MSX megaFlashROM SCC+ SD Operation & User’s Manual

/A16 <- ASC16 /L Indicates that the ROM has no mapper and works in #0000-#FFFF area as 48K or 64K roms. /M Manual mode. OPFXSD won't indentify the ROM mapper automatically. /C Erases the ROM stored in MegaFlashROM SCC+. /C1 Fully erases the cartridge (MegaFlashROM and SD kernel) /Sxx Forces the slot where the cartridge is placed: /S1 = Slot 1 /S13 = Slot 1, subslot 3 /T[rc] Fixes the key which will avoid the execution of the ROM stored in the cartridge. ESC acts in that way by default. To select the desired key it is necessary to select the file and column of the key matrix /T64 ...

or higher with at least 128K RAM. It allows to load ROMs and DSK easily into the cartridge without using OPFXSD from command line. [Basic keys] Q: Exit Cursors: Navigate SPACE: Select file 1-9: Change current drive letter (1 = A:, 2 = B:…) RETURN: Depends on the selected file/folder. Folder: Enter folder. .ROM: Load the ROM in the cartridge. .DSK: Load the DSK in the cartridge as disk 1. .FD1 to .FD9: Load the file as disk 1 to 9. .OPF: Load a multiROM file. BS: Exit current folder (similar to CD..) C: Co ...

MULTIROM.OPF file: OPFXSD /O Command to make the multiROM specifying the multiROM file: OPFXSD FILENAME.EXT /O After booting the cartridge a menu will be show with the games in the cartridge. Before running the game it is possible to change the video and CPU modes. Controls: Cursor keys / Joystick Move Space / Fire Select TAB / Fire 2 Enter / Exit configuration ESC Exit multiROM ...

the same time, as many as they fit in the cartridge's memory, up to 511. In order to create a multiROM, you need to make a plain-text file, with the file names to load. Each file name must be in a text line and it is possible to set the mapper type after the name. Add at the end of the list the keyword [END]. In order to pause the loading process you can use [PAUSE]. Once this file is ready, you need to process the list using the option /O. If you don’t specify a multiROM file, MULTIROM.OPF will be used by default. The ROMs ...

Once the ROM is stored the cartridge will behave as if it were the original one and won't be erased even if the computer is turned off. ESC key or the one configured through /T option must be pressed while computer is booting to avoid the execution of the game. If it doesn’t work, you can erase the cartridge using the recovery mode. Press CURSOR UP while booting and select F1 option. RESET key can be hold on pressed for 5 seconds to disable MegaFlashROM SCC+ temporarily if previous system would fail for any reason. [PSG] The PSG included in the cartridge is map ...

tools at: http://www.konamiman.com/msx/msx- e.html#nextor [Boot keys] The boot time configuration of Nextor can be modified by keeping pressed some special keys while the system is booting. These keys and their behavior are: 1: Force boot in MSX-DOS 1 mode (TR: Z80 mode). 2: Force boot in MSX-DOS 1 mode (TR: R800 mode). 3: Force boot to the BASIC prompt. 4: (Turbo R only) Boot in R800-ROM mode, assign the largest mapper found as the primary mapper and free the 64K allocated for the R800-DRAM mode. CTRL: Assign only one drive ...

/ : . ; # £ Ù % 3 J I H G F E D C 4 R A P O N ? , L K 5 W Y X Z V U T S 6 F3 F2 F1 CODE CAPS GRAPH CTRL SHIFT 7 RET SELECT BS STOP TAB ESC F5 F4 8 → ↓ ↑ ← DEL INS HOME SPACE 9 NUM4 NUM3 NUM2 NUM1 NUM0 NUM/ NUM+ NUM* 10 NUM. NUM, NUM- NUM9 NUM8 NUM7 NUM6 NUM5 Russian: 7 6 5 4 3 2 1 0 0 & 6 % 5 ¤ 4 # 3 " 2 ! 1 + ; ) 9 1 V Ж * : H Х - ^ Ъ = _ $ 0 ( 8 ' 7 2 I И F Ф ? / < , @ Ю B Б > . \ Э 3 O О [ { Ш R Р P П A А U У W В S С 4 K К J Й Z З ] } Щ T Т X Ь D Д L ...

[See DSK] /I Installs cartridge’s software [See INSTALATION] /U Disables subslots and set MegaFlashROM SCC+ as unique device available. /1 Write the ROM at x1 speed instead of x4. ...