RuggON PM-521 Quick Start Manual

Overview Accessory fn f1 f2 fn PM-521 Power Adapter 2-Point Shoulder Strap Stylus 2-Point Carrying Handle 4-Point Handstrap Hitch D-rings (Attaching straps) PM-521 fn f1 f2 fn 2 34 7 9 10 11 12 1314 8 6 5 1 15 16 1 Front camera 7 Battery LED 13 Volume + 2 FN key 8 Wi-Fi LED 14 Home key 3 F1 key 9 FN LED 15 DC-IN jack 4 F2 key 10 Power LED 16 RS-232 5 Touch screen 11 Power key 6 Barcode trigger 12 Volume - Note: To prevent damage or malfunction, always dry the touch screen when wet. 17 Securing holes 24 Kensington lock 31 Micro SIM slot 18 Rear camera 25 Pass-through 32 USB 3.0 19 Battery 26 Docking connector 33 Audio jack 20 Barcode reader 27 USB 2.0 34 Ethernet 21 NFC sensing area 28 Micro HDMI 35 Tether hole 22 Expansion bay 29 MicroSD slot 23 Stylus holder 30 Battery switch ON OFF SIM SD 3.0 2.0 ON OFF SIM SD 3.0 2.0 26 17 17 17 24 25 17 23 20 18 19 21 28 29 30 31 32 33 34 35 27 22

1. Unlock the latch. 2. Open the I/O compartment cover. 3. Take the microSD card from its packaging. 4. Insert the microSD card into the slot, making sure the beveled edge is aligned in the slot. 5. Press in until an audible click sounds. ON OFF 3. SD SIM SIM Card 1. Unlock the latch. 2. Open the I/O compartment cover. 3. Take the SIM card from its packaging. 4. Insert the SIM card into the slot, making sure the beveled edge is aligned in the slot. 5. Press in until an audible click sounds. Power On 1. Open the I/O compartment cover. 2. Switch the DIP switch to the ON position. 3. Install the external battery cover over the battery connector. 4. Press and hold the power button until the screen lights. The device runs through the start up sequence and powers up. 1. Flip open the DC-IN cover to expose the DC-IN jack. 2. Connect the AC adapter to the DC-IN port. 3. After charging, disconnect the AC adapter. 4. Replace the DC-IN cover by angling the rear side at an angle. 5. Press the front open end down in the compartment to seal in place. ON OFF 3. SD SIM ON OFF SIM