Performance Tool W5171 Owner's Manual

STORAGE SYSTEM Stock Number W5171 OWNER’S MANUAL WARNING: This product and its packaging contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. Always wear eye protection when using tools. Please read these instructions carefully and retain them for future use. © Copyright 2016 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138 WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference. The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the product warnings and instructions shall be read and discussed with the operators’ native language by the purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information shall be emphasized and understood prior to usage. The product shall be inspected per the operating instructions. Users of this product must fully understand these instructions. Each person operating this product must also be of sound mind and body and must not be under the influence of any substance that might impair their vision, dexterity or judgment. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! If you encounter any problems or difficulties, please contact our customer service department at: 1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time. LIMITED LIFETIME WARRANTY PERFORMANCE TOOL extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state. PERFORMANCE TOOL warrants the product to be free from defects in materials and workmanship under normal use and service. A defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. These warranties shall be valid only when a sales receipt showing the date of purchase accompanies the defective product being returned. These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service. PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume any liability in connection with its products. Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL makes no express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL makes no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household use and not for commercial or business use, PERFORMANCE TOOL makes an implied warranty of merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the duration, expressly warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases. PERFORMANCE TOOL shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above limitations may not apply in all cases. © Copyright 2016 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

• 10 mm wrench 1. Place the top tray upside down on a flat surface. 2. Position one of the I-Beam frame legs on the inside of the top tray. NOTE: The tear drop shaped holes on the I-Beam should be facing in, with the larger circle portion of the openings facing down. 3. Use a large screw and nut to fasten the I-Beam frame legs to the top tray on both sides. 4. Place the base on the opposite end of the I-Beams, aligning the holes on the I-Beam with the holes on the base, and fasten with large machine screws. 5. Place the bottom bin support rail on the bottom set of holes in the I-Beams. 6. Align the holes in the base support brackets with the threaded holes on the base, and holes in the I-Beams. Fasten the top and bottom holes with two large machine screws. 7. Insert remaining bin support rails on to the I-Beams. Make sure the 3 holes in the support rails are closer to the top. 8. Align the vertical support brackets on back of the bin support rails, and secure with small machine screws. No. Description Qty. 1 Base 1 2 Base Support Brackets 2 3 “I-Beam” Frame Legs 2 4 Bin Support Rail 7 5 Vertical Support Bracket 3 SPECIFICATIONS NOTE: Specifications are subject to change without notice. Small Plastic Bins: ........................................ 36 (4-1/16 x 3-1/16 X 7-1/2 in.) Medium Plastic Bins: .................................... 12 (5-7/8 x 4-7/8 X 9-1/8 in.) Large Plastic Bins: ......................................... 5 (7-1/4 x 6-7/8 X 11 in.) Rack Height: ................................................. 49 in. Tall Rack Width: .................................................. 41-5/8 in. Wide Rack Depth: .................................................. 12 in. Deep Construction: ................................................ Powder Coated Steel LEVEL APPLICATION TILT BIN APPLICATION 9 6 1 3 2 5 4 7 8 7 7 7 8 No. Description Qty. 6 Top Tray 1 7 Large Machine Screws 20 8 Hex Nuts 8 9 Small Machine Screws 21 LEVEL TAB TILT TAB BIN SUPPORT RAIL BIN SUPPORT RAIL