August DA100C Operation & User’s Manual

Make sure the device is switched off and disconnected with the power lead. Slide to remove the battery compartment cover as shown below. push down 2) Place the batteries with “+” and “-“ poles in right direction as shown on the device. 3) Replace the battery cover, slide and push it back. Caution: The device will automatically charge batteries when connected to an external power source until fully charged. It may take up to 14 hours for 2700mAh batteries to be charged from almost flat to full. Batteries may be charged by an external and separate cha ...

a similar product but please take time to read these instructions carefully. It is designed to familiarise you with the product’s many features and to ensure that you get the very best from your purchase. To ensure your safety and the safety of others, please ensure you read the Safety Instructions before you use this product. Please ensure the product and its accessories are disposed in compliance with WEEE (Waste Electrical and Electronic Equipment) Directive and other regulations. Please check with your local autho ...

Turn off all devices before connecting or disconnecting any cables. *Note: To use the AV IN function of this device, please set it to AV IN mode first. 5. Basic Operation Connect the device to the mains power, press POWER on the remote to turn on the device, or press and hold POWER on the device for 1.5 seconds to turn it on. Press POWER on the remote to turn off the device, or press and hold POWER on the device for 1.5 seconds to turn it off. Press MODE repeatedly to select between the following modes: DTV: Freeview TV & Media Player, ...

Make sure the device is switched off and disconnected with the power lead. Slide to remove the battery compartment cover as shown below. push down 2) Place the batteries with “+” and “-“ poles in right direction as shown on the device. 3) Replace the battery cover, slide and push it back. Caution: The device will automatically charge batteries when connected to an external power source until fully charged. It may take up to 14 hours for 2700mAh batteries to be charged from almost flat to full. Batteries may be charged by an external and separate cha ...

Turn off all devices before connecting or disconnecting any cables. *Note: TheAV output function is only available in Freeview (DVB-T) and Media player mode. -10- Audio/Video output AV cable (Included) Right side of the device To video input jack (Yellow) To audio input jack (White) To audio input jack (Red) Signal flow Black Yellow White Red TV Black -9- 4.Connection 4.1 Connecting the power supply 1.Connect the DC output of the AC/DC adaptor to the DC IN 12V jack on the device. 2.Plug the power adaptor to the AC power socket. 4.2 Connecting the earpho ...

Make sure the device is switched off and disconnected with the power lead. Slide to remove the battery compartment cover as shown below. push down 2) Place the batteries with “+” and “-“ poles in right direction as shown on the device. 3) Replace the battery cover, slide and push it back. Caution: The device will automatically charge batteries when connected to an external power source until fully charged. It may take up to 14 hours for 2700mAh batteries to be charged from almost flat to full. Batteries may be charged by an external and separate cha ...

6.1 Channel Manager In Digital TV mode, select Channel Manager, press ENTER for the submenus. If the device is not in the Digital Freeview TV mode, press MODE repeatedly until it shows DTV, press LEFT or RIGHT to change . Channel Manager allows the user to sort, edit, delete, and classify the channels. 6.1.1 Channel Organizer Channel organizer is used to set favourite channels, change channel positions, lock and delete channels, and edit channel's name. 1. Channel Organizer can be accessed by selecting MENU -> Digital TV -> Channel Manager -> Channel Organizer. 2 ...

Turn off all devices before connecting or disconnecting any cables. *Note: TheAV output function is only available in Freeview (DVB-T) and Media player mode. -10- Audio/Video output AV cable (Included) Right side of the device To video input jack (Yellow) To audio input jack (White) To audio input jack (Red) Signal flow Black Yellow White Red TV Black -9- 4.Connection 4.1 Connecting the power supply 1.Connect the DC output of the AC/DC adaptor to the DC IN 12V jack on the device. 2.Plug the power adaptor to the AC power socket. 4.2 Connecting the earpho ...