Audiovox AVD300 Owner's Manual
Text of the manual
A . Welcome
Thank you for choosing the AVD300 DVD Player. The AVD300 is de-
signed to optimize the enjoyment of your favorite DVDs in the mobile
environment. This DVD Player is constructed to provide years of reli-
able, trouble-free service. Please read this manual thoroughly prior to
operating the player and retain it for future reference.
B. Precautions
EXPLANATION OF GRAPHIC SYMBOLS
The lighting flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated ‘dangerous voltage’ within the product’s enclosure
that may be of sufficient magnitude to constitute risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the appliance.
WARNING
TO REDUCE THE RICK OF FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS PRODUCTION TO RAIN OR MOISTURE.
For safety reasons, when changing video media, it is recommended
that the vehicle is not in motion, and that you do not allow children to
unfasten seat-belts to change video media or make any adjustments to
the system. Enjoy your entertainment system but always remember
the safety of all passengers remains the number one priority.
IMPORTANT NOTICE
It is unlawful in most jurisdictions for a person to drive a motor vehicle
which is equipped with a television viewer or screen that is located in the
motor vehicle at any point forward of the back of the driver’s seat, or that
is visible, directly or indirectly, to the driver while operating the vehicle.
In the interest of safety, this system should never be installed where it
will be visible, directly or indirectly, by the operator of the motor vehicle.
1. OBJECT AND LIQUID
Do not push objects of any kind into the system through openings;
do not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.
2. DISASSEMBLE
Do not attempt to disassemble the cabinet. There is a risk of elec-
tric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system is in need of repair.
3. CLEANING UNIT
When cleaning, make sure the system is unplugged from the power
source. Do not use any solvents or cleaning materials (liquid, abra-
sive or aerosol). Clean the DVD player using only a lightly damp-
ened lint free cloth to wipe the unit if it is dirty.
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper,
tape or glue on the disc. Do not expose the disc to direct sunlight or
heat sources such as hot air ducts. Do not touch the surface of the
disc. Handle the disc by its edge. Clean the disc by wiping the disc
from the center out with a soft lint free cleaning cloth. Remove the
discfrom the unit and store it in its case after playing. Some playback
operations of discs may be intentionally fixed by software producers.
Since this unit plays discs according to the disc contents the soft-
ware producers designed, some playback features may not be avail
able. Also refer to the instructions supplied with the discs.
5. Powering the DVD Player
This system MUST be powered from the type of switched (Acces-
sory) power indicated on the marking label (i.e. not directly from the
car battery). Power should be applied to the unit when the ignition key
is in the Run and/or Accessory positions. Use only the supplied power
cable matching this set to avoid electric hazards.
6. Operation
When the temperature rises dramatically from a very low tempera-
ture, moisture may condense inside the AVD300 and cause the DVD
player to malfunction. If the AVD300 does not operate properly under
these conditions leave the AVD300 turned on for about half an hour
until the moisture evaporates.
3
1. Main Unit
2. Remote control with one CR2025 Battery
3. Power Cable
4. Two (2) Brackets with four (4) Screws
5. Owner's Manual
6. Power Adaptor* (4-Pin to 2-Pin)
Cable
7. DVRCA * Adaptor for connection to a second monitor
8. RCA Cables ( Red, Yellow, and White)
* For use with 8010730 Accessory Cable
D. Controls
Main Unit (Refer to Figure 1)
1. Power Button
2. Menu Button
3. Previous Button
4. Play & NAV Up, Down,
Left, Right Button
5. Next Button
6. Stop Button
7. Video Input Jack
8. Audio L Input Jack
9. Audio R Input Jack
10. Eject Button
11. Remote Control Sensor
12. S-Video Jack
13. Video Output Jack
14. Audio L Output Jack
15. Audio R Output Jack
16. Monitor Port 1
17. Monitor Port 2
18. DC 12V Jack
19. IR Input Jack
Figure1
12
13
14
15 19
16
17
18
1
2
3
4
5 6
7
8
9
11
10