Wilan LIBRA 5800 CPE Operation & User’s Manual

114 Libra 5800 Series User Guide MAC Layer Statistics Node Label Object ID Type Access Description etherRxFrame s 1.3.6.1.4.1.2686.1.4 .1 Counter Read-only Total Frames Received stackRxEther 1.3.6.1.4.1.2686.1.4 .2 Counter Read-only Frames For Local Host etherRxFrame s 1.3.6.1.4.1.2686.1.4 .1 Counter Read-only Total Frames Received stackRxEther 1.3.6.1.4.1.2686.1.4 .2 Counter Read-only Frames For Local Host etherRxErrors 1.3.6.1.4.1.2686.1.4 .3 Counter Read-only Receive Errors etherRxDroppe d 1.3.6.1.4.1.2686.1.4 .4 Counter Read-only Frames Dropped etherTxFrames 1.3.6.1.4 ...

155 We are interested in your comments. Please contact us by email at [email protected] if you have any comments about this user guide. Product Code:5720-3005-00 June 2003 Rev 0 Libra 5800 Series User Guide 5720-3005-00 June 2003 Rev 0 ...

150 Power Inserter, Ethernet 21 Power/Ethernet Port 20 Powering up the unit 32 power-on settings restoring 62 P-P Systems 18 pps = field 129 private community names 37, 52 problem logging 97 processing errors troubleshooting 100 propagation loss defined 141 pseudo-random data and Link Test 119 public community name 37, 52 put command downloading new image files to unit 104 Q QAM 16 35, 40 QPSK 35, 40 Quality of RF links troubleshooting 98 quit command 87 R R (Link Test Result) 122, 130 radio frequency 142 hardware troubleshooting 98 troubleshooting 99 Radio Configuration 70 men ...

33 Quick-Start Menu When the Libra unit starts up for the very first time, it will start up in setup mode. This a single screen as shown below that displays all of the parameters that the user needs to set up the unit and get it talking with the base station. Many of the fields on this menu can be found in more detailed menus as discussed later on in this section. Exiting Setup When the setup procedure is complete and the unit has been re-booted to activate all the changes you can exit the setup procedure. ➧ To exit setup 1. Move the cursor to the Exit setup ...

Note: If you turn on IP filtering and want to allow broadcast traffic to flow through the unit, enter the IP Broadcast address into the list; i.e. Host/Net Address = 255.255.255.255 and Host/Net Mask = 255.255.255.255. ➧ To configure the remote IP filter 1. Follow the procedure in the previous section to enable IP Filtering Option by setting it to Filter. 2. Select On in the filter row you are defining and press Enter. The entry field highlights. 3. Use the arrow keys to select the desired filter type where Filter A numbered list of the filters ...

➧ To change the user password 1. From the Main System Menu, select System Security and press Enter. The System Security menu appears. 2. Select Change User Password and press Enter. The entry field changes to the edit mode, meaning the field is highlighted in black and you can change the text there. 3. Type the new password and press Enter. ...

118 Libra 5800 Series User Guide CPE (for P-MP) or Remote (for P-P) Information CPE Configuration Information Path Information Site Information Antenna and Cable Requirements IP Address: Sector ID: Subnet Mask: Synch ID: Station Type: Remote Rx Center Frequency: RF Station ID: (P- MP only) LOS Availablility Distance to Base Station Fresnel Clearance Required (m) Calculated Fade Margin Measured Fade Margin Environment/Shelter AC Power Grounding Ethernet access Notes: Antenna Type Model Antenna Mounting Location Transmission Cable Type Length (m) Notes ...