SMART-AVI SPS-1000 Quick Start Manual

Switch with Integrated Scaler Quick Start Guide 4-port HDMI, 2-port VGA, DVI and composite video switch with IR and stereo audio support (325 foot signal extension) GENERAL Video Input (4) HDMI, (2) VGA, (1) DVI, (1) Composite Control (1) RS-232, (1) RJ-45, (1) IR 3.5mm Audio Input (7) 3-Pin Phoenix Connector Video Output HDMI (local), RJ-45 (remote) Audio Output RCA, SPDIF Digital Coaxial Video Resolutions Up to 4K (3480x2160 @ 30Hz) TECHNICAL SPECIFICATIONS PHYSICAL Dimensions 17.25”W x 1.9”H x 7.85”D Weight 5 lbs. Operating Temp. 0° - 40° C Storage Temp. -20° - 60° C Relative Humidity 20%-90% (no condensation) Power Consumption 14W (max)/1.8W (standby) 800.AVI.2131 Tel: (818) 503-6200 | Fax: (818) 503-6208 11651 Vanowen St. North Hollywood, CA 91605 SmartAVI.com NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc. PART NO. QTY DESCRIPTION SPS-1000-S 1 8-Port Multi-Platform Presentation Switcher SPS-RXS 1 Receiver over CAT5e/6/7 PS12VDC 1 Power Supply / Adapter PS5VDC 1 Power Supply / Adapter Quick Start Guide 1 Installation Setup/Part listing WHAT’S IN THE BOX SPS-RX Dimensions 4”W x 1”H x 4”D Weight 0.8 lbs. Operating Temp. 0° - 40° C Storage Temp. -20° - 60° C Relative Humidity 20%-90% (no condensation) Power Consumption PS5VDC or POE (Ethernet)

control options to fit virtually any application. With RS-232 and LAN connections, users can control the device from a remote laptop. (The SPS-RX receiver unit is equipped for both RS-232 and LAN signals, as well.) The SPS-1000 also features front-panel buttons for easy switching right from the device itself, as well as an IR re- mote to switch between inputs and manage other basic functions. FEATURES  Eight video inputs, including four HDMI inputs, two VGA inputs, one DVI input and one RCA input  One local HDMI output, with one local SPDIF digi- tal coaxial audio output and one local RCA stereo audio output  Up to 325 feet of signal extension over Cat5e/6/7 cables with receiver unit using HDBaseT technology and POE (Power over Ethernet)  Scales output resolutions up to 1080p  Two HDMI ports with bypass to support 4K Ultra HD input and output  Supports control via: RS-232, IR remote, front- panel buttons, and TCP/IP  Seven Phoenix audio ports for each of the digital video inputs, with automatic audio embedding  Supports SPDIF and stereo audio CONNECTING THIS PRODUCT 1. Turn off all devices. 2. Connect signal source devices to the SPS-1000 switcher’s appropriate input ports (HDMI, DVI, VGA, etc…). 3. Connect SPS-1000 to local display via HDMI AND/OR SPS-RX with RJ-45 CAT5 cable. **OPTIONAL: Connect SPS-1000 to stereo audio output device via 3.5mmm audio jack.** **OPTIONAL: Connect SPS-1000 to computer via RS-232 cable for additional command support.** 4. Power on signal source devices. 5. Power on display (remote or local). 6. Connect SPS-1000 to power device and turn it on. FRONT BACK INSTALLATION DIAGRAM