cineVision RV4000 Quick Start

...OR... 2 Connect 3 Setup TRACKING 1 2 3 4 5 6 7 8 0 9 TV VIEW 100+ CLEAR INPUT CH+ CH- SETUP MENU TIMER EDIT ENTER SLOW- SLOW+ NEXT PREV PLAY/PAUSE FF REW STOP REC SPEED DISPLAY SEARCH SUBTITLE AUDIO TITLE CLEAR ANGLE REPEAT A-B ZOOM P.SCAN REC POWER EJECT VCR DVD Quick Start 1 Connect the unit to your TV and antenna/cable as shown. 2 Turn on the DVD Recorder+VCR. 3 Turn on your TV and set it to channel 3. • Use the , , ,  and ENTER keys on the remote control to complete Initial Setup as shown below. DVD Recorder + VCR Remote Control Audio/Video Cable RF (Coaxial) Cable Registration Card & User’s Guide Blank Disc 2 AAA Batteries Welcome to the RV4000 Quick Start Guide—the fastest way to get started using your DVD Recorder+VCR. Just follow these easy steps, from unpacking and setting up to making your first recording. If for some reason you need additional help, please make sure you have followed every step in this Quick Start and have referred to the User’s Guide before calling customer service. 1 Connect the unit to your TV and cable box/satellite receiver as shown. 2 Turn on your TV and set it to channel 3. 3 Turn on your Cable Box/Satellite Receiver. 4 Turn on the DVD Recorder+VCR and follow Initial Setup below. RV4000 DVD Recorder + VCR POWER REC CH VCR EJECT DVD ONE-TOUCH COPY DUAL RV4000 DVD RECORDER +VCR DVD EJECT Unpack 1 Do you have an Antenna or Basic Cable? Do you have a Cable Box or Satellite Receiver? Follow the instructions on this panel. Follow the instructions on this panel. Use this cable in step 2 S-VIDEO OUT OUT DIGITAL AUDIO OUT AUDIO OUT OUT COMPONENT R LINE IN 2 L AUDIO VIDEO L R COAXIAL Y Pb Pr RF OUT ANT. IN DVD & VCR OUT Antenna/ Cable Wall Outlet S-VIDEO OUT OUT DIGITAL AUDIO OUT AUDIO OUT OUT COMPONENT R LINE IN 2 L AUDIO VIDEO L R COAXIAL Y Pb Pr RF OUT ANT. IN DVD & VCR OUT Cable Box/ Satellite Receiver Antenna/Cable Wall Outlet IN OUT AUDIO S-VIDEO VIDEO L R OUTPUT RF If you are using a Cable/Satellite Receiver... Auto Search will detect the output channel of your receiver. Select channel 2, 3, or 4 on the DVD Recorder+VCR to view the receiver, and then use your receiver’s remote to select the desired channels. Installation Please select your language to begin auto install procedure: English Spanish French Instructions Enter-Confirm Setup-Exit Move Installation Welcome. Press [Enter] to begin auto channel search. Ensure antenna is connected. Instructions Setup-Exit Also set Audio & Subtitle Languages. Installation What type of signal are you using? Cable TV Antenna Detect Automatically Instructions Enter-Confirm Setup-Exit Move Installation Searching for available TV stations: 2 channels found Please wait... Instructions Setup-Exit Set Clock Please set the clock: Time : 12 : 00 AM Date : Jan / 01 / 2005 (SAT) Instructions Enter-Confirm Setup-Exit Move    Installation Please select disc menu language: Default English Spanish French Italian Japanese Chinese Instructions Enter-Confirm Setup-Exit Move INPUT CH+ CH- SETUP MENU EDIT ENTER DISPLAY

Finalize Your Disc So it Plays on Other DVD Players Make Your First DVD Recording If you want your recorded discs to be compatible with other DVD players, you will need to “finalize” them: 1 Press MENU to display the disc menu. 2 Press  to go to the top menu. 3 Press  to display the “Information” menu. 4 Press  repeatedly and select “Finalize” for a DVD+R, or “Make Compatible” for a DVD+RW. 5 Press ENTER. 6 Select “Yes” and press ENTER to finalize the disc (or make the disc compatible if it is a DVD+RW). 7 Press ENTER again. 