Honda 08L14-E09-101 Installation Instructions

AII 39487 (0805) 1 of 4 INSTALLATION INSTRUCTIONS Accessory Application Publications No. Issue Date MAY 2008 08L14-S9V-1000-91 2009 PILOT BICYCLE ATTACHMENT (HITCH MOUNT) P/N 08L14-E09-101 PARTS LIST Bicycle arm bracket Bolt, 12 x 40 mm 4 Bolts, 8 x 70 mm 4 Washers, 8 mm Flat washer, 12 mm Lock washer, 12 mm 4 Nuts 4 Nut covers Tie-down bar 2 Clamps 2 Spacers 2 Socket bolts, 6 x 55 mm Hex wrench 4 Straps TOOLS REQUIRED Ratchet 13 mm and 19 mm sockets AII 39487 Upright assembly Put this information in the glove box with the vehicle owner's manual. www.collegehillshonda.com

AII 39487 (0805) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. INSTALLATION NOTE • Be careful not to damage the finished surfaces of the body when installing the bicycle carrier. • No more than two bicycles should be carried on the bicycle attachment. 1. Slide the upright assembly into the trailer hitch receiver until the hole in the tube lines up with the receiver hole. Install the 12 x 40 mm bolt with lock washer and flat washer through the receiver hole. Tighten the 12 x 40 mm bolt securely. 5. Align the tie-down bar and two clamps with the upright assembly, then secure with the two socket bolts and two spacers. 6. Turn the tie-down bar 90° in the direction shown. This is the stored position. 2. Lower the bicycle arm bracket onto the upright assembly as shown. 3. Assemble the 8 x 70 mm bolts, 8 mm washers, and nuts as shown. Tighten all four bolts securely. 4. Install four nut covers. UPRIGHT ASSEMBLY 6 x 55 mm SOCKET BOLTS 2 SPACERS TIE-DOWN BAR CLAMPS TIE-DOWN BAR TRAILER HITCH RECEIVER 12 x 40 mm BOLT UPRIGHT ASSEMBLY LOCK WASHER FLAT WASHER BICYCLE ARM BRACKET 4 8 x 70mm BOLTS 4 NUTS UPRIGHT ASSEMBLY 4 NUT COVERS 4 8 mm WASHERS www.collegehillshonda.com

AII 39487 (0805) 3 of 4 Loading the Bicycles 1. Load the heaviest bicycle first onto the innermost cradle. The cradles can be rotated or shifted on the bars to accommodate different bicycle geometries. 2. When loading two bicycles, alternate the direction of the bicycles. 3. Tighten the bicycle arm straps securely around the bicycle frame. CRADLE BICYCLE CRADLE BICYCLE BICYCLE BICYCLE ARM STRAPS BICYCLE ARM STRAP www.collegehillshonda.com

AII 39487 (0805) © 2008 American Honda Motor Co., Inc. - All Rights Reserved. BICYCLE CARRIER 4. Using the straps provided, secure the bicycles to the tie-down bar (either through the bicycle wheels or the frame). • Secure the inner bicycle to the position on the tie-down bar. • Secure the second bicycle to the or position on the tie-down bar. • Secure the strap buckle as shown. Opening the tailgate 1. All bicycles must be removed to lower the carrier. Rotate the tie-down bar 90° then firmly hold the upright assembly with one hand. Release the safety hook by pulling outward on the untethered end. Slide the pin out while supporting the upright assembly. STRAP STRAP BUCKLE UPRIGHT ASSEMBLY TIE-DOWN BAR PIN 2. Gently lower the bicycle carrier to the stop position. www.collegehillshonda.com