sescom SES-X-FA2 Setup Instructions
Text of the manual
SES-X-FA2 2-Channel Mic & Line Level Audio over Fiber Extender
AC Adapters or Battery Operated
FEATURES
2-Channel Directional, Analog Audio to Fiber Transmission
24-Bit Digitally Encoded Analog Audio, 48KHz Sample Rate
Supports Multimode Fiber up to 984 feet
Supports Single Mode Fiber up to 12.4 miles
Switchable Balanced Mi
Set Up Instructions
1. Secure the units in a safe location, where they will not be subject to impact and where there is room around the
unit so nothing will interfere with the fiber optic cabling causing it to bend sharply in a tight radius in any way that
can severely affect the signal transfer.
2. Use proper cable management and handling for routing fiber
DC Power Jack
2
3 Position Rocker Switch
3
Power LED Indicator
4
Audio Input Left
5
Audio Input Right
6
Left Channel Mic/Line Switch
7
Right Channel Mic/Line Switch
8
ST Fiber I/O
9
9V Battery Cover
1
DC Power Jack
2
3 Position Rocker Switch
3
Power LED Indicator
4
Audio Output 1 Left
5
Audio Output 2 Right
6
Fiber Link LED Indicator
7
U S E R
GUIDE
SESCOM
PO Box 720 • Mt. Marion, NY 12456 • USA
845.246.1915 • [email protected]
SAFETY PRECAUTIONS
1.
To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust. Do not use in an
unprotected outdoor installation nor any area classified as overly damp or wet.
2.
The temperature for installation should be kept
