youview DTRT1000 Setup Manual

This booklet has all the information you need to connect your YouView box in four easy steps. If you’d like more help, a set up video and interactive diagrams are available at youview.com/support If you’d like to stay up to date with all the latest developments and news, please register your details at youview.com 01

Aerial connection receives digital TV signal from aerial Ethernet connection connects YouView box to the internet for access to On Demand and Catch Up services* HDMI connection high definition connection from YouView box to the TV Power supply Power cable attached Aerial cable (not supplied) Ethernet cable (supplied) *Please note: watching on demand and catch up TV will count towards any monthly broadband data allowance you may have, please check with your broadband provider HDMI cable (supplied) Overview Connections and cables 04 05

to connect your YouView box to an aerial wall socket Step one Connect to the aerial with the aerial cable Aerial cable (not supplied) 06 07

Important: if your TV is an analogue set you will need to connect your YouView box using the scart ports and the scart cable AERIAL IN SCART AUDIO Back of TV 08 09

Connect the ethernet cable to an available connection on your broadband router Step three Option one - connect to the router with the ethernet cable OFF ON POWER LAN LAN LAN Please note: if you’re router is more than 2 metres away from your box you may want to connect using a longer ethernet cable. If your router is in a different room you may want to connect using powerline adapters - please turn over for details on how to do this 10 11

YouView box Powerline adapter (not supplied) Ethernet cable to an available connection on your broadband router Step three Option two - connect to the router using powerline adapters Please note: Powerline adapters can be purchased from an electrical retailer. Please follow the manufacturer’s guidelines when installing Modem or internet router OFF ON POWER LAN LAN LAN 12 13

switch at the back. To control your YouView box press the PVR button at the top of the remote first and then press the Standby button Power cable Step four Plug cable in and switch on 14 15

and all cables are correctly connected to your YouView box Switch on your TV, choose ‘source’ or ‘input’ on your TV remote control and select the HDMI* option which matches the port number on the back of your TV The box will need 2 minutes to get to the first screen - shown on the right Follow the on screen instructions using the arrow keys to move the blue highlight, to tune your TV and radio channels and to connect your box to the internet On screen set up Checklist * Select AV input if connected via scart cable. Got a question or need more help with your YouView box? The team at Humax will be happy to help. Here’s how to contact them: tel: 0844 669 8800 hours: Mon-Fri 09:00-17:30 email: [email protected] website: www.humaxdigital.com/uk Customer Support YouView service requires broadband connection. YouView service subject to terms of use and suitable broadband speed, TV aerial and coverage, see www.youview.com for details. YouView design, user interface, specifications and content services available on YouView subject to change without notice. Software contained in this device is licensed on a limited basis. All other rights reserved. YouView and the YouView logo are registered trade marks of YouView TV Limited and are used under licence. (c)YouView TV Limited 2012. All logos and content images are trademarks and/or copyright of their respective owners. For any other questions about YouView services, please see the User Guide or go to www.youview.com/support 16 17