ReelCraft 5600 ELS Operating Instructions

the back of this bulletin. 2. Remove all spring tension before beginning dissassembly process. SAFETY Operating Instructions Series 5000 Spring Driven Hose Reels Low Pressure Model Numbers: Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605 Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com Form# 935-198 Rev: 3/2018 Dimensions A 18 1/2” B 15” C 9 3/4” D 2 1/2” E 7” 5600 ELS 5600 ELS-S RECOMMENDED MAINTENANCE It is recommended to disassemble, inspect and re-lube the swivel every 3 months. Disassemble, wipe off and inspect the swivel body and stem for any evidence of galling on the metal-to-metal contact (bearing) areas. If evidence of galling is found, the swivel should be replaced. If the swivel shows no evidence of galling, re-lube the swivel with anti-seize lubricant on the bearing areas of the swivel components and reassemble the components. The swivel should be pressure tested to insure the O-rings are seated properly and that there is no evidence of leaking. Attach the swivel assembly to the reel and test the hose reel assembly for leaks at the threaded connections. It is up to the customer to insure that the lubricant used is compatible with the media they are running through the hose reel assembly. INSTALLATION: A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible misalignment and binding. LUBRICATION: Hose reel spring and bearings are factory lubricated and require no further lubrication. REPLACING HOSE: 1. Remove 1/4-20 hex nuts (4) which fasten the hose guide enclosure to the reel back cover and pull off the enclosure. 2. Wind spool flange clockwise-facing swivel-until spring is tight. 3. Back off three turns and latch. 4. Insert hose through roller guide. 5. Connect hose fitting to swivel joint and secure hose with clamps. ADJUSTMENTS: To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is obtained. REPAIRS: Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may void your warranty. Remove all spring tension before beginning disassembly process. MOUNTING: The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing the 1/4-20 hex nuts (4) fastening the hose guide enclosure to the reel back cover. Shift the hose guide enclosure to the desired position and replace the 1/4-20 hex nuts. NOTE: For proper installation in wall mount applications, ensure reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause latching issues.

Page 2 www.reelcraft.com Item # Part # # Req. Description Item # Part # # Req. Description Item # Part # # Req. Description 1 600658 1 Case & Cover Assembly 11 S260648 1 Spring Arbor 23 S400018 1 Latch Spring 2 S46-105 4 10-32 x 3/8” Screw 12 261323 1 Reel Cover 24 S46-107 7 10-32 x 1/2” Screw 3 S160-3 1 90° Street Ell 13 S96-13 6 1/4-20 Nyloc Nut 25 S260225 1 Latch Bushing 4 600093-2 1 Swivel Assembly** 14 600056 1 Base Assembly 26 400020 7 O’Ring 4 S602681-2 1 Swivel Assembly 15 S504240 1 Drive Spring Assembly 27 S600062 1 Latch Plate Assembly 5 S147-25 2 1” Snap Ring 16 261361 1 Spring Case Stud 28 300035 1 10-32 x 1” Mach. Screw 6 260238 4 Spacing Washer 18 S47-66 1 3/8-16 x 1/2” Set Screw 29 260242 1 U-Bolt 7 S324-102 3 1/4-10 x 5/8” Hex Screw 19 260239 7 10-32 Hex Lock Nut 31 260227 1 Main Shaft** 8 260221 1 Sheave Flange 20 S95-22 1 10-32 x 3/8” Nyloc Nut 31 S262922 1 Main Shaft 9 260223 1 Sheave Disk 21 S400021 1 Latch Bumper 32 S260019 1 Guide Roller Pin Kit 10 260224 1 Latch Cam 22 S332-117 1 10-24 x 3/8” Screw 33 600657 1 Hose Guide Assembly Item # Description # Req. 5600 ELS 5600 ELS-S 17 Spring Case Assembly 1 600061 600061-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 33 32 31 13 29 28 27 26 25 24 23 22 21 20 **Prior to August 2016 See online tech bulletin for more information