OEM Tools 25980 Operating Instructions

damage that may have occurred during transit. Check for loose, missing, or damaged parts. If any damage is observed, a shipping damage claim must be filed with carrier. Do not use the work light if it appears damaged in any way, operates abnormally or is missing parts. Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. The following safety information is provided as guidelines to help you operate your work light under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your work light. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses the equipment understands and follows these safety instructions as well. Operating Instructions and Parts Manual 25980 200 LUMENS 0 Work Light Torch Light MAX OUTPUT 100 LUMENS Work Light Torch Light MAX RUNTIME 4h 4h CREE 3W RECHARGEABLE LITHIUM-ION POCKET LIGHT WARNING Thank you very much for choosing an OEMTOOLS Product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. We strongly recommend this work light is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the work light until you have first contacted OEMTOOLS to determine if it can or should be performed on the product. 10/15 2015 OEMTOOLS

25980 CREE 3W RECHARGEABLE LITHIUM-ION POCKET LIGHT 10/15 2015 OEMTOOLS IMPORTANT INSTRUCTIONS AND SAFETY RULES 1. Know your work light. Read this manual carefully. Learn the work light’s applications and limitations, as well as, potential hazards specific to it. 2. Keep children away. All children should be kept away from the work area. Never let a child handle a tool without strict adult supervision. 3. Do not use the work light if the switch does not turn it on and off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. 4. Keep away from flammables. Do not attempt to operate this work light near flammable materials or combustibles. Failure to comply may cause serious injury or death. 5. Although eye damage from the OEMTOOLS Pocket Light is unlikely, never stare directly into the beam. 6. Do not attempt to recharge the battery by any other means than USB, via the cable provided. 7. When servicing a tool, use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury. 8. The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. DISPOSAL At the end of the useful life of the Pocket Light, dispose of the components according to all state, federal and local regulations. Battery Disposal Exposure to high temperatures can cause the batteries to explode; do not dispose of in a fire. Some countries have regulations concerning battery disposal. Follow all applicable regulations. Return used batteries to a collection location for recycling. CHARGING Fully charge the battery before first use. OPERATION The OEMTOOLS Pocket Light incorporates a small compact design and features 6 super bright LEDs. 5 SMD’s for use as an inspection lamp and 1 ultra-bright Cree 3W LED in the top for use as a directional light. A push On/0ff button is located on the front of the light. A magnetic pocket clip allows user to either clip the light to a pocket or mount to a metal surface. The Li-Ion long life battery is rechargeable via the included USB lead. MAINTENANCE 1. Always store the OEMTOOLS Pocket Light in a well-protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust or any other harmful elements. 2. Keep the Pocket Light clean by wiping with a damp cloth. 3. Inspect cable periodically, and if damaged, replace. 4. Recharge periodically when not in use. FEATURES: • Powerful magnetic pocket clip • On/Off button for pocket light and torch light • Indicator lights: green when fully charged and red when charging • High impact, rubberized ABS case for durability • PC Lens • Ergonomic hand grip for comfort 5 SMD LED lights: 200 Lumens CREE 3W light: 100 Lumens Runtime: 4 Hrs. Charge time: 4 Hrs. Lightweight: 0.2 Lbs. PRODUCT SPECIFICATIONS

25980 CREE 3W RECHARGEABLE LITHIUM-ION POCKET LIGHT 10/15 2015 OEMTOOLS NOTE Not all components of the Pocket Light are replacement items, but are illustrated as a convenient reference for location and position in the assembly sequence. Figure Description A SMD Lights B On/Off Button C Cree 3W Light D Magnetic Pocket Clip E Charging Port USB Charging Cord (Not Shown) (D) Magnetic Pocket Clip (B) On/Off Button (C) Cree 3W Light FRONT BACK (A) SMD Lights NOTE OEMTOOLS and/or its distributors have provided the parts list and assembly diagram as a reference only. Neither OEMTOOLS and/or its distributors make any representation or warranty of any kind to the buyer and/or user of this tool that he or she is qualified to do any repairs or replace any parts of this product. OEMTOOLS and its distributors expressly state that all repairs or parts replacement should be done by certified or licensed technicians. The buyer assumes all risk and liability arising out of his or her repairs or parts replacement to the original product. (E) Charging Port