PEERLESS ACC324 Installation And Assembly

ISSUED: 08-25-08 SHEET #: 120-9056-1 Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870. Installation and Assembly: Shelf Accessory for the Corner Mount Models: ACC324(-S) Features • For use with CM50(-S), CM60(-S) or CM850(-S) • Top mounting provides open access to A/V equipment • Creates enclosed compartment when mounted at the bottom of corner mount • 25 lb weight load capacity • Available in black or silver Black Silver Description Qty. Part # Part # A shelf 1 120-1079 120-4079 B 1/4-20 x 1" round head phillips screw 4 510-9110 510-9110 C 1/4-20 serrated flanged locknut 4 530-1021 530-1021 D 1/4" flat washer 4 540-9440 540-9440 Parts List A B C D Before you begin, make sure all parts shown are included with your product. Parts may appear slightly different than illustrated.

ISSUED: 08-25-08 SHEET #: 120-9056-1 Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870. NOTE: If attaching shelf (A) to top side of corner mount, remove fasteners and support brackets from top side. If attaching shelf (A) to inside bottom of corner mount, remove fasteners and support brackets from bottom side. Remove top sets of 1/4-20 x 1" round phillips head screws, 1/4" flat washers and 1/4-20 flanged serrated locknuts as shown below. Center shelf (A) onto corner mount and align with front hole slots. Replace screw, washer and nut combination to front and rear hole slots as shown. NOTE: When reattaching support bracket, be sure flange faces downward and slot faces front. NOTE: When wall plates of corner mount are 20" from the corner of the wall, fasten one 1/4-20 x 1" round phillips head screw (B) one 1/4" flat washer (D) and one 1/4-20 flanged serrated locknut (C) through slot of support bracket as shown below. 1 2 round phillips head screw round phillips head screw flat washer flat washer flanged serrated locknut flanged serrated locknut flange Slot B D A C Attaching Shelf to Inside Bottom of Corner Mount BACK VIEW

ISSUED: 08-25-08 SHEET #: 120-9056-1 Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870. Center shelf (A) onto corner mount and align with front hole slots. Replace screw, washer and nut combination to front and rear hole slots as shown. NOTE: When reattaching support bracket, be sure flange faces downward. NOTE: When wall plates of corner mount are 20" from the corner of the wall, fasten two 1/4-20 x 1" round phillips head screw (B), two 1/4" flat washers (D), and two 1/4-20 flanged serrated locknuts (C) through slot of support bracket and center plate on both sides as shown below. 3 Attaching Shelf to Top of Corner Mount FRONT VIEW round phillips head screw flat washer flanged serrated locknut A B D C © 2008, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.