Autostart AS-2272 Installation Manual
Text of the manual
The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of the product, be that either
damage to the vehicle itself or to the unit. This unit must be installed by a certified technician using all safety devices supplied. Please
note that this guide has been written for properly trained Autostart te
Table of Contents
Introduction ............................................................ 2
Included in the Kit.................................................. 3
Installation Tools.................................................... 3
Installation Points to Remember.......................... 3
Installation Order ..................
Included in the Kit
Before beginning the installation, please review the Installation Guide —particularly the
Wiring Diagram and the Programming Options.
Note: It is very important that you familiarize yourself with the programming and operation of the
system, even if you have already installed a similar system in the past.
There ar
♦ When wiring in parallel, make sure to
isolate each connection with a diode in
order to avoid feedback and possible
damage.
Examples:
Wiring
a
clutch
bypass
and
a
transponder module to the ground out
when running wire: At the junction point,
where Ground Out when running “splits”
and goes to each device, a diode is
inserted on
The following is a suggested order for the Installation procedure. It is intended as a guide for
novices, to help make the process of installing a remote starter module easier. Time is wasted by
rewiring the module when mistakes are made. Also, the neatness of the installation is lessened
every time the module is ta
