Redrockmicro Scout HS Quick Start Up Manual

Scout, you'll need to Calibrate your lens using the Scout HX's microRemote Keypad. Follow the instructions below. Auto Calibration Direction Forward/UP Direction Reverse/DOWN Power Indicator LEDs Position Motor somewhere in the middle of the lens' focus range. Avoid starting at either end of the focus. Press POWER button to power on Scout. e Auto Calibration: use with cinema lenses or lenses with hard stops Press the AUTO button. The motor will travel from one end of the lens to the other, then return to the position of the Fingerwheel Controller. Your lens is now calibrated. A, V Manual Calibration: use with DSLR lenses or lenses without hard stops a. Press the CAL button to enter manual calibration. b. The "Forward" LED will blink. Turn fingerwheel counterclockwise (looking from top). c. Press SET to set first focus point. The opposite LED will now blink, turn fingerwheel clockwise. d. Press SET to set the second focus point. Your lens is now calibrated. Now you can use the Scout's integrated Fingerwheel to control the Torque Motor. Press SET button at any time to reverse motor direction.