8 Press SETUP to go to the top disc menu. • Once you finalize a DVD-R you cannot record anything else on the disc. • Disc finalization may take a few minutes to complete. • The disc will now play on most DVD players. Finalize Press [Enter] to make any previous title editing compatible with your DVD player. Instructions Enter-Confirm Finalize Make disc compatible with your DVD player. Yes No Instructions Enter-Confirm Move …† Finalize Finished. This Disc should already be compatible. ok Instructions Enter-Confirm Move …† DVD+R disc Make Compatible Press [Enter] to make any previous title editing compatible with your DVD player. Instructions Enter-Confirm Make Compatible Make disc compatible with your DVD player. Yes No Instructions Enter-Confirm Move …† Make Compatible Finished. This Disc should already be compatible. ok Instructions Enter-Confirm Move …† DVD+RW disc 5 Finalize Disc ©2004 CineVision. All rights reserved. Printed in Korea. “Dolby”, “Pro Logic”, and the double D symbol are trademarks of Dolby Laboratories. The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The “KODAK Picture CD Compatible” logo is a trademark of Eastman Kodak Company and is used with permission. All other brand and product names are trademarks or registered trademarks of their respective companies. POWER PLAY/PAUSE STOP REW FF DVD • VCR RV4000 DVD RECORDER + VCR REC DVD EJECT CH VCR EJECT VCR DVD DVD VCR ONE-TOUCH COPY DUAL OPEN Follow these steps to make your first DVD recording using the supplied disc: 1 Insert the supplied blank DVD disc into the disc tray. • The disc is initialized automatically when the tray is closed. This may take a few minutes to complete. 2 Press CH+/- to select the channel to record. • If using a cable box or satellite receiver, set the DVD recorder to Channel 3 and select the desired channel on your box/receiver. 3 Press REC to start recording. 4 Press STOP to complete the recording. • The disc is updated with the new recording and the new title is added to the Disc Menu. This may take a few minutes to complete. 5 To watch your recorded show, press MENU, select the thumbnail of the desired title, and press ENTER. Copy a VHS Tape to DVD 1 Load your source tape in the VCR deck. 2 Load a blank disc in the disc tray. 3 Press VCR on the remote control to select VCR mode. 4 Cue your tape to the start of the scene you wish to copy. 5 Press VCRDVD on the front panel. The “Copy to Disc” menu appears. To archive a VHS tape to DVD: If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not permitted to copy Macrovision encoded tapes. DVD COPY 00:00:32 02:03:27 TAPE COPY Copy to Disc Choose quality then press COPY: HQ SP EP SLP DVD Status Stop 0 : 00 : 10 6 Press REC SPEED to select the desired Record Mode: • HQ (1 hr/disc) • SP (2 hrs/disc) • EP (4 hrs/disc) • SLP (6 hrs/disc) 7 Press VCRDVD again to start copying. 8 Press STOP at any time to stop copying. • Copying will stop automatically when the VHS tape ends. www.cinevision1.com customerservice@ cinevision1.com 800.736.7679 Record from Camcorder 1 Connect your camcorder to the front panel A/V jacks as shown. 2 Press CH+/- to select “LINE 1”. 3 Cue the camcorder to the start of the scene you wish to record. 4 Load a blank recordable disc. 5 Press REC to start recording. • Recording continues until you press STOP or the disc is full. 6 Press STOP to stop recording. To record your home movies direct to DVD: REC CH DVD RECORDER +VCR DVD EJECT L – AUDIO – R LINE IN 1 VIDEO Camcorder Jack Panel DVD Recorder+VCR Other Cool Features If you would like personal assistance making your first recording, call us and we'll walk you through it. Free.