Furious FPV Smart Cable Operation & User’s Manual

Tech support: [email protected] Sales support: [email protected] Website: http://furiousfpv.com/ SMART CABLE USER MANUAL VERSION 1.0

How To turn ON/OFF Smart Cable? ............................................................................... 2 Usage .............................................................................................................................. 2  Status Screen ........................................................................................................ 3  Load Screen .......................................................................................................... 3  Settings Menu ....................................................................................................... 4  LOW VOL – Low Voltage Warning ..................................................................... 4  Imax (Current Max) – Overload Warning ......................................................... 4  ALARM – The Time Warning ............................................................................. 4  CALL SIGN – Pilot Name Display ........................................................................ 4  UNITS – Temperature Display ........................................................................... 5 Support ........................................................................................................................... 5

 Ultra Convenient dual “Smart” On/Off Buttons  Designed for Rapid Battery Swaps  Short Circuit Protection Technology  Configurable Low Voltage / Over Voltage Warning Buzzer  Ultra Clear OLED Display  Multi Data Display with Call Sign, Voltage, Time, Warning, Current, Capacity & Temperature  Designed to Work with Multiple Goggle Platforms  XT60 Input Power Ready  Pronged barrel connector for DC output for better connection  Balance Wire Protection Clip  Ultra Long 125cm Wire Length How To turn ON/OFF Smart Cable? - ON: Press then press + hold the button until Load Bar on the OLED is full - OFF: At the Load Screen, press then press + hold the button until Load Bar on the OLED is empty. Also, while in setting or on “Status Screen” mode if no button is pressed , it will auto turn off. Usage The Smart Cable’s flowchart:

select Exit to come back to Status Screen. Then, press + hold button to go to Load Screen.  Status Screen Show Voltage remaining and the running texts to guide into the Settings mode.  Load Screen Show Voltage Remaining, Current Draw, Used Time, Call Sign, Temperature, Percent Battery and Used Capacity. Also, show information when having a warning. *Note: Select this mode to turn on your device Voltage Remaining The running texts to guide into Settings mode Percent Battery Call Sign & Temperature Used Capacity Voltage Remaining Current Draw Used Time

*Note: When you turn on the Smart Cable and don’t plug it into your device. After 2 minutes, the buzzer will give a warning and then shut down.  LOW VOL – Low Voltage Warning  Warning by buzzer and OLED displays “LOW VOL!” when voltage remaining is lower than the configured low voltage level.  The options are as follow: from 2.5V to 3.6V (Step Size: 0.1V) and NONE  Imax (Current Max) – Overload Warning  Warning by buzzer and OLED displays “OVER LOAD!” when current draw is higher than the configured current level and then auto shut down module.  The options are as follow: from 0.6A to 2.0A (Step Size: 0.1A)  ALARM – The Time Warning  Plug it into your device, set a time for the alarm and the buzzer will beep a few times when time comes. Then, auto shut down  The options are as follow: None/ 30min/ 60min/ 90min/ 120min.  CALL SIGN – Pilot Name Display  Configure call sign/pilot name or text to be displayed on your Smart Cable. You may utilize up to 10 alphanumeric characters and symbols.  To change Call Sign: Click button to change characters and press button to move through characters.

 Show temperature (℃/℉) on your module Support The reseller you purchased your product from handles the first line of support. If you encounter any problems with your Furious FPV products, please contact them first on issues involving equipment from other brands and general support for Furious FPV products. Please contact us if you need further assistance: Tech support: [email protected] Sales support: [email protected] Thanks for using our product