AT&T Partner MLS 12D Quick Reference Manual

Record System Speed Dial numbers—programmed only at extension 10—in the boxes below. To dial a System Speed Dial number: Press [ Feature ] followed by the Dial Code. Dial Dial Dial Code Name Code Name Code Name 20 40 60 21 41 61 22 42 62 23 43 63 24 44 64 25 45 65 26 46 66 27 47 67 28 48 68 29 49 69 30 50 70 31 51 71 32 52 72 33 53 73 34 54 74 35 55 75 36 56 76 37 57 77 38 58 78 39 59 79 System Extension Numbers Use the boxes below to record the extension number assignments in your system. To dial an extension number: Press [ Intercom ] followed by the extension number. Example: to call extension 11, press [ Intercom ] [ 1 ] [ 1 ] . Ext Name Ext Name 10 16 11 17 12 18 13 19 14 20 15 21 518-455-152 Copyright © 1993 AT&T

Display [MLS-18D and MLS-12D only] When making a call, shows the number dialed and duration of call. When receiving an intercom call, shows the number of the extension calling. When not using the phone, displays today’s date and time. (You can adjust the display contrast on the MLS-18D–see “Volume Con- trol Buttons” below right.) Calling Feature Buttons MLS-18D, MLS-12D, and MLS-12 only] These four buttons, from left to right are pressed to use the following features: Privacy, Last Number Redial, Recall, and Conference Drop. See p. 5. Line Buttons Press to make or answer outside calls. Green and red Iights next to each button show what is happening on the Iine. See “Lights,” p. 4. Intercom Buttons Press either button to make or answer an inside (intercom) call to another extension. Auto Dial Buttons MLS-18D, MLS-12D, and MLS-12 only] Stores outside or intercom Auto Dial numbers for dialing with one touch. See p. 4. Spkr (Speaker) Button On MLS-18D, MLS-12D, and MLS-12 phones, press to dial and speak on your phone without lifting the handset. When you press [ Spkr ], both the speaker and the micro- phone come on (indicated by the lights next to the [ Spkr ] and [ Mic ] buttons). When the party on the other end answers, you can speak without lifting the handset. (On the MLS-6, press to did without lifting the handset; when the party answers, lift the handset to speak.) Speakerphone Hint: For more conveniet speakerphone operation, leave the microphone on all the time (press [ Mic ] if the light next to the button is off). When you receive a voice-signaled call (you hear a beep), the person calling can talk to you over your phone’s speaker; simply begin speaking to have a hands-free, two-way conversation. Mic (Microphone) Button MLS-18D, MLS-12D, and MLS-12 only] Press [ Mic ] to turn your microphone on and off. When the green light next to the button is on, the microphone is on and the person on the other end of a call can hear you. To answer calls without lifting the handset, leave the micro- phone on (see “Speakerphone Hint” above). On a speak- Feature Button erphone call, press [ Mic ] to mute your voice. [Labeled "Feat" on MLC-6] Press to dial Speed Dial numbers (p. 1.); to store Auto Dial numbers (p. 4); and (on MLS-6 phones only) to access the Last Number Redial Recall, and Conference Drop features (p. 5). Conf (Conference) Button Press to add other parties to your call (p. 6). Transfer Button (Labeled ”Trans” on MLC-6] Press to transfer an outside call to another extension (p. 6). Hold Button Press to put a call on hold (p. 6). Message Light Flashes to show current settings while changing option settings. Volume Control Buttons Press to decrease ( M ) or increase ( L ) the volume of the ringer, speaker, and handset. To adjust ringer volume, while phone is idle and hand- set is on the phone, press M or L . To adjust speaker volume, press M or L while listen- ing to a call through the speaker. To adjust handset earpiece volume, press M or L while listening to a call through the handset. To adjust display contrast on an MLS-18D phone, when the phone is idle and the handset is on the phone; press [ * ] ; then press M to decrease the bright- ness, or L to increase the brightness. 2 3

Ring...Ring...Ring...Ring..Ring...Ring... Outside Call Ring-BEEP...Rlng-BEEP...Ring-BEEP... Inside Call Ring-BEEP-BEEP...Ring-BEEP-BEEP... Transferred Call Lights Red (top) Iight shows what is happening on the line at ANOTHER extension Green (bottom) Iight shows what is happening on the line at YOUR extension. Steady on: Line is busy. Off (off continuously): Line is idle, available for use. Flash [long on, long off): Call is ringing on the Iine. Alternating Red/Green Flash: (red on, green on, red on, green on) Appears at all extensions in a conference or joined call. Wink (long on, short off): Call is on hold (anyone with line can pick up). Flutter (short on, short offf): Conference call is on hold. Help! If you have problems with your phone, contact your System Manager. If the problem is not solved, in the continental U.S. please call our toll-free Heipline, available 24 hours a day, at 1 800 628-2888. Outside the continental U.S., contact your local AT&T Authorized Dealer. Auto Dial Numbers To store an extension number or outside number for one-touch dialing: 1. Press [ Feature ] [ 0 ] [ 0 ] . 2. Press a programmable Auto Dial button (see p. 3). 3. Press left [ Intercom ] and dial the extension number, or dial the telephone number up to 20 digits, including special functions, see box below. (To set up an Auto Dial button for group paging, press [ Intercom ] [ * ] [ 7 ] .) To store additional Auto Dial numbers, repeat Steps 2 and 3. 4. Press [ Feature ] [ 0 ] [ 0 ] when you are done. To insert a... Press... Pause (1.5 seconds) Recall Stop Touch-Tone Enable [ Hold ] [ Spkr ] [ Mic ] [ Transfer ] 4

