TuffStuff Apollo Series Assembly Instructions Manual

A. Secure the looped end of the Ab/Back Cable (#9) to the bracket of the Actuator Arm (#1) using one Shoulder Bolt 3/8 X 3/4 (#58) and one Nylon Insert Lock Nut 5/16-18 (#47). See FIG. A. B. Next, route the Ab/Back Cable (#9) passing between the Pulleys 3/8 X 4 1/2 (#22-Labeled F1 & F2 ), then route under the Pulley 3/8 X 4 1/2 (#22-Labeled F3 ) . C. Route the Cable (#9) under the Weight Stack and the Pulley 3/8 X 4 1/2 (#22-Labeled F4 ). D. Next, route the Cable (#9) up and over the Pulley 3/8 X 4 1/2 (#22-Labeled F5 ). E. Affi x the Cable (#9) to the Weigh ...

A. Secure the looped end of the Ab/Back Cable (#9) to the bracket of the Actuator Arm (#1) using one Shoulder Bolt 3/8 X 3/4 (#58) and one Nylon Insert Lock Nut 5/16-18 (#47). See FIG. A. B. Next, route the Ab/Back Cable (#9) passing between the Pulleys 3/8 X 4 1/2 (#22-Labeled F1 & F2 ), then route under the Pulley 3/8 X 4 1/2 (#22-Labeled F3 ) . C. Route the Cable (#9) under the Weight Stack and the Pulley 3/8 X 4 1/2 (#22-Labeled F4 ). D. Next, route the Cable (#9) up and over the Pulley 3/8 X 4 1/2 (#22-Labeled F5 ). E. Affi x the Cable (#9) to the Weigh ...

been cut away for clarity. A C B ...

DESCRIPTION PART NO. QTY. 1 ACTUATOR ARM UP0344 1 35 FLAT PHILLIPS SCREW ZINC # 2 X 1/2 BNH1480 2 2 ADJUSTABLE FOOT PIECE UP0338 1 36 FLAT WASHER SAE B/O 3/8" BNH0239 26 3 ADJUSTABLE PULLEY BRACKET UP0127 1 37 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 1/4 BNH0273 2 4 CIRCULAR PLATE W/AXLE UP0340 1 38 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 3/4 BNH0274 5 5 FOAM ROLL 1 X 5 1/2 X 7 1/4 UP0350 2 39 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 2 BNH0279 2 6 FOAM ROLL 2 X 5 1/2 X 18 UP2031 1 40 HEX HEAD CAP SCREW GR-5 B/O 3/8-16 ...