VendCo KARISMA Installation - Use - Maintenance

52 02-2014 4535 00 boilEr ThErmal ProTEcTioN in case of intervention of one or more thermostats the cause of failure should be identified and elimi- nated. The recovery of the thermostats must be done manually through the button placed on the thermo- stats themselves. In case of intervention of the thermostats, in the ab- sence of water, the boiler and control components may be damaged. EsprEsso boilEr the espresso boiler has a capillary safety thermostat, which deactivates the boiler resistance in case the temperature in the boiler exceeds the safety temperatur ...

46 02-2014 4535 00 NozzlEs To clean the nozzles, proceed as follows: - bring the telescopic nozzle in lower position lowering the handle. - remove the cover and disconnect the beverage hoses - rotate the flow divider coffee nozzle 45° towards your- self, in order to lift it off the nozzle support - remove the flow divider, the milker nozzle (if present) and the instant beverages nozzles. - For models with cappuccino maker, separate all the parts of the milker nozzle and check the state of wear of the seals, replacing them, if necessary - proceed with the ...

conforme alle disposizioni legislative delle Direttive Europee elencate a lato e suc- cessive modifiche ed integrazioni. English The machine described in the identification plate conforms to the legisla- tive directions of the European directives listed at side and further amendments and integrations English The harmonised standards or technical specifications (designations) which comply with good engineering practice in safety matters in force within the EU have been applied are: Français La machine décr ...

18 02-2014 4535 00 solid aNd liquid rEsiduEs dischargE Where possible, you should discharge the solid resi- dues into bucket and connect the liquid residue con- tainer to a standpipe. liquiD rEsiDuEs connect the liquid residue container to a standpipe us- ing the drain connector that plugs into the liquid residue container When this is not possible, it is preferable to use a bucket to collect the residues from the tray. to connect the liquid residue container to the drain con- nector, drill the liquid residue container in the area of the drain connector Make sur ...