ZiLOG Z8 Quick Start Manual
Text of the manual
ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126
Telephone: 408.558.8500 • Fax: 408.558.8300 • [email protected] • www.zilog.com
Introduction
This guide acquaints users with the Z8 Encore!™ 8K/4K MCU Evaluation Kit, and gives
instructions on setting up and using the tools to start building designs and applications.
Kit Conte
Z8 Encore!TM 8K/4K MCU
Evaluation Kit Quick Start Guide
Software (on CD-ROM)
QS002504-0603
Page 2
Software (on CD-ROM)
• ZDS II- Z8 Encore! IDE with ANSI C-Compiler
• Sample code
• Acrobat Reader install program
• Document browser
Documentation
• Registration Card
• Z8 Encore! technical documentation (on CD-ROM)
– ZDS II - IDE User Manual
– E
Z8 Encore!TM 8K/4K MCU
Evaluation Kit Quick Start Guide
Page 3
QS002504-0603
Installing the ZDS II Z8 Encore! Software
Always use a grounding strap to prevent damage resulting from electro-
static discharge (ESD).
1.
Connect the serial port of the PC to the Z8 Encore! Smart Cable DB-9 female
connector.
2.
Connect the Z8 Encore! Smart Cable to the Z8 Encore!
Z8 Encore!TM 8K/4K MCU
Evaluation Kit Quick Start Guide
Installing the ZDS II Z8 Encore! Software
QS002504-0603
Page 4
documentation. Selecting INSTALL PRODUCTS followed by INSTALL ZDS II
displays the Installation Wizard (Figure 3).
Software versions illustrated in the following figures are for reference
only. You may have an updated version.
Figure 3. Inst
Z8 Encore!TM 8K/4K MCU
Evaluation Kit Quick Start Guide
Page 5
QS002504-0603
Getting Started Using ZDS II
6.
After selecting Next>, the Register Your Software screen appears. Follow the instruc-
tions contained on the screen to complete registration.
7.
If you elected not to register at this time, a reminder screen appears after installation
asking you to re