[ Line ] or 1. Press the [ Line ] or [ Intercom ] button next to the flashing light. [ Intercom ] 2. Lift the handset. (If you Iift the handset without first pressing a line button, you are connected to the line that has been ringing the longest time.) To answer a voice-signaled call (your phone beeps): 1. If the microphone is on, begin speaking (if not press [ Mic ] or lift the handset). Joining a Call To connect yourself to an outside call being conducted at another extension: [ Line ] 1. Press the [ Line ] button next to the steady red light. 2. Lift the handset. NOTE: you cannot join an outside call, a conference call, or a call at an extension with Privacy turned on. Calling Features To use these features on an MLS-18D, MLS-12D, and MLS-12 phone, press the calling feature button. To use on an MLS-6 and MLC-6 phone, press [ Feature ] plus the 2-digit code. Feature How to Use on MLS-6 and MLC-6 How to Use on MLS-18D, MLS-12D, and MLS-12 Description Privacy Last Number Redial Recall Conference Drop Not Available Press [ Privacy ] Press again to turn off Press [ Feature ] [ 0 ] [ 5 ] Press [ Last Num ] Prevents other people with the same line from joining your calls. A steady green Iight next to [ Privacy ] shows that Privacy is on. Redials the last outside num- ber you dialed. Useful for redialing a busy number. "Recalls" a dial tone. If you are not on a PBX or Centrex, use Recall to end a call without hanging – you will get a dial tone and can then make another call. Otherwise, use Recall to get the PBX/Centrex dial tone. Press [ Feature ] [ 0 ] [ 3 ] Press [ Recall ] Press [ Feature ] [ 0 ] [ 6 ] Press [ Drop ] Drops the last party added to a conference call. 5

Outside: [ Line ] + Phone Number Inside—Ringing: [ Intercom ] + Extension Number Inside—voice-signaling: [ Intercom ] + [ * ] + Extension Number [ Intercom ] + [ * ] [ 7 ] Making a Conference Call Telephone or Extension Number + [ Conf ] + Telephone or Extension Number + [ Conf ] To Drop: [ Drop ] (MLS-18D, MLS- 12D, and MLS-12) or [ Feature ] [ 0 ] [ 6 ] (MLS-6 and MLC-6) Putting a Call on Hold To Hold: [ Hold ] To Pick Up: [ Line ] To call an outside party: 1. Press an idle (not lit) line button. 2. Lift the handset. 3. Dial the telephone number. To call an inside party (another extension): 1. Press an idle (not lit) [ Intercom ] button. 2. Lift the handset. 3. To ring the extension, dial the two-digit extension number, (or to voice signal an MLS-model phone’s speaker, dial [ * ] plus the extension number). NOTE: If you lift the handset without pressing a button, you get the first available line or the intercom, depending on your phone’s automatic line selection. To page all extensions with MLS-model phones: 1. Press an idle (not lit) [ Intercom ] button. 2. Dial [ * ] [ 7 ] . When you hear a beep, speak into the handset. Your voice is heard on all MLS phone speakers. If a user picks up, the page becomes an intercom call to that user. To add parties to a call (max. 2 parties plus you): 1. Call the first party (can use Speed Dial or Auto Dial buttons). 2. After the first party answers, press [ Conf ] . 3. Press an idle line button and call the second party (or press [ Intercom ] and dial an extension number to add an inside party). 4. After the second party answers, press [ Conf ] again. You are connected with both parties. The lights at all extensions in the conference flash red and green. To drop the last party added to the call: On MLS-18D, MLS-12D, and MLS-12 phones: Press [ Drop ] . On MLS-6 and MLC-6 phones: Press [ Feature ] [ 0 ] [ 6 ] . NOTE: You cannot add more than 2 other parties, transfer a conference call, or join a conference call. To put an outside or intercom call on hold: 1. Press [ Hold ] . To pick up a held call: 1. Press the held line button. 2. Lift the handset. Transferring a Call To pass a call to another extension: [ Transfer ] + 1. Extension Number 2. 3. While active on the call, press [ Transfer ] . The call is put on hold and you hear intercom dial tone. Dial the extension to which you want the call transferred. When someone answers, announce the call, then hang up. If no one answers or the call is refused, to reconnect to the caller, press the line button next to the winking green light. 6