Zebra DS3678-ER scanner programming guide for Mobile Bale Scan
1. Reset the scanner to Factory Defaults
2. Set the Bluetooth PIN code to Variable
3. Enable Bluetooth HID
4. We need each scan to end in a ‘.’ so that we know to advance to the next field. Scan both barcodes:
Scan Suffix
Then scan the following in order (1046):
5. Enable Bluetooth on your mobile device and tell it to search for devices. You should see something similar to
DS3678-M1L06T47Y show up in the list. The device name may vary depending on the scanner. Select it to pair to the
scanner. If you are prompted to enter a key, scan the barcodes on the following page that match the key presented
on your device, followed by the Save barcode.
