation Manual

Side Trim and Top Grille Kit GKRVRF1SS STKRVRFSS

GKRVRFSS Top Grille Kit Parts included in STKVRFSS Top Grille Kit Screws (4) Right Spacer Left Spacer Grille Washers (2) For installing side spacers Left Shim Trim Right Shim Trim Left Side Trim Right Side Trim Installation - GKRVRFSS (Top Grille without side trim) 1 s t e p B 2 Attach spacers, included in the kit, to the grille assembly with four screws. DO NOT install spacers if installing the side trim. Align and position grille on top of unit so that the face of the grille and the face of the door are fl ush. These surfaces must be flush Grille Door Side View 3 Remove plastic caps from the top hinges by removing (3) 1/4” hex head screws. Save these screws to replace plastic caps. Use the two inner hole locations to properly align the grille. 4 Place plastic caps back on top of hinges and located exisiting holes. Insert screws making sure the grille is centered. Use washer when replacing screw in rear hole of plastic cap. Tighten all hex screws 5 6 Alcohol Swab Alcohol Swab Alcohol Swabs (2)

Installation - GKRVRFSS and STKVRFSS (Top Grille and Side Trim) 2 71-7/8” (182.6 cm) 3 2 2 1 4 2 2 1 complete Raise the unit up until the measurement from the fl oor to the top of the grille assembly is 71-7/8 inches. Shim trim has adhesive backing on both sides. Remove adhesive backing on refrigerator side only. Fit the shim trim to the front of the unit fi rst. With center hinge, the shim trim will have a cutout. Use the cutout to locate the height of the shim trim. Remove adhesive backing for the side trim. Locate the top of the side trim with the top of the grille assembly. Press the side trim into the refrigerator cabinet at the center location. Specifi cations Freestanding Refrigerators Description RVRF336* Overall height with grille 71-7/8” (182.6 cm) Cutout height with grille 72” (182.9 cm) Before installing the side trim, install the grille assembly without the side spacers. Use alcohol swabs to clean areas of refrigerator cabinet and inside of side trim to ensure adhesive backing adheres to cabinet and side trim. 1 s t e p

111 Front Street Greenwood, Mississippi 38930 (662) 455-1200 For product information, call 1-888-845-4641 or visit our web site at vikingrange.com in the US or brigade.ca in Canada 057682-000B EN (091217